Question about Washing Machines

2 Answers

<!-- from fixya rte -->Fabric conditioner goes straight through - Washing Machines

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

In what kind of machine and in what way? Are you sure you're putting it in the right chamber?

Posted on Nov 25, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Fabric softener can build up in a machine and cause problems so my suggestion is to quit using it and switch to dryer sheets instead. An alternative is to use sponges with your liquid softener. Click on this link: http://lifecheating.com/2013/11/16/never-ending-dryer-sheets/

Posted on Nov 25, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't washing machine use the fabric conditioner


Usually this occurs when the siphon is clogged.

Try pouring warm water into the fabric conditioner tank.

Alternatively, carefully put a piece of kitchen paper towel in the fabric conditioner and run a cycle to see if the paper towel is damp. If not damp, then the washing machine isn't sending water into the conditioner tank.

Jan 29, 2015 | Washing Machines

2 Answers

Keeps breaking needles


Slow down and watch what you sew over.
No needle is going to sew through the metal part of a zipper.
With many layers of fabric you have to slow down. If you have multiple layers of a thick fabric you may have to resort to using the hand wheel to get through the layers.
Another tip would be to not pull on the fabric. The machine is capable of "feeding" the fabric at the rate it requires. When sewing with many yards of fabric the weight of the fabric may create a pull on the needle. If the needle is pulled so that it no longer goes through the need plate properly it will hit the metal of the needle plate and break. Instead rest your hands on either side of the fabric and gently steer the fabric. Do not pull it out of the back of the machine or shove it into the needle. With large yardages wad up the fabric around the machine so that the weight of the fabric isn't causing strain around the needle.
One other tip. If you have a needle plate in your machine that only supports straight stiching, that is one with a needle hole that is just big enough for the needle to move up and down, and you switch to a zig-zag stitch, you will break the needle. Most factory installed needle plates have a needle hole large enough to support the largest zig-zag that the machine can support. But some machines have custom needle plates (for quilting) that only support a straight stitch.

Dec 08, 2014 | Sewing Machines

1 Answer

Singer sewing machine needle moving to the side after it's in the fabric for a zigzag stitch


If you can grab the hand wheel and move it right and left, then it probably needs a plastic collar that goes next to the left upper shaft bushing.
If not then the cam timing needs to be adjusted.

Mar 13, 2014 | Kenmore 15516 Mechanical Sewing Machine

2 Answers

Hey, in which dispenser number do you put washing powder and fabric softer 1 or 2? Thanks


1 is usually for pre-wash, 2 for washing powder and fabric softner goes into the section with the level indicator should be small square section with removable top.

Feb 28, 2011 | Hotpoint Ariston AW125 Front Load Washer

2 Answers

I have a Hotpoint BWD129 washer/dryer and it appears to be overflowing during its second rinse (the water is coming out underneath the tray where the fabric softener goes in).. It is as though the...


Hotpoint BWD129 This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 19, 2011 | Washing Machines

2 Answers

Fabric conditioner not taken or not dispensed.


take out the drawer that the powder and conditioner goes in. the conditioner spout to allow the liquid to empty from the drawer will be blocked with a mixture of powder and conditioner. clear it thru with a sharp screwdriver or similar and wash under the tap. replace back in place should empty fine then. hope this helps.

Apr 12, 2009 | Washing Machines

3 Answers

Fabric conditioner drawer


Try cleaning inside the the machine where the soap dispenser drawer fits into. Sometimes this builds up with lots of soap and fabric conditioner residue and stops the conditioner from going through.
Take the drawer back out and look inside where it goes to see if there is a build up of soap etc...
hope this helps

Nov 03, 2008 | Miele W865 Front Load Washer

2 Answers

Fabric conditioner still in draw after wash cycle



This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 25, 2007 | Zanussi FJD1466S Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...