Where can i find a the Chinese 13.3'' Hannspree tablet screen?

Google helps. Google it

http://www.hannspree.eu/en/troubleshooting/hannspad-ts-10-1

This could be a couple of things:
- Try unplugging it from power source,
- try to reboot by holding powerbutton for more then 20 seconds

Please let me know if this worked out!

Hi,

Please reset your tablet to factory default mode. To do this please follow the steps provided below.



I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482

Hi,

Please check the link provided below to request for the price of the LCD.

HANNspree LCD Screens

I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482

See a part of the specs, down here.
Be aware the 32 Gbyte can't be used as internal memory. It only can be used like an external hard disk. You can exchange the SDHC card and save data you don't need to access while running the tablet.
So when the tablet says memory is full, you should transfer data like images and videos to the external card and then delete the data from the internal memory.

Try rebooting the device. To do so PRESS & HOLD, POWER & EITHER VOLUME BUTTON. TRY BOTH!

Try Googling for the answer???

This is the english version. Http://www.hannspree.com/HSPV3images/Downloads/TabletPC/UserManual/SN10T1/HANNSpad(SN10T1)_UM_EN_v1.0.pdf

Get rid of this model!!!! The Hannspree and Toshiba models used a TFT LCD screen from a chinese manufacturer that has put out faulty components for the last 3 years. The Problem is in the way the Active Matrix Screen was manufactured. I would recommend you return this item immediately to the place where you purchased it and pick a different brand; also stay away from Westinghouse!