Question about Canon Cameras
Because a circuit board has gone bad in the lens and now can't get the information it needs to the body.
Posted on Nov 25, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Quantaray lenses
I bet they are not AF lenses. There are adapters that add the AF contacts to "fool" the camera but increase the zoom. You can get used lenses from many "on line" camera stores with warranties for a few months.
Posted on Jul 27, 2009
Most likely something bad has happened. It out of warranty, usually its 5 years. This is a pro job, getting to anything inside a lens is a very special job. There are a number of places to send it out. Check http://www.acecam.com/srindex.html and write to one or two of the places for estimates. It could be $150 or more plus shipping and taxes. A new one is about $400+, you could check around the many on-line camera stores for a used one. Could be a simple electronic part or the iris blades are bad.
Posted on Jul 27, 2009
I hate to re-invent the wheel (and I don't want to cut 'n paste someone else's hard work to present as my own) so please click here for a likely practical solution which usually works and for Canon's own suggestions on the error 99 fault.
If this has assisted you then please rate my answer; if not then add a comment to provide feedback and I'll attempt to provide an alternative solution.
Posted on Mar 02, 2010
SOURCE: my 60d finding ERR 01
I have the exact same problem, it's the aperture flex cable which have a design flaw. At 12mm the flex is stretched at maximum and over the years loses its flexibility and breaks. Mine works fine from 24 to 15mm. Below 15 the camera always reports err01. All flex cables in the tokina are welded -IMHO you need to take it to a professional.
Posted on Sep 14, 2012
Tips for a great answer:
Jun 20, 2011 | Tokina 12-24mm /f4.0 for Canon
Apr 17, 2011 | Tamron AF 28-200mm f/3.8-5.6 LD Aspherical...
Mar 14, 2011 | Canon EF-S 17-55 f/2.8 IS USM Lens
Jun 09, 2010 | Canon EF-S 17-85MM F/4-5.6 IS USM Lens
Mar 01, 2010 | Canon EF-S 17-85MM F/4-5.6 IS USM Lens
Jan 02, 2010 | Canon EOS 40D Digital Camera
Jul 19, 2009 | Canon 24-105mm f/4L IS USM EF Lens
Jun 29, 2009 | Tokina 12-24mm /f4.0 for Canon
Mar 05, 2007 | Canon EF-S 17-85MM F/4-5.6 IS USM Lens
Aug 29, 2017 | Canon Cameras
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: