Question about Dual Xdma6540 Car Stereo Receiver

1 Answer

Changed car battery and the dual car stereo won't work now. reset the stereo and the security light is flashing and the stereo still won't work?

We had the face plate off the stereo when we change out the car battery. reset the stereo and the security light was still flashing after we did the reset? the stereo still doesn't work? please help what we can do to fix this problem. thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Your solution depends on the brand and model number of your stereo system I take it your stereo system is Ruth is included in a anti-theft device this is highly technical and manufacture specific you need to follow the instructions for installing the system initially somehow your system lost sanity. You need to unplug the fuse that goes to your stereo turn your stereo switch on and let it sit for a day then return with the users manual and go through the installation sequence that has to do with connecting power and setting default settings other than that you have to contact the manufacturer

Posted on Nov 26, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Safari SLT, security system gone wild


Have the fault codes read. Have a load test done on the battery as all the faults could be low battery voltage or failing battery

May 18, 2013 | GMC Safari Cars & Trucks

1 Answer

Security light was on, now car won't start


the vehicle is in lock down notify a dealer

Apr 15, 2013 | 2004 Buick LeSabre

1 Answer

2004 Hyundai Tiburon radio won't work after car battery change


Hi,
Probably has a security code. It's in the owner's manual or you'll have to take it to the dealer.

GL,
td

Oct 08, 2012 | 2004 Hyundai Tiburon

1 Answer

The 'theft system' light does not turn off with the key in the run position on my 1999 chevy cavalier. car won't start, it won't even crank over. the battery and the starter are brand


try locking your car with the key and unlocking it with the key, leave it for 30 second or so between the locking and unlocking , the car thinks some one has tampered with it

Mar 18, 2012 | 1998 Chevrolet Cavalier

1 Answer

How do I reset the security theft on a 1990 pontiac bonneville


This link will help you out. Has alot of information on the system.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Dec 22, 2011 | Cadillac DeVille Cars & Trucks

2 Answers

SECURITY LIGHT FLASHING


I will strong recommend you, to inspect the wiring polarity.

2) The positive + with respective wire and ground or negative with respective ground.

3)Tight very well each connection.
4)Clean each connection from Oxide( very important)
5)Test the circuit breaker or fuse and reset or replace it.
6)If the problem persist. You must go to inspect the battery and Starter from your supplier company.

sincerely. G-b bless you.

ernesto cuadra

Dec 17, 2011 | 2002 Oldsmobile Alero

1 Answer

I have a 2001 Olds Intrigue that won't start every once in a while. When it won't start the security light flashes so GM told me it was the passcode and I would have to change the ignition switch...


you can not bypass the security in that car, it is built into the main computer, they have problems with the ignition switch screwing up and the only way to start it while the light flashes is to turn the key to ON but don't crank engine, leave on for 10 to 15 minutes until light goes out then start car.

Sep 21, 2011 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
Dual Xdma6540 Car Stereo Receiver Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dual Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

75235 Answers

Are you a Dual Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...