Question about Office Equipment & Supplies

Ad

Hi,

A 6ya expert can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

Good luck!

Posted on Jan 02, 2017

Ad

By default the calculator is set to display two digits after the decimal point (for dollars and cents). If you'd rather have no digits after the decimal point, press 2nd [FORMAT] 0 .

Alternatively, you can press 2nd [FORMAT] 9 for floating decimal.

Alternatively, you can press 2nd [FORMAT] 9 for floating decimal.

Sep 17, 2012 | Texas Instruments BA-II Plus Pro...

The selector you are asking about is the "decimal selector". The result displayed/printed, will be in a format according to the position that you have selected as follows:

f = floating (the result will be in the number of decimal places that were entered on the keyboard

4= fixed 4 decimal places (x.0000)

3= fixed 3 decimal places (x.000)

2= fixed 2 decimal places (x.00)

0= fixed 0 decimal places (x)

add 2= (add mode*,fixed 2 places) ($.00)

Note* "ad mode" automatically enters the decimal place when entering the number on the keyboard. If you enter "123", the displayed ammount will be "1.23". If you enter "1", the display will read ".01". This is a useful setting when adding a list of numbers in a dollars/cents format, however, be careful, if entering a whole dollar ammount "three dollars" be sure to enter the decimal point, or enter the number as "300". If you don't, the result will be ".03", instead of the 3 dollars you intended.

f = floating (the result will be in the number of decimal places that were entered on the keyboard

4= fixed 4 decimal places (x.0000)

3= fixed 3 decimal places (x.000)

2= fixed 2 decimal places (x.00)

0= fixed 0 decimal places (x)

add 2= (add mode*,fixed 2 places) ($.00)

Note* "ad mode" automatically enters the decimal place when entering the number on the keyboard. If you enter "123", the displayed ammount will be "1.23". If you enter "1", the display will read ".01". This is a useful setting when adding a list of numbers in a dollars/cents format, however, be careful, if entering a whole dollar ammount "three dollars" be sure to enter the decimal point, or enter the number as "300". If you don't, the result will be ".03", instead of the 3 dollars you intended.

May 20, 2011 | Royal 29307U Calculator

Press 2nd [FORMAT], type the number of digits you want after the decimal point or 9 for floating-decimal, then press ENTER 2nd [QUIT].

Mar 03, 2011 | Texas Instruments BA II PLUS Financial...

This could be a result of a rounding error. Make sure that the calculator is set to at least 5 decimal places.

In order to do this, press [2nd][Format].

Type in the number of decimals to be displayed (0-9) and push [Enter].

To specify a floating point decimal, enter '9'.

In order to do this, press [2nd][Format].

Type in the number of decimals to be displayed (0-9) and push [Enter].

To specify a floating point decimal, enter '9'.

Dec 16, 2010 | Texas Instruments BA-II Plus Calculator

By default the BA-II Plus displays two digits to the right of the decimal point, for dollars and cents. To change the number of digits, press 2nd [FORMAT] and a digit from 0-8. Use 9 for floating decimal display.

Jul 08, 2010 | Texas Instruments BA-II Plus Calculator

Press 2nd [FORMAT]. Press 0-8 for the number of digits after the decimal point, or 9 for floating-decimal, followed by ENTER. Press 2nd [QUIT] to exit.

May 19, 2010 | Texas Instruments BA-II Plus Calculator

Hello

Press the [MODE] key until you reach the display format setup screen, with FIX, SCI and NORM. Under them you have, repectively, 1 2 and 3.

Press the number under the display format you want. If you are presented with 0 tilda 9, you are expected to enter a number between 0 and 9. The number you enter will decide how many decimal digits your results will have.

Hope it helps.

Press the [MODE] key until you reach the display format setup screen, with FIX, SCI and NORM. Under them you have, repectively, 1 2 and 3.

Press the number under the display format you want. If you are presented with 0 tilda 9, you are expected to enter a number between 0 and 9. The number you enter will decide how many decimal digits your results will have.

Hope it helps.

Oct 02, 2009 | Casio FX-300MS Calculator

Your BA II PLUS stores numeric values internally to an accuracy of 13 digits. However, the numbers it displays depends on the number of decimal places to which you have it set (choice of 0–9 or floating decimal). To set the number of decimal places displayed to three: hit [2ND][FORMAT][3][ENTER]This setting also continues indefinitely (even though the calculator is turned off and on) until it is changed.

Jun 01, 2009 | Texas Instruments BA-II Plus Calculator

Your BA II PLUS stores numeric values internally to an accuracy of 13 digits. However, the numbers it displays depends on the number of decimal places to which you have it set (choice of 0–9 or floating decimal). To set the number of decimal places displayed to three: hit [2ND][FORMAT][5][ENTER]This setting also continues indefinitely (even though the calculator is turned off and on) until it is changed.

Apr 24, 2009 | Texas Instruments BA-II Plus Calculator

Just follow the steps....

- Type "Enter Land in Gundas" in A1
- Type "Equivalent Land in Acres" A2
- Type "=B1/40"
- Now type the number of gundas in B1 example 100
- you will automatically get 2.5 in B2

- Select B2 Cell
- Right Click and goto Format Cell
- Goto Number
- Under Number select Number Catogory
- and then select 2 decimals

Jan 31, 2008 | Computers & Internet

33 people viewed this question

Usually answered in minutes!

×