Question about Sharp MX-2300N Color Copier
Posted on Nov 22, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Sorry bubbabear 64, you are wrong you need to reset the copier with sim 14, once you have cleared the jam, there is no sensor in the fuser so often if the paper gets crumpled in there is doesnt trigger and sensors so the customer trys to copy again and again, seen it many times.
John Sharp Tech
Posted on Jul 22, 2008
yes open the front door remove the waste toner and you will see the 4 drum units each with a little green stick pointing out
pull this in and out a few times on each unit ...
hope this helps
Posted on Jul 13, 2010
Here's a new solution that works. When adding the printer, choose "Generic PCL Printer". This will allow you to print from your Mac to the Sharp Printer without buying the PostScript chip/kit for the printer.
Posted on Nov 17, 2011
Check registration ( timing of paper start from alligning roller with the scanner unit start ), or there could be a problem with the paper feed system ( Paper getting physically stuck / releasing late )
Posted on Jan 16, 2013
Tips for a great answer:
Mar 02, 2015 | Sharp MX-2300N Color Copier
Jul 11, 2014 | Sharp MX-2300N Color Copier
Aug 02, 2013 | Sharp MX-2300N Color Copier
Aug 25, 2011 | Sharp MX-2300N Color Copier
May 18, 2010 | Sharp MX-2300N Color Copier
Dec 14, 2009 | Sharp MX-2300N Color Copier
107 people viewed this question
Usually answered in minutes!