Question about Canon Pixma MX360 Printer

1 Answer

Canon MX360 shows code 6000. Have switched of printer and computer and the error is still there. What do i need to do?

Switched pc and printer off

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Sounds like the gearing is out of sync. When you remove debris did you force any of the geared rods? some times if a printer has been jammed by debris i.e. your paper clip, the gearing gets out of sync as gears jump teeth. In the past I've rectified this problem by rotating gearing manually. Its a hit and miss method. try it " WITH NO POWER " to the printer. Put a sheet of paper in tray and rotate gearing by hand and watch closely all movement, pick up rollers, paper feed, head movement path etc. you'll get a feel for it .
once you get paper feeding manually try it with power.
good luck.

Posted on Nov 26, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 32 Answers

SOURCE: canon mx310 error code 6000

Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing **** disk film or the printer's logic board.

Posted on May 28, 2009

pineworks
  • 4041 Answers

SOURCE: printer error code 6000

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


  1. Start with printer off
  2. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
  3. While holding the Power button, release the Resume Button.
  4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
  5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
  6. Turn off the printer and turn on again
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Apr 26, 2010

  • 284 Answers

SOURCE: My Canon MP980 is showing Printer Error code 6000....

error [6000] or light blinking 3 times is mean there is an error occurred in the LF encoder signal.

Posted on May 27, 2010

  • 95 Answers

SOURCE: my printer canon mp258 show error 6000, how can I

You will need to reset your printer and this printer requires a software resetter fo many of its error codes. The newest and best available resetter with full instructions is available here.
Just follow the easy instructions and download their service tool and this should reset any error codes or problems you are having with the printer.
Hope this solves your issue.

Posted on Feb 20, 2011

Angel Bird
  • 287 Answers

SOURCE: new printer canon pixma mx360....... when i pushed

Hello and Welcome to FixYa!

If you are facing Error 5100 then it means that the cartridge can not be detected by the printer.
Actually the printer is not actually loading the cartridge and showing you the Error 5100.

To solve this error follow the given steps:-

First of all turn off printer
then remove both the cartridges from the printer.Use a clothe moistened with alcohol to clean the surface contact on the cartridges where the terminals inside the printers touches. After it return the cartridges and turn on the printer.Error will be automatically remove

I hope this solution helps you
Let me know If you have any more Confusion, questions or issue regarding your problem
Thank you and Keep using FixYa!

Posted on Jul 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i clean drum of mx 360


The Canon MX360 doesn't have a drum. The printhead and platen can be cleaned through the maintenance programs built in.

Sep 20, 2014 | Canon Pixma MX360 Printer

1 Answer

Scan. code 5,156,69 Documents cant scan


It could be a driver problem, but you do not mention what operating system you are using.

May 11, 2014 | Canon Pixma MX360 Printer

1 Answer

Error code 6000


Go To Below official Canon Printer Page For Your problem http://forums.usa.canon.com/t5/errors/FilterErrorHandlerPage Hope It's resolve all Your Printer Problem,
Or

Still having Problem Then follow Us ForCanon Printer Support

Mar 12, 2014 | Canon Pixma MX360 Printer

1 Answer

I misplaced the cd for my canon mx360 to hook my computer up to the printer. can i download to my laptop?


Karen, here is the web site you can download the right drivers for your MX360.. Just follow the Instructions on the Screen by selecting your Operating System and continue to download the Drivers for your system. Then Install the Drivers Software and you should be ready..
MX360 Web Site:
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx360?selectedName=DriversAndSoftware

Mar 29, 2012 | Canon Pixma MX360 Printer

1 Answer

New printer canon pixma mx360....... when i pushed the botton on it says printer error has occurred 5100


Hello and Welcome to FixYa!

If you are facing Error 5100 then it means that the cartridge can not be detected by the printer.
Actually the printer is not actually loading the cartridge and showing you the Error 5100.

To solve this error follow the given steps:-

First of all turn off printer
then remove both the cartridges from the printer.Use a clothe moistened with alcohol to clean the surface contact on the cartridges where the terminals inside the printers touches. After it return the cartridges and turn on the printer.Error will be automatically remove

I hope this solution helps you
Let me know If you have any more Confusion, questions or issue regarding your problem
Thank you and Keep using FixYa!

Jul 18, 2011 | Canon Pixma MX360 Printer

1 Answer

My Canon MP980 is showing Printer Error code 6000. Have turn off machine and turned on again - no change - still showing.


error [6000] or light blinking 3 times is mean there is an error occurred in the LF encoder signal.

May 20, 2010 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Canon mx310 error code 6000


Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing **** disk film or the printer's logic board.

May 22, 2009 | Canon PIXMA MX310 All-In-One Printer

2 Answers

Error code 6000 on canon pixma mp210 stops me from printing


Hi,
Error 6000 means - The specified file could not be encrypted.
Solution: reinstall the printer driver.... it's better to install a upgraded version of driver...
Good Luck!!!

Mar 19, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Canon Pixma MX360 Printer Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2012 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...