Question about Cell Phones

1 Answer

My Nokia 2700c is completely dead and I tried to

My Nokia 2700c is completely dead and I tried to flash it with phoenix 2011 version. but all I got is an error message that "failed to set phone to flashmode".. I've tried like 10 times with no luck.. Please help me out.. Here's a screenshot of the error

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cell Phones Master
  • 6,702 Answers

Updating or flashing any electronic device, only should be done, if you are sure the device is working 100%. If not, it is virtually impossible to find out, if an error is hardware or software related. Now it is impossible to test the device, without connecting it to a test device. (Test computer with the appropriate software)
A bricked phone is difficult to revive. Sorry I can't be more of help.

Posted on Nov 22, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 50 Answers

SOURCE: nokia 6300 dead

Your battery is completely dead the best thing to do is by another battery.

Posted on Jul 01, 2009

saranathrana
  • 32 Answers

SOURCE: cannot receive data using nokia 3110c bluetooth

replace the bluetooth ic.

Posted on Aug 20, 2009

SOURCE: Somebody have changed my security code. Now my phone is working properly but i want to lock my Nokia 2700c-2 phone with security code. how to reset this with default code? please help me out with this

If you have changed your security code and forgotten it then you are in a ... Hello, i forgot my security code, my phone is Nokia 2700c, how to unlock it, ... Code to format nokia 2700 c - 2; How To Get My Nokia 2700 Classic Barring Password? mobile-phones.blurtit.com/q6047622.html hope this helps you

Posted on Jan 28, 2012

raingamj
  • 2148 Answers

SOURCE: My Nokia N8 was dead

HiDid you use fully charge battery ? Was the N8 flash file was correct ?There are many types of firmware refer this N8-00 (RM-596) Major014.002 v3 (SEAP)Download greendl.jpg N8-00 (RM-596) Major014.002 v3 (RUSSIA)Download greendl.jpg N8-00 (RM-596) Major014.002 v3 (MEA)Download greendl.jpg N8-00 (RM-596) Major014.002 v3 (NAM)Download greendl.jpg N8-00 (RM-596) Major014.002 v3 (EURO)Download greendl.jpg N8-00 (RM-596) Major014.002 v3 (LTA)Download greendl.jpg N8-00 (RM-596) Major014.002 v3 (CHINA)Download greendl.jpgAll the above listed names are the latest version but different manufacturer.So, try to check it out and repeat the procedure by selecting the right Product Code.Good luck.Thanks for visiting fixya

Posted on Feb 22, 2012

Geekman
  • 32281 Answers

SOURCE: nokia 2700c battery low problem

If the cell phone battery is more than 3 - 4 years old then the battery could be worn out.Rechargeable batteries have a finite number of charge and discharge cycles andwill lose their charge capacity over time, i.e. won't charge to 100% andgradually the charge reduces until the battery won't charge up at all. OR Thebattery shows a 100% charge but when the adapter is disconnected the batterydrops off to zero capacity in a very short time. If the battery drops to anunacceptable charge level then the battery needs to be replaced.

Posted on Mar 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forget my NOKIA 2730c-1 IMEI:353396/04/712474/3 Security code and its key pad is locked I cant unlock it. What Can I do? plz send me a master code.


You should use NaviFirm+ http://www.symbian-toys.com/navifirm.aspx to download software for your phone. And flash it with Phoenix http://www.n8fanclub.com/2011/07/how-to-flash-dead-nokia-n8-with-phoenix.html

Nov 04, 2016 | Nokia Cell Phones

Tip

Nokia Dead Phone White Screen


<span><b>DEAD PHONE FLASHING -- REVIVE YOUR PHONE! (Tutorial)</b></span> <span><b><br /></b></span> <span><b>NOTE: </b><br /> <ul> <li>100% Working on WIN XP.<img src="thumbsup.gif" /></li> <li>Tried it on WIN7, ONLY 2 out of 5 success rate. <img src="dontknow.gif" /></li> <li>You will ONLY need internet for downloading the files. After installing all files, NO NEED FOR ACTIVE INTERNET CONNECTION while doing the flashing.</li></ul><u><b><br />YOU'LL NEED:</b></u> <b><br /><br />1. Compatibe Nokia USB cable.<br /><br />2. Phoenix Software</b><b><br /><br /></b><b>3. LATEST Firmware from Blue Nokia.<br /><br /></b><b>4. Your DEAD NOKIA CELLPHONE.</b><br /><br /><b><u>DEAD PHONE MEANS</u></b><br /> <ul> <li><b>When you turn on your cellphone you only have <u>White Screen</u> but it WILL NOT CONTINUE TO TURN ON. <br /></b></li> <li><b>VIBRATE ONLY but no WHITE SCREEN - this is a different case. You may have hardware problem. You can still try this tutorial since you have nothing to lose. <br /></b></li></ul><br /><u><b>INSTRUCTIONS:<br /><br /></b></u><b>1.</b> Turn off cp -&gt; remove battery -&gt; look where your cp was manufactured -&gt; note the RM version & the 7 digit product code <br /><i>(Ex. Made in China, RM-346, Product code - 0576672)</i></span> <span><b>2.</b><b> <u>D</u></b><b><u>ownload & Install</u> the compatible firmware</b> version for your cp. --&gt; go here </span><a href="http://www.blue-nokia.com/">http://www.blue-nokia.com/</a> <span>-&gt; On Blue Nokia website (upper right screen) <b>choose phonetype</b></span><i>(Ex. select <b>E52</b>)</i> <ul> <li><b>Choose APAC</b> for cellphones made in Asia. <b>If APAC is not available, you can use SEAP/EMEA.</b></li></ul> <ul> <li><b>Choose EMEA/MEA</b> if it was made in Europe, the Middle East and Africa<b>.</b></li></ul><br /><b>3. Download and Install PHOENIX.</b> <b>--&gt; </b><a href="http://www.mediafire.com/?yi3wo0ymx0m#1">http://www.mediafire.com/?yi3wo0ymx0m#1</a> <img src="vhin100889_31.jpg" /><br /> <span><b><u>NOTE:</u></b> <i>If any ERROR APPEARS ON INSTALLATION -&gt; JUST CLICK <u><b>CONTINUE ANYWAY.</b></u></i></span> <span><i><u><b><br /></b></u></i></span> <img src="vhin100889_32.jpg" /><br /> <span><i><u><b>Read and follow my instruction step for flashing dead phones </b></u></i></span> <span><i><u><b><img src="vhin100889_33.jpg" /><br /></b></u></i></span> <span><i><u><b><img src="vhin100889_34.jpg" /><br /></b></u></i></span> <span><i><u><b><img src="vhin100889_35.jpg" /><br /></b></u></i></span> <span><i><u><b><img src="vhin100889_36.jpg" /><br /></b></u></i></span> <span><i><u><b><img src="vhin100889_37.jpg" /><br /></b></u></i></span> <span><i><u><b><img src="vhin100889_38.jpg" /><br /></b></u></i></span> <span><i><u><b><img src="vhin100889_39.jpg" /><br /></b></u></i></span> <span><b>AFTER STEP 12. YOUR PHONE WILL START TO UNDERGO FLASHING. <br /><br /></b>AFTER SUCCESSFULLY FLASHING.<b> <u>IT WILL RESTART ON ITS OWN. </u><br /><br />if not... JUST RESTART IT MANUALLY ---&gt; THAT'S IT!!</b></span>

on Jul 14, 2011 | Cell Phones

Tip

How to Format Nokia Mobile Phones 3110c, 2700c, 5800 and Others




6771d93.jpg

Detailed guide to Format your Nokia phone at home no need to take your mobile to service center.
This is already tested by me on many of the Nokia mobile.
Here is the model number of mobile which are success fully Formatted by this tool
Nokia 3110c, 2700c, 6120c, 3500c, 5800, 7210c etc. so no need to worry about any thing.

Which are the problems can be solved:
  • Music Player problems.(Updating and Music not found).
  • Display blinking problems.
  • Phone Restriction.
  • Slow mobile problems.
  • Software Missing(like Calculator, Currency Converted etc.).
  • Showing Corrupted Software Problem.
  • And many other problems.
Requirements :
  • A PC with atleast 512 MB RAM
  • Original Nokia Data Cable
  • Flashing Software. (We will be using Phoenix). Click Here to Download.
  • Nokia FirmWare
To Download Firmware for your mobile click here
Before Starting we need to uninstall the Nokia PC suite.

Lets Start the steps to Format Nokia mobiles.

Step1: Download and install Phoenix.

Step2: Install the Firmware downloaded from BLUE-NOKIA.
If you don't know which firmware is for your mobile, Press *#0000# on your phone and check the RM-XXX. The XXX represents your Firmware.

Step3: Run PHOENIX. (Make sure to exit Nokia PC Suite before running Phoenix)
Connect your phone with PC and PC Suite Mode.
Wait for the confirmation message from Windows that drivers are installed successfully.

Step4: Now in Menu bar click on File ? Scan Product.

976ffc3.jpg

Phoenix will scan your mobile information after scanning the product it will show mobile information on status bar.

c52856d.jpg

Step5: Click on Flashing ? Firmware Update. As you can see below in the image click on browse(....).From the given list select your product code and click ok.

Don't know your mobiles product code?
Switch off your mobile phone remove battery. The product code is printed on the white label beneath the battery (e.g. CODE: 0520521).

ee24f81.jpg

Step6: Now Click on Refurbish, the phoenix will start formatting your mobile.
(Note: If at the time of formatting power cut problem occur than phone may get damage. The you will have to take your mobile to Nokia Service Center).

984f27c.jpg

Formatting will take 10-15 Minutes so be patient do not remove data cable during formatting.

Step7: After Formatting Disconnect your mobile phone and you can see all the problems are gone.
Your mobile is now working like when you have purchased is.


Rate this if u like
Please comment below if you have any problem.
My website: meramobi.info

on Sep 05, 2010 | Cell Phones

1 Answer

Flashing a dead nokia n97


Hi according to my experience your problem seems to the wrong selection of flash file.So, try to download it from here n97 or if this link doesn't works please use what you have download previously .There are many flash files with a higher version.Make sure that you should select the file of your correct phone type (RM-505 or 507).....Download the flash file what it is written on your phone.After you have done this please repeat the steps.Good luck

Jun 20, 2012 | Nokia Cell Phones

1 Answer

3110c software reinstall


Here this will help you....
Firstly try to download this Nokia Phoenix Service Software 2010.08.004.41526 WinXP/XP-64/2003/Vista/Vista-64/Win7/Win7-64
Secondly download
3110c files And install it in your PC..Disconnect all usb devices.
Now connect the phone with usb data cable without power on the phone to PC.Open Nokia pheonix...Click to "FILE" and select "open product" Choose 3110c rm237.Next Click to "Flashing" and then open "FPS-8C FLASH " after opening this just click to "Close" button and again click to "Flashing" select "FIRMWARE UPDATE" NOW you can select the firmware version as well as the product code at the top right whch is showing a small browse window.Remember if the product code of the particular is not there just select the highest one.
After loading ..Click to "Dead phone" and again press to "REFURBISH"
Wait until a message shows that "PRESS POWER BUTTON" Press it and wait until the phone automatically switch on.
Good luck.......

download nokia phoenix link
http://www.driversdown.com/drivers.asp?ID=113604

Sep 28, 2011 | Nokia 3110 Cellular Phone

3 Answers

My cell fone xpressmusic 5220 is dead ad i want to flash or re-install software


Here is the procedure.

First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link 5220 file and install it to C / program files/pheonix.. after finished this installation open pheonix . Inside the interface at the> top left <there you see "File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes. If you cannot understand just leave a Comment/Click here1. thanks for visiting fixya. Good luck.

Aug 30, 2011 | Nokia 5220 XpressMusic Cellular Phone

1 Answer

How can i change my language on n97 from chinese to english?


1) Check your version on your phone by pressing *#0000#
You will see your current softwareversion (currently probably 10.something and that's why you are on this page). The model probably is N97 and the type RM-507.

It is also important you have already installed the PC suite.

2) download the new firmware via Navifirm

Run it (start-up takes a while, it retrieves data from the internet) and select the version that you want to download. Make sure that you know which firmware you want to download.
A list of all the product codes (and the ones which are already updated can be obtained here)

3) Store the files that you have downloaded in following folder:
C:\Program Files\Nokia\Phoenix\Products\RM-507

where RM-507 is equal to the code that you retrieved in step 1

You now have possession of the part that you need to upload to your phone!

To be able to flash this on your phone you need toinstall and get J(ust) A(nother) F(lasher) working

Download JAF version 1.92.62 here, and in order to get it working download OMG JAF PKEY Emulator v5: here

version 1.92.62 does not know the N97, so 1.92.64 can be downloaded. You don't need the .exe file just the .ini files. So download JAF version 1.92.64 here and only put the .ini files in the directory where you installed version 1.92.62

When this is done, open OMG *** PKEY Emulator v5. After pressing go without changing any setting you should get JAF running.

You first get an error message that Box drivers are not installed. This is OK as you don't have a box. If you get a query regarding installing new drivers keep the ones you currently have (those you got when installing the OVI suite and they are perfect)

Press BB5, now we need to tell the programm where to get the new flash files.

First select: dead USB (even if your phone is still working)
Manual flash , factory set and normal mode.

If your phone is still working you can press .ini when it's connected. It will automatically know where your You can do this by connecting your phone and press: use ini, or when it's dead press the buttons MCU , PPM,CNT and APE one by one.

You should point them to your directory

MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-507\RM-507_11.2.021_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-507\RM-507_11.2.021_prd.rofs2.V28 (SWAP the file from RM-505_11.0.021_prd.rofs2.V26 and rename it to RM-507_11.2.021_prd.rofs2.V28)
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-507\RM-507_11.2.021_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-507\RM505_507_11.0.021_uda9_001.uda.fpsx



Also make sure you click the option: Change also product code and uncheck CRT 308.
Now make sure your phone is switched off and battery is in! Now take out the part that goes into your phone untill the program tells you to switch on your phone after you pressed FLASH.

Jan 22, 2011 | Nokia N97 Cell Phone

1 Answer

3110c flashing code


hi

Firstly try to download this Nokia Phoenix Service Software 2010.08.004.41526 WinXP/XP-64/2003/Vista/Vista-64/Win7/Win7-64
Secondly
3110c files And install it in your PC..Disconnect all usb devices.
Now connect the phone with usb data cable without power on the phone to PC.Open Nokia phoenix...Click to "FILE" and select "open product" Choose 3110c rm237.Next Click to "Flashing" and then open "FPS-8C FLASH " after opening this just click to "Close" button and again click to "Flashing" select "FIRMWARE UPDATE" NOW you can select the firmware version as well as the product code at the top right which is showing a small browse window.Remember if the product code of the particular is not there just select the highest one.
After loading ..Click to "Dead phone" and again press to "REFURBISH"
Wait until a message shows that "PRESS POWER BUTTON" Press it and wait until the phone automatically switch on.
try it and vote for this answer..

thank you

Dec 24, 2010 | Cell Phones

1 Answer

Nokia 3230 dead


Download your phone's flash files with " Navifirm " ( google for it its free ) and flash your phone using phoenix service software. Using dead phone mode. And your phone will start working again.

Note: Download the right version for your phone. Never downgrade the phone.

Hope it helps. Please rate. Thanks.

Jun 17, 2010 | Nokia 3230 Cellular Phone

5 Answers

Nokia 2700 classic how do flash


hello sir i want to know that how to flash (upadate) nokia 2700c by net

Feb 23, 2010 | Nokia Classic 2700 Cell Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...