Question about Sharp Computers & Internet
I cant find a service manual for restore to factory default the printer and change the admin password (for web login and display admin login). I really need that for change various settings. Actually there is a custom password. (default should be admin admin). Thanks for the Help. Have a good day
Download the manual here: http://dl2.opendrivers.com/dl_file.php?dl=dl2&brand=multifunction%2Fsharp-electronics&file=MXM282N-M362N-M452N-M502N_OM_Online-Manual_GB.pdf&check=a35c9re0e86ed5&driver=cs6f4548 dl2 opendrivers com
Posted on Nov 25, 2014
Testimonial: "I cant change password without the current password (ofc...) so there must be other methods... :\"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Default username for 5461 maxg
Hello, The easiest way to correct it to reset router back to default. Reset hole/button on back need to be held in 10-15 seconds. 5 seconds or less and it will reboot router. Once it is reset to default use 192.168.1.1 for address and "admin" for password. Leave usename blank. After in settings these can be changed. Hope this helps.
Posted on Mar 27, 2008
Hi, logon to your router using IE or whatever browser. Then follow these steps and let me know.
You are prompted for a Username and Password.
Type the username: admin
Type the password: admin
Click the OK button.
The Dell TrueMobile Setup Page appears.
Click the Advanced Settings tab.
A note appears stating that Dell provides the advanced features for your convenience only. Dell technical support representatives can not support the configuration options in the Advanced Settings portion of the setup program.
Click the OK button.
Click the Administration Settings button on the left side of the page.
Put a check in the box to the left of the Change Your Password setting under the section of the page titled Password Settings.
Type the password that you want to use in the New Password field.
Retype your password in the Retype Password field.
Click the Submit button.
Another window appears stating You have successfully submitted the settings to this device!
Click the Save and Restart button.
Your new password will be saved into the router settings.
Posted on Nov 29, 2008
SOURCE: DI-624 can't login as admin
I was ready to give it up and pitch the thing, but I found this on another board and it worked:
login - admin
password - password (not blank)
Posted on Jun 08, 2009
from the control panel update firmware to latest http://en-us-support.belkin.com/app/answers/detail/a_id/526/kw/n150/r_id/166
There ware a bug similar to this in the previous firmware version. Let me know if it works. Cheers...
Posted on Sep 14, 2009
Tips for a great answer:
Jul 09, 2015 | Sharp Office Equipment & Supplies
Mar 12, 2015 | Sharp Mx-4501n mx4501n
Feb 23, 2015 | Sharp MX-2300N Color Copier
When you first enter the printer menus from the operator panel, you may notice an asterisk (*)
next to a value in the menus. This asterisk indicates the factory default setting. These settings
are the original printer settings. (Factory defaults may vary for different countries.)
When you select a new setting from the operator panel, the Saved message appears. When
the Saved message disappears, an asterisk appears next to the setting to identify it as the
current user default setting. These settings are active until new ones are stored or the factory
defaults are restored.
To restore the original printer factory default settings:
1 Make sure the printer is on and the Ready message appears.
2 Press Menu until you see Utilities Menu, and then press Select.
3 Press Menu until you see Factory Defaults, and then press Select.
4 Restore appears on the second line of the display.
5 Press Select.
The message Restoring Factory Defaults appears followed by the Ready
When you select Restore:
• No other button actions are available on the operator panel while Restoring
Factory Defaults appears.....
May 01, 2014 | Lexmark X658DE All-In-One Laser Printer
1) Press the [SYSTEM SETTINGS] key.
2) Touch the [Admin Password] key.
3) Touch the [Password] text box and enter the administrator
password. Which should be admin all lower case.
4) Touch the [OK] key.
5) Displays the system setting key on the touch panel.
Then find the soft key that says
Initialize and/or Store Settings
Under that should be a key that says restore factory defaults.
Sep 12, 2011 | Sharp MX-2300N Color Copier
Mar 02, 2011 | Computers & Internet
Dec 17, 2010 | NetGear WNR2000 Wireless Router
May 12, 2010 | Sharp AR-M237 Copier
Dec 18, 2008 | Sharp MX-2300N Color Copier
274 people viewed this question
Usually answered in minutes!