Question about Computers & Internet

1 Answer

How to create network using command prompt in window 7

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Try this link http://www.howtogeek.com/168896/10-useful-windows-commands-you-should-know/

Posted on Nov 24, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Dr_Joseph
  • 86 Answers

SOURCE: How to make a boot-cd of XP

this is the info you are looking for

http://www.howtohaven.com/system/createwindowssetupdisk.shtml

Posted on Feb 01, 2009

  • 497 Answers

SOURCE: I have a Dell latitude d505 and it won't load

Hello, from my experience, it sounds to me like you have had some kind of damage from a virus. It is hard to say for sure. But from what you have described, whatever is wrong seems severe enough to perform a SYSTEM RECOVERY. There is a HIDDEN PARTITION on your hard drive that you can access to perform this action. Here's what to do:
1) Make sure your computer is pluged into an outlet and charging before you begin.
2) Press the Power On button, Hold Down the Ctrl key & Press F11. Then, release both keys at the same time.
3) At the Symantec PC Restore Screen, press TAB to highlight RESTORE and then press Enter.
4) When the Warning Message appears stating All Data Will Be Lost, highlight CONFIRM and press ENTER.
5) The process takes about 10 minutes and will bring your system back to its Original Factory Condition.
6) At the end of the process, Click FINISH to restart the system.
7) After you have completed the Restore process, be sure to go to the MANUFACTURE'S Support Website to download/ Install Any/All Current Updates related to your Model.
8) Also, last but not least, go to the Windows Update Website and Update your Operating System Software.
9) Oh! I almost forgot to include your choice of Virus Protection Software.. VERY, VERY IMPORTANT!!!
Well, that about does it.. Please be sure to follow the instructions in the EXACT order I listed them, OK? GREAT LUCK!! Lucky4lynn2 :)

Posted on Apr 08, 2010

crok41
  • 621 Answers

SOURCE: I can not reboot my Dell Studio XPS 1645 running

Sounds like you've tried everything except a complete reinstall. If there is information you need off that computer the hard drive will need to be taken out and plugged into another PC as a second hard drive then all can be copied. Then try a complete reinstall and good luck with that. If any problems doing a reinstall i would look at the ram. Cheers from Scott and plz vote

Posted on Nov 03, 2010

SOURCE: selected turn on and off

Sounds like you have corrupted software installed. Do yu have the recovery CD? Use it or reinstall your windows again, best bet is the recovery CD.

Posted on Apr 17, 2011

jonsnell4
  • 20027 Answers

SOURCE: I have a hp pavilion dv 4 notebook and I can't get

Once you have logged in, the command prompt will be there.

Posted on Jun 02, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forgot my laptop password


You can try the following:

If your S.O. is Windows you can try any Windows Password Recovery Tool

Alternatively you can ty( if Windows):

Step 1: Boot or Reboot your Windows laptop (it is a Windows 7 example ).
Step 2: Hold on F8 to enter Advanced Boot Options before the Windows 7 loading screen appears.
Or Press CTRL to enter Advanced Boot Options when computer power on.
Step 3: Choose Safe Mode with Command Prompt in the coming screen, and press Enter.
There are three options for choice, Safe Mode, Safe Mode with Networking and Safe Mode with Command Prompt. In order to reset Windows user password with command prompt, select Safe Mode with Command Prompt.
Step 4: Wait for Windows 7 to load files until Windows login screen comes out.
Step 5: Log in with an administrator account or built-in administrator when you see login screen.
Step 6: Command Prompt runs automatically. Type net user in the Command Prompt and press Enter to see how many user accounts in locked laptop. Then all of laptop users will be listed in the Command Prompt.
Step 7: Choose one administrator to reset forgotten password for laptop.
Type net user fuzi 123 and hit Enter. Suppose 'fuzi' is your locked Windows user name. Then '123' would be new password you reset for it.
Step 8: Login your laptop with the new password after successfully laptop password reset.

Sep 30, 2016 | Computers & Internet

Tip

Steps to create a bootable Vista or Windows 7 USB flash drive for the purpose of...


<b>Steps to create a bootable USB flash drive for the purpose of installing a Vista or Windows 7 OS<br /> <br /> <br /> Microsoft Provides a tool to do this for you - Windows 7 USB/DVD Download Tool which is available for <a href="http://images2.store.microsoft.com/prod/clustera/framework/w7udt/1.0/en-us/Windows7-USB-DVD-tool.exe">download here</a>. If you need instructions on how to use the tool, see the Microsoft Store Help on the ISO-Tool (<a href="http://store.microsoft.com/Help/ISO-Tool">http://store.microsoft.com/Help/ISO-Tool</a>).<br /> <br /> or <br /> <br /> <br /> <span style="text-decoration: underline;">Please follow the steps below</span><br /> <br /> </b> <b>Required:</b><br /> <ul> <li>USB Flash Drive (4GB+)</li> <li>Microsoft OS Disk (Vista / Windows 7)</li> <li>A computer running Vista / Windows 7</li></ul> <b>Step 1: Format the Drive<br /> </b>The steps here are to use the command line to format the disk properly using the <i>diskpart</i> utility. [Be warned: this will erase everything on your drive. Be careful.]<br /> <ol> <li>Plug in your USB Flash Drive</li> <li>Open a command prompt as administrator (Right click on Start &gt; All Programs &gt; Accessories &gt; Command Prompt and select "Run as administrator"</li> <li>Find the drive number of your USB Drive by typing the following into the Command Prompt window:<br /> <span>diskpart<br /> list disk</span><br /> The number of your USB drive will listed. You'll need this for the next step. I'll assume that the USB flash drive is disk 1.</li> <li>Format the drive by typing the next instructions into the same window. Replace the number "1" with the number of your disk below.<br /> <span>select disk 1<br /> clean<br /> create partition primary<br /> select partition 1<br /> active<br /> format fs=NTFS<br /> assign<br /> exit<br /> </span><span>When that is done you'll have a formatted USB flash drive ready to be made bootable.</span></li></ol> <b>Step 2: Make the Drive Bootable <br /> </b>Next we'll use the <i>bootsect</i> utility that comes on the Vista or Windows 7 disk to make the flash drive bootable. In the same command window that you were using in Step 1:<br /> <ol> <li>Insert your Windows Vista / 7 DVD into your drive.</li> <li>Change directory to the DVD's boot directory where <i>bootsect</i> lives:<br /> <span>d:<br /> cd d:\boot</span></li> <li>Use <i>bootsect</i> to set the USB as a bootable NTFS drive prepared for a Vista/7 image. I'm assuming that your USB flash drive has been labeled disk G:\ by the computer:<br /> <span>bootsect /nt60 g:</span></li> <li>You can now close the command prompt window, we're done here.</li></ol> <b>Step 3: Copy the installation DVD to the USB drive<br /> </b>The easiest way is to use Windows explorer to copy all of the files on your DVD on to the formatted flash drive. After you've copied all of the files the disk you are ready to go.<br /> <b>Step 4: Set your BIOS to boot from USB<br /> </b>This is where you're on your own since every computer is different. Most BIOS's allow you to hit a key at boot and select a boot option.<br /> <br />

on May 19, 2011 | Computers & Internet

Tip

How to create a bootable USB using Vista or Windows 7


Having a bootable USB is very essential, especially if you are a Netbook user. Using bootable USB to install an operating system (OS) not only makes the installation faster, but also saves a DVD.Creating or using an USB drive to install Windows operating systems is very easy if you follow the below mentioned steps.

Here we assume that you are using either Vista or Windows 7 to create a bootable USB.

1. Insert your USB (4GB+ preferable) stick to the system and backup all the data from the USB as we are going to format the USB to make it as bootable.

2. Open elevated Command Prompt. To do this, type in CMD in Start menu search field and hit Ctrl + Shift + Enter. Alternatively, navigate to Start > All programs >Accessories > right click on Command Prompt and select run as administrator.
3. When the Command Prompt opens, enter the following command:DISKPART and hit enter.LIST DISK and hit enter.Once you enter the LIST DISK command, it will show the disk number of your USB drive.
4. In this step you need to enter all the below commands one by one and hit enter. As these commands are self explanatory, you can easily guess what these commands do.
SELECT DISK 1 (Replace DISK 1 with your disk number), CLEAN, CREATE PARTITION PRIMARY,SELECT PARTITION 1ACTIVE,FORMAT FS=NTFS(Format process may take few seconds),ASSIGN,EXIT.
Don't close the command prompt as we need to execute one more command at the next step. Just minimize it.

5. Insert your Windows DVD in the optical drive and note down the drive letter of the optical drive and USB media. Here I use "D" as my optical (DVD) drive letter and "H" as my USB drive letter.

6. Go back to command prompt and execute the following commands:

D:CD BOOT and hit enter. Where "D" is your DVD drive letter.CD BOOT and hit enter to see the below message.BOOTSECT.EXE/NT60 H:(Where "H" is your USB drive letter)

7. Copy Windows DVD contents to USB.You are done with your bootable USB. You can now use this bootable USB as bootable DVD on any computer that comes with USB boot feature (most of the current motherboards support this feature).Note that this bootable USB guide will not work if you are trying to make a bootable USB on XP computer.

on Dec 18, 2010 | Computers & Internet

1 Answer

Bought a Fugitsu T4020D with a broken screen at a yard sale. Fixed the screen but it is password locked at BIOS, and before Windows loads. How can I unlock the BIOS to get into this thing?


1. Bypass Windows 7 Logon Password with Command Prompt While computer couldn't boot normally or notebook is infected with Trojans or malware, you can get rid of them by starting computer in Windows Safe Mode. Furthermore, when lost or forgot Windows password, you can also bypass Windows 7 logon password easily in Safe Mode.
In Windows 7, there are 3 different types of safe modes to choose, Safe Mode, Safe Mode with Networking and Safe Mode with Command Prompt. And the following guide is about how to bypass Windows login password with Command Prompt in Safe Mode. With net user command in Windows safe mode, you can reset Windows password effectively. Details as follows:
Step 1: Start or restart your Windows 7 computer.
Step 2: Press F8 to enter Advanced Boot Options before the Windows 7 loading screen appears.
Step 3: Choose Safe Mode with Command Prompt in the coming screen, and then press Enter.
Step 4: Wait for Windows 7 files loading until Windows login screen comes up.
Step 5: Log in Windows with an administrator account until you see login screen.
Step 6: A Command Prompt appears. Type net user in the Command Prompt and then hit Enter. All Windows user accounts will be listed for you.
Step 7: Type net user iSunshare 12345 and hit Enter.
Note: "iSunshare" is your locked Windows user account name. And "12345" means the new password you want to reset for the locked account. User account "iSunshare" will be reset with new password "12345".
Step 8: The new password has been successfully reset for user when the command is completed successfully.
Step 9: Login Windows 7 PC with the new password.
Whenever you need to access Windows in Safe Mode, an administrator account password is necessary. So it is highly recommended that write down Windows password and store it or creating a Windows password recovery disk before Windows password lost.

May 11, 2016 | Computers & Internet

1 Answer

Crossfire wont back up from Windows 7


1.

Connect the external hard disk drive to the computer. Make sure that the external hard disk drive is powered on.


2. Create a Windows 7 system repair disc. To do this, follow these steps:


Click Start Collapse this imageExpand this im, type create a system repair disc in the Start Search box, and then click Create a System Repair Disc in the Programs list.



Follow the instructions to create the disc.


3. Note You must have a CD or DVD burner to create a system repair disc.


4. Start an elevated command prompt. To do this, follow these steps:


Click Start Collapse this imageExpand th, type command prompt in the Start Search box, right-click command Prompt in the Programs list, and then click Run as administrator.


5. At the command prompt, type the following command, and then press ENTER:

C:\Windows\System32\REAgentC.exe /disable


6. Disconnect the external hard disk drive.


7. At the elevated command prompt, type the following command, and then press ENTER:

C:\Windows\System32\REAgentC.exe /enable

Note This operation might fail. In this case, if you have to have access to recovery tools, use the Windows 7 system repair disc that you created in step 2.


8. Reconnect the external hard disk drive to the computer.


9. Start the Backup and Restore Wizard to back up your files and data to the external hard disk drive.


Hope this helps


Sep 26, 2012 | SmartDisk Crossfire Desktop (xf160f) 160...

Tip

How to enable Windows 7 administrator account and reset lost Win 7 admin...


How to enable Windows 7 administrator account and reset lost Win 7 admin password
There are two parts for your Windows 7:
* Enable Windows 7 administrator account
* Reset lost Win 7 admin password
With 240 million licenses sold out in one year, Windows 7 has been proved to be a successful product of Microsoft. Compared with its previous versions like Windows XP, it has many improved features. The built-in administrator account is one of the features. In Windows XP, there is a default administrator account after installation. But the built-in administrator account is disabled by default in Windows 7. To enable Windows 7 administrator account and assign a password to it, you can achieve it in 2 methods.
Part I: Enable Windows 7 administrator account
Method 1: Use Command Prompt
The easiest way to enable the Windows 7 built-in administrator account is to use the Command Prompt.
1. Click Start and type CMD in the search box. Right-click CMD and select Run as Administrator.
2. Click Yes when prompted to allow the Command Processor to run. And then the command prompt will appear.
3. Type net user in the command prompt window, and then hit Enter. All the Windows account user names will be listed. You'll also see the Administrator account, but now it is not enabled.
4. Type net user administrator /active:yes and hit Enter to enable Windows 7 admin account.
Now the Windows 7 administrator account is created. To create the Windows 7 administrator password, you can follow the below steps:
1. Switch to log on Windows 7 with the administrator account.
2. Click Start, Control Panel, User Accounts and Family Safety and User Accounts in order. You'll enter the screen where you can make changes for your account.
3. Click Create a password for your account on the screen.
4. In the coming screen, type and confirm your Win 7 admin password.
5. Enter password hint and click Create Password.
Now your Windows 7 admin password is successfully created.
Method 2: Use Local Users and Groups
1. Click Start and type lusrmgr.msc in the search box, and then hit Enter. The Local Users and Groups screen will come up.
2. Double-click the Users folder. And all the Windows 7 account will be displayed for you.
3. Right-click the Administrator account and select Properties.
4. Uncheck the "Account is disabled" check-box and click OK on the administrator properties screen.
Now Win 7 admin account is enabled. To set a password for the enabled Windows 7 administrator account, follow the steps as below:
1. Right-click the Administrator account and select Set Password.
2. Click Proceed to go on your operation
3. Type and confirm your new Win 7 admin password and click Ok
4. Close the Local Users and Groups screen.
Now the Windows 7 administrator password is assigned to your Windows 7 admin account.
Part II: Reset lost Win 7 admin password
Windows 7 administrator password reset Tips:
Note 1. Please remember to create a Windows 7 password reset disk after assigning Windows administrator password. It allows you to change your forgotten Win 7 admin password when you are locked out of Windows.
Note 2. If you forgot to create the password reset disk, you can choose to use Windows Password Breaker to help create a Windows 7 password reset disk rather than reinstalling the system. Now follow the steps to create the disk to reset Windows 7 password.
step 1. Download and install Windows Password Breaker.
step 2. Run the program and burn a Windows password reset disk.
Step 3. Reset Windows 7 administrator password with the disk.
It is an easy and safe way for Windows 7 admin password reset.

on Nov 02, 2010 | Computers & Internet

Tip

How to Install Windows 7 from a USB Key


Note: This guidewill only work within Windows Vista or 7. 1. Format Your USB Key
Plug in your USB key and back upany existing data stored on it. You'll need to format the key before you canmake it a bootable device. Open up a Command Prompt as anAdministrator. You can do this by finding the cmd.exe in yoruWindows/System32 folder, right-clicking the executable, and selecting "Run asAdministrator". Alternatively, type CMD in the Start Menu search field andactivate the Command Prompt using Ctrl + Shift + Enter. You should be underc:\Windows\system32 (assuming your Windows partition is the C drive). Type"diskpart" in the command line to enter the Disk Partition command line tool,which lets you format and create partitions on active disks. Type "list disk" to reveal a listof all your active disks, each of which is associated with a number. Make anote of which one is your USB key, based on the capacity. In our screenshotbelow, our USB drive is Disk 6 (8GB). Next, type the following commands,one at a time: Select Disk # (Where# is the number of your USB disk. We typed "Select Disk 6") Clean (removes anyexisting partitions from the USB disk, including any hidden sectors) Create Partition Primary(Creates a new primary partition with default parameters) Select Partition 1(Focus on the newly created partition) Active (Sets thein-focus partition to active, informing the disk firmware that this is a validsystem partition) Format FS=NTFS(Formats the partition with the NTFS file system. This may take several minutesto complete, depending on the of your USB key.) Assign (Gives theUSB drive a Windows volume and next available drive letter, which you shouldwrite down. In our case, drive "L" was assigned.) Exit (Quits theDiskPart tool)2. Turn the USB Key into a Bootable Device
Insert the Windows 7 install DVDinto your drive, and view the files that it contains. Copy all of the fileshere to a folder on your Desktop. We put the disc contents in a folder named"Windows 7" Go back to your command prompt,running it as an Administrator. Using the "CD" command, find your way to thefolder where you extracted the ISO files. Your command line path should looksomething like "C:\Users\USERNAMEHERE\Desktop\Windows 7\". Type the following commands: CD Boot (This getsyou into the "boot" directory) Bootsect.exe /nt60 L:(where 'L' is the drive letter assigned to your USB key from the previous step) Bootsect infuses boot managercompatible code into your USB key to make it a bootable device. IMPORTANT: Ifyou're currently running 32-bit Windows Vista or 7, Bootsect will only work ifyou use the files from the 32-bit Windows 7 install disc. The Bootsectexecutable from the 64-bit version will not run in 32-bit Vista. 3. Load the USB Key Up with the Install Files
Copyall of the extracted ISO files into the USB drive. You don't need to do thisfrom the command prompt. Just drag and drop the files from the "Windows 7"folder into the drive using Windows Explorer. Your USB key is now all ready togo! Plug it into your target system and make sure you enter the BIOS (typicallywith F2 or F12) to temporarily change the boot order to allow booting from theUSB key before your primary hard drive or optical drive. On the next restart,your system should automatically begin speedily loading setup files off of theUSB key and entering Windows 7 installation.

on Oct 28, 2010 | Computers & Internet

1 Answer

Hi ,I have HP Pav DV6 with windows 7.But I want to install windows server 2003 & its not allowing me.I want to make it dual boot,Plzz help.I need to do it urgently...


Hi,
Please understand that Windows 7 uses different startup files and procedures so it is expected that the original Windows Windows 7 system cannot be booted if you install a new dual boot Windows Server 2003 system. If you would like to install Windows Server 2003 on another partition, please do that first. After that, Windows Server 2003 will boot but WIndows 7 not. However, we can try the following method to make Windows Vista work again: Insert the Windows 7 disk into DVD-ROM. Click Start, click Accessories, right-click the command-prompt shortcut, and then click Run as Administrator. Type the following command at a command prompt and press Enter: Drive:\boot\Bootsect.exe /NT60 All In this command, Drive is the drive where the Windows 7 installation media is located. Note The boot folder for this step is on the DVD drive. 4. type the following commands at a command prompt and press Enter. Note In the commands below, Drive is the drive where Windows 7 is installed. Drive:\Windows\system32\Bcdedit /create {ntldr} /d "Windows Server 2003" Drive:\Windows\system32\Bcdedit /set {ntldr} device partition=x: (Note: x: is the drive letter for the active partition. For example, if 2003 is installed on C drive, device partition=c: ) Drive:\Windows\system32\Bcdedit /set {ntldr} path \ntldr Drive:\Windows\system32\Bcdedit /displayorder {ntldr} /addlast
5. Restart the computer.

Jun 08, 2011 | Computers & Internet

Tip

How to Bypass Windows Password With Ease?


Nowadays, it comes a common sense to add a BIOS or Windows password for laptop protected. Thus, a feasible advice is to create a Windows password disk in case that you forgot Windows password. But without Windows password reset disk, what should we do in order to bypass Windows password?

It's time to learn how to bypass Windows password with the following two tips and tricks.

Method 1: Bypass Windows password by Safe Mode with Command Prompt

According to Wiki, Safe Mode is a diagnostic mode of a computer Operating System (OS), a special way for Windows to load when a system-critical problem interfering with normal operation of Windows. If you are not able to boot your computer in normal mode or supposed your notebook is infected with Trojans or malware, you are able to get rid of them with Safe Mode. Furthermore, it is easier and safer to bypass Windows password in Safe Mode when you lost or forgot Windows password.

Take Windows 7 for example: there are 3 different types of safe mode: Safe Mode, Safe Mode with Networking, and Safe Mode with Command Prompt. Below is a guide on how to bypass Windows 7 password with Safe Mode with Command Prompt, which allows you to bypass Windows password with command line. Detailed steps are as follow:

Step 1. Boot or reboot your Windows 7 computer.
Step 2. Press F8 to enter Advanced Boot Options before the Windows 7 loading screen appears.
Step 3. Choose Safe Mode with Command Prompt in the coming screen, then Press Enter.
Step 4. Wait for Windows 7 files to load until Windows login screen comes up.
Step 5. Log in with an administrator account when you see logon screen.
Step 6. A Command Prompt appears.Type net user in the Command Prompt and then hit Enter. All Windows user account names will be listed for you.
Step 7. Type net user 'Alina 123' and hit Enter.
Step 8. The new password has been successfully reset when the command is completed successfully.
Step 9. Log on your PC with the new password.

Note: 'Alina' is your locked Windows user account name. And '123' means the new password you want to reset for the locked account.
Whenever you need to log on to Safe Mode, an administrator account password is necessary. So it is highly recommended you to write Windows password down and sotre it or creating a Windows password recovery disk before lost/forgot Windows password.

Method 2: Bypass Windows password with Windows Password Unlocker
8927126.jpg

However, if you haven't created a password reset disk and forgot all administrator account password, it's better for you to bypass Windows 7 password with Windows password reset software. These reset software allow you to bypass Windows passwordwith a USB flash drive or bootable CD/DVD. Windows Password Unlocker Professional is one of the best choice to reset or change Windows password in a while.

Go through with these steps and recover Windows password with ease!
Step 1. Download Windows Password Unlocker Professional and install it in any computer.
Step 2. Run the program and burn an ISO image file into a blank CD/DVD or USB flash drive.
Step 3. Start your locked computer from the bootable CD/DVD or USB flash drive.
Step 4. bypass Windows password successfully.
Of course, there are some other methods of bypassing Windows 7 password. Picking up a suitable and efficient one to bypass Windows password is a necessity.

on Oct 28, 2010 | Computers & Internet

Tip

INSTALL WINDOWS 7 USING USB PEN DRIVE !!!!!!!!


Requirements:
*USB Flash Drive (Minimum 4GB)
*Windows 7 or Vista installation files.
Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Where “H” is your USB drive letter. Once you enter the above command you will see the below message.
8. Copy your Windows 7/Vista DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.
Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

on Apr 02, 2010 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...