Question about HP Photosmart 6510 Wireless e-All-in-One Printer
Poured rubbing alcohol down the screens in the cartridge cradle.
Dip the nozzles side of the catridge in ammonia solution for two hours clogged ink will be dissolved and the nozzles are free.
Posted on Nov 25, 2014
Testimonial: "Thanks for the answer, but the inkjets are in the cradle not on the bottom of the inkjet cartridge. I need to know how to get the cartridge out of the machine. I can get it unsnapped but I can not get it out of the machine because a plastic bar runs across the top that is part of the framework of the printer. I suppose I could unscrew the top of the printer, but that looks like a nasty job."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just had the same problem...and this is what I did to get it working...
Turn off your printer. Open the top. Push the cartridge thingie off to the side (if possible) and then take QTips and cleaned the silver bar the cartridge moves on. Got a lot of ink off of it.
Should run after that.
Posted on Jul 12, 2008
SOURCE: print cartridge cradle is stuck
" CARTRIDGE SEVICE STATION IS STUCK " with a blinking red light...
it's a bit difficult...just fixed it today....
first of all...u have to be sure that your service station is clear from any other old ink that maybe dried....that stuck the movement of the service station...
if it doesn't work again...folow the next step...
1. u have to pull out the service station... ( the difficult one ..!!! )
2. under the service station, there is a small motor....just find a new one and change it..
.....i found this new motor in an old hp printer's service station that i have...
Posted on Jul 25, 2008
You need to check the encoder strip, the clear plastic behind the carriage, ink or grease will stop it from reading and give that error. Also ink buildup on the clean station will slow it's travel.
Posted on Dec 22, 2009
Apparently some defective components were used in the construction of the logic board (see photo). On my C6180 there were 3 failed capacitors (the green cylinders - the puffed top indicates failure) and a 4th from the same manufacturer (TEAPO - many unfavorable web references to this manufacturer). I purchased 3x 330uF 16V and 1x 680uF 10v rated to 105 degrees Celsius (total about 60cents). On the logic board, the capacitors I replaced are labeled C613, C614, C660 and C662. If you are not comfortable replacing the parts yourself (or don't have a soldering tool), you will have to find someone who will. The time to repair should be less than 30 min - I did it in 25 min with only a solder pen. This also fixed the ink system failures the printer was having. A similar fix may apply to other printers produced by HP around this time.
Posted on Oct 03, 2010
Tips for a great answer:
Jan 05, 2016 | Epson Inkjet Multifunction Machines;...
Mar 24, 2013 | HP Photosmart 6510 Wireless e-All-in-One...
Aug 30, 2012 | HP Photosmart C7180 All-In-One InkJet...
Nov 29, 2011 | HP Photosmart C6180 All-In-One InkJet...
Dec 10, 2010 | HP Photosmart C4180 All-In-One InkJet...
Oct 18, 2010 | Epson Stylus Photo 785EPX InkJet Printer
Aug 03, 2009 | HP Office Equipment & Supplies
Mar 27, 2009 | HP Officejet J4680 InkJet Printer
Apr 02, 2008 | Office Equipment & Supplies
Dec 17, 2007 | HP PhotoSmart 7550 InkJet Printer
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: