Question about Canon Cannon Powershot A1200 12.1mp 4x Zoom Camera Silver4gifts1 Year Warranty
Did you try to press the display button several times? You then switch between different modes, while shooting and while playback. One of the modes is screen out.
Posted on Nov 24, 2014
Testimonial: "yes i try it but nothing happen so please can you tell now what i will do to fix this problem thanks and best regards"
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There is a recall on these cameras. Canon will fix for free and pay for all shipping costs. They have been very helpful.
Service Notice: CCD Image Sensor Advisory (Updated 10/31/2006)
PowerShot S1 IS
This Service Notice will update Canon U.S.A., Inc.'s previous CCD Image Sensor Advisory, dated October 6, 2005.
It has come to our attention that the vendor-supplied CCD image sensor used in certain Canon digital cameras and digital video camcorders may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all. While reports of this malfunction have been rare in the United States, we have determined that it may occur if the product is exposed to hot and humid environments.
Notice of Additional Affected Products:
As a result of our continuing investigation of this malfunction, we have determined that the 11 models listed below, in addition to the 16 models listed in our Service Notice concerning this malfunction, dated October 6, 2005, may be affected.
- Camcorders: ZR60, ZR65 MC, ZR70 MC, ZR80, ZR85, ZR90, ELURA 40 MC, ELURA 50
- Digital Cameras A60, A70, A75, A300, A310, S230, SD100, SD110, A40(*), A80(*), A85(*), A95(*), S1 IS(*), S60(*), S200(*), S330(*), S400(*), S410(*), S500(*)
*Models added as of Oct.31, 2006
It has been confirmed that the connecting parts of the internal wiring of the CCD used in affected products may become disconnected, especially if the affected products are stored or used in high-temperature and high-humidity environments. If this occurs, the signal is not output from the CCD normally in Shooting Mode, which may cause a distorted image or the absence of an image. This malfunction can be confirmed on the LCD monitor screen during shooting. The same malfunction also appears on the recorded image.
Effective immediately, and regardless of warranty status, Canon will repair, free of charge, the products listed above exhibiting the above-mentioned malfunction if Canon determines that the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair.
Canon Customer Support Center for further assistance at 1-800-828-4040. Support hours are Monday thru Friday - 8:00 AM to 12:00 midnight; and Saturday 10:00 AM to 8:00 PM (all times EST). Alternatively, if electronic support is preferred, please send your email to email@example.com
Posted on Nov 22, 2008
Did you accidentally press the DISP button on the back of your camera? This manually turns the screen on and off to save batteries. Try pressing this button one more time to see if it turns the screen back on.
Posted on May 27, 2009
Nonononooooo fotomohamed, he can review just taken pictures on the LCD. The screen is working.
Actually, it sounds like you just accidentally pressed the DISPLAY button on the back of your camera. This manually turns the screen on and off in picture taking mode to save batteries (you would then use optical viewfinder). Just press it once and it should turn back on.
Posted on Jul 04, 2009
Its known problem of ccd imager in Canon A60 camera and Canon will repair it free of cost.
Click Canon CCD Imager Advisory for details.
Posted on Jul 24, 2009
Place the camera in P, Tv, Av, M, Movie, or Stitch-assist mode. Press the Func/Set button, and scroll down to the "My Colors" icon on the left side (second or third icon down, should show "My Colors Off" at the bottom of the LCD). Now use the left/right buttons to select "B/W", and press the Func/Set button again.
Posted on Mar 16, 2010
Tips for a great answer:
Mar 07, 2012 | Canon Rebel Cameras
May 02, 2010 | Canon PowerShot SD750 / IXUS 75 Digital...
Jul 24, 2009 | Canon PowerShot A60 Digital Camera
Jun 19, 2009 | Canon PowerShot SD1000 Digital Camera
Mar 26, 2009 | Canon PowerShot A75 Digital Camera
May 28, 2008 | Canon PowerShot A75 Digital Camera
Apr 13, 2008 | Canon PowerShot S2 IS Digital Camera
Jan 31, 2008 | Canon PowerShot SD30 Digital Camera
Jun 22, 2018 | Cameras
116 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: