Question about Televison & Video

1 Answer

I'm getting a blue screen that says please run channel auto scan and after I do that it says it again

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,619 Answers

Main system control memory IC fault. Replace it. Contact any service technician. Before doing anything, try a reset to this TV and check. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Posted on Nov 24, 2014

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bschilz
  • 2049 Answers

SOURCE: I am looking for the owners manual for a dynex 32

Here's a link to the manual...
http://www.dynexproducts.com/skins/skin_1/Topics/Documents/07-062_DX-R32TV_WEB.pdf

Posted on Sep 04, 2009

  • 718 Answers

SOURCE: Hi there. I'm getting a

I am assuming this is your first digital television. Unlike the old analog television digital televisions
must have the channels scanned into the set. This what you have to do.
> Connect the signal source to the back. Antenna/Cable/Satellite.
(You may have already done the above step.)
> Go into the menu for the signal input source and set it to what was set on the back of the set.
> Click on scan or channel or whatever it's called and wait for it to search for available channels.
> Save the channels found.
You may exit menu and watch television.

The owner's manual gives this and more information.

Posted on Feb 16, 2011

  • 1 Answer

SOURCE: How do you get the "run channel auto scan " off

enter the channels manually. had the same problem with Insignia junk.

Posted on Jul 15, 2011

  • 15 Answers

SOURCE: it ask to please run channel auto scan

just press the key that displays on the screen when it ask run channel auto scan or go to menu and channels find auto scan then press enter

Posted on Aug 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset channel auto scan.After I finish channel scan,message pops up stating PLEASE RUN CHANNEL AUTO SCAN,


If when You scan, and you don't get at least one channel, it will keep showing You this message! look at screen it will show new channels! if no new channels check to make sure your coax is hooked up good, also make sure you are using right setting if outside antenna, select antenna, if cable select cable for your source!

Nov 03, 2016 | Televison & Video

2 Answers

Auto scan not working??


Make, model, and year please.

Jan 22, 2016 | Televison & Video

1 Answer

How do I run a channel auto scan on a Coby TV?


It will be in the setup menu. I believe with the Coby there is an initial setup screen which will guide you through.

Jan 18, 2015 | Coby Televison & Video

1 Answer

How do I run channel auto scan on Calypso TV


try going to settings ,menu then hit present or auto scan

Oct 26, 2014 | Calypso 26"" LCD Hd TV

1 Answer

Display says please run auto channel scan


It sounds like it is not seeing any signal. Do you have the input set for the proper type? Air or Cable

Check your RF connection to ensure you have a signal coming into your television.

Nov 16, 2013 | AOC L22W898 22 in. LCD TV

1 Answer

Can't get rid of "Please Run Channel Auto Scan" stays on tv screen


for some reason it is not seeing you cable signal. you will need to make sure you have it set up for cable and not air. check your input options, like tv/av/hdmi/ ect hope this helps

Aug 05, 2012 | Dynex DX-LCD32-09 LCD TV

1 Answer

27F520T RCA Truflat, won't scan for channels, auto or manual, only blue screen, no channels on tv


You need to replace the microprocessor. GoodLuck there is 52 pins to unsolder and resolder a new one. The price for the chip may bee about $35

May 13, 2009 | RCA TruFlat 27F520T 27" TV

3 Answers

Channel/clock auto set


Press both eject buton and rewind button

Jan 22, 2008 | Panasonic PV-C2061 20 in. TV/VCR Combo

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Cindy Wells

Level 3 Expert

5054 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...