I too lost my White embroidery machine 4400 CD-Rom install disk..Could someone help me? I noticed a free download for burning it but the link is broken and I cant access it. I cant use my machine with

http://www.ebay.com/itm/White-Home-Embroidery-Machine-4400-Software-CD-WM4-/161367243556?pt=LH_DefaultDomain_0&hash=item25923cbb24


run and buy this now.......this one is a hard one to find...good luck

I would suggest to contact singer, or a singer dealer & ask them

Take off your throat plate and make sure that there is not a piece of your needle still in there, brush it out and oil your machine if it needs it. Now rethread.

Unfortunately, it seems that the company that bought the White brand (SVP) has no interest in creating new drivers for the machine. Is your computer running the 32-bit or the 64-bit version of Windows 7? (Start > Control Panel > System and Security > System. If you see x64, you have the 64-bit version.)

If you have the 32-bit version, you can try the compatibility mode. With the White USB drive connected to the computer, right click on the installer instead of normally running the installer. Then choose Properties and then the Compatibility tab. Turn on Run program as Compatible with the appropriate OS. Then right click again on the installer and choose Run as Administrator. Then check if the program itself is running in the compatibility mode by right clicking again and choosing Properties.

A method that will work is to use a computer (virtual, dual-boot, or true second machine) with an older version of Windows installed. If you have Win7 Pro or Ultimate, you can create a virtual XP computer for free. Download and install Virtual PC and XP mode from Microsoft. Install them in order. Then install the XP software that came with the sewing machine in the virtual computer and it will work. (Other virtual computer programs are Parallels and VMWare.) All of the other options will require a licensed version of the older Windows OS.

I hope this helps.

Cindy Wells

Question ? Is your Computer Xp or a newer Computer ? I heard that it will not run on new Computers but check with this website they have a phonenr. also on site, they may be able to help http--www.allbrands.com-products-abp09693.html good luck Ps do you have your machine turned on when installing CD?

Is it in your manual? If, so all of the manuals for your machine are available for free at www.singerco.com. You can download them and save them to your computer, also nice for enlarging diagrams. If, you need tech help call Singer at 1-800-4singer.

Local computer stores carry Universl power adapters. These spec are very common on off the shelf power adapters.

You power supply specs are:
DC 6V power UL Power supply at 800mA

Or you can order from this site:

http://www.whitesewingcenter.com/index.php

http://www.whitesewingcenter.com/orderform.php

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

www.sewingmanuals.net

Click on your White Program Icon on your Computer. At file ask it to load a file, make sure it searches the directory where your embroidery files are located, just click on each image and once it's loaded send it to the machine by clicking on the USB Icon in your tools bar. This will load the image into Navigator, you will have to repeat the steps for each image.

Did you accidently clear it in the Navigator screen? If so you just erased the pre-installed patterns. These can be re-installed by using the CD that came with your machine. They are all on the disk, you may have to load each pattern individually but they are on the disk.