Question about Lanier 5612 Fuser Spring For Picker Finger Genuine
Error Code SC549 appears. Tried to clear service code by the following: Clear Mode, then 107, then hold red key. This does not clear the Error code. Please help.
SP 5-810, press 1 hold down OK and original type key at same time to reset. -Carl
Posted on Dec 01, 2014
You need to turn the red power switch off after you enter service mode and if there is an actual problem the code will come right back
Posted on Nov 26, 2014
Testimonial: "Yes, thank you so much for your answer. The code did, indeed, come right back. How can I learn the meaning of: SC549?"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Lanier 7328
hi im jules_09,have you tried cleaning all the ruber roller?try cleaning all ruber roller then lubricate al bushing and gears.if there is still a problem check all paper sensor it can be cleaned with alcohol.just soak the paper sensor with alcohol then let dry after a few minute then install it back again in the copier.dont soak the paper sensor in alcohol while it is in the machine.turn of the copier first
Posted on Nov 03, 2007
SOURCE: sc553 on lanier 435c
I belive that is a Richo copier.. Try this.... press the yellow clear button once then press the 1 then 0 then 7 (just press once and don't hold them) then press and hold the Red Stop button till the display changes and turn the copier Off then back On. That should clear the code, if not you may have a problem with the fixing unit... Good Luck....
Posted on Nov 13, 2008
SOURCE: Lanier 5645 copier - Code sc546
Try this press the "yellow/ca" botton, then enter 1-0-7, then press and hold the "red" stop" till the display changes. Once, it changes turn the Main power switch OFF. Not the one on the control pannel. Let it power down then turn it back ON. If the problem is still there try to turn the copier Off again and unplug the sorter/ finisher and turn the copier back ON. Is the problem gone, if so you may have to get a service person come in and repair the sorter. Good Luck.....
Posted on Apr 06, 2009
SOURCE: service code 561 error
Hello sir; Just follow my direction, it will reset your machine;
1, press "clear mode", "107", then press and hold down "clear/stop" key.
2, touch "copier SP" on the screen.
3, enter "5810-001" press enter.
4, set value to 0, then turn power off and back on again.
Posted on May 15, 2009
Tips for a great answer:
Nov 13, 2010 | Lanier 1205 Copier
Oct 15, 2010 | Lanier 5222/27 Laser Printer
Sep 14, 2009 | Lanier Office Equipment & Supplies
Aug 29, 2009 | Office Equipment & Supplies
May 15, 2009 | Lanier Office Equipment & Supplies
Oct 29, 2008 | Office Equipment & Supplies
172 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: