Question about Health & Beauty

1 Answer

Why on my CC4 scooter does it intermittently fail to start (forwards or reverse)? The green status light flashes 6 or 7 times and all the other electrics work fine and the batteries show fully charged

I have tried checking all plug connectors for tightness, battery connections, (All other electrics work fine).Status light flashes 6 or 7 times (not sure which) and also the brake coils don't energise. With the exception of this intermittent problem (Approx. once a day whether scooter warm or cold)everything is fine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Health & Beauty Master
  • 20,086 Answers

Gear lever sensor is not working correctly. Check the electronic brake.

Posted on Nov 23, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

FixinFax
  • 3085 Answers

SOURCE: Forward/Reverse switch not working Revo Pride

Could it be in free-wheel mode. Most Prides have a pull up knob at the rear of the scooter.

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Pride Sundancer that will usually go forward but not reverse. Green light flashed 3 then 5 blinks. What is the problem


Hi charge batteries & get them load tested ..U can buy a BATTERY LOAD TESTER of E/BAY cost aprox $36 this will give U an accurate reading on there condition,.3 flashe's unplug charger & turn key of & back on ..5 flashe's remove key push freewheel lever into freewheel & back into drive put key back & try it . Cheers

a53b2452-fa4b-4705-9014-5a4792baedbe.jpg

Nov 30, 2016 | Pride Health & Beauty

1 Answer

Put in new batteries status light blinks no forward or reverse


The blinking is a flash code, maybe you should check the free wheel lever is in the drive position."hard to manually push"
Scooter Doctor App

May 31, 2014 | Pride Value Line Revo Scooter 3 Wheel

1 Answer

Pride hurricane. Will not move fwd or rev. No beeps when turn on switch


So the status light does not flash ? just a steady green ?,,,

so when moving the throttle lever or wig wag what ever you wish to call it , is there a click from the rear brake located on the side of the motor ???

Regards
Rob

www.gewizrepairs.co.uk

Feb 02, 2014 | Hurricane Pride PMV Mobility Scooter -...

1 Answer

Work all days yesterday, this morning went out to van, got to work and it would not move, lights come on flash but will not move


The code 6 failure code is the toggle throttle [engager] isn't in the neutral position when power is applied to the scooter. If the engager doesn't return to the neutral position as soon as you turn the key on the scooter would start to move, that woul

Engager
1. Check connections on red, white and black wires at crimps and soldered joints. (Flash Code
7)
2. Use meter to check for:
- White & Red: 5k1 + 10%
- Red & Black: 2.5k1 (approx.)
- White & Black: 2.5k1 (approx.)
3. With meter between Red & Black, squeeze engager forward. Resistance should go from 2.5k
down to 01 smoothly.
4. With meter between White & Black, squeeze engager reverse. Resistance should go from
2.5k down to 0 1 smoothly.
5. Check voltages (with key on):
- Forward - Red- 4.5V + .1V
- Neutral - Black- 2.5V + 0.1V
- Reverse - White - .5V +.1V
If using a Test Harness - White & Red: 5k, Forward - Red & Brown: 2-5k, Reverse - White &
Brown: 2-5k.
1. Use Red & Brown squeeze engager slowly forward 25 down to 0 slowly.
2. Use White & Brown squeeze engager slowly reverse 25 down to 0 slowly. Make sure dial
speed is set to10.

Jul 25, 2012 | Pride Jazzy Select Gt Scooter

1 Answer

I disabled the brake on the scooter. When I enabled the brake and turned on the power, the green light flashes and cannot move forward or reverse. There is plenty of power showing on the gauge.


I need to know how many flashes you are getting of the green light. i.e. 4 flashes pause 4 flashes
Also check the freewhell lever again to make sure it is in the drive position Hope this helps

May 05, 2011 | Electric Strider Mini 4 Wheel Mobility...

1 Answer

My Lynx L4 4-Wheel scooter green light flashing but it said it is charge it wont go forward


the green flashing light indicates an error with the scooter. Count the number of flashes 4 flashes pause 4 flashes pause etc and your manual should give you the meaning of the flashes Check to make sure that you are not in freewheel move the lever at the back of the scooter up and down a few times and make sure you leave it in drive mode turn on the power and see if the light stops flashing and the scooter will operate correctly Hope this helps

Oct 03, 2010 | Activeforever Lynx L4 Portable Mobility 4...

1 Answer

We have an scooter an this scooter have an electronic's device's have self diagnostic an this scooter dont work an 7 times the green led is flashing an stop an repet again the cicle. we want know what...


If the batteries are charged and the brake is in the drive possition, it is possible that either there is a problem with the Wig Wag (forward/reverse paddle control) or the speed pot. Some ideas for you to look at.

Nov 10, 2009 | Golden Technologies Companion II Travel...

1 Answer

Forward/Reverse switch not working Revo Pride


Could it be in free-wheel mode. Most Prides have a pull up knob at the rear of the scooter.

Jun 03, 2009 | Pride Value Line Revo Scooter 3 Wheel

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...