Question about HEALTHRIDER Exercise & Fitness

1 Answer

My healthrider was moved and won't start - HEALTHRIDER Exercise & Fitness

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Master
  • 2,044 Answers

Check the Wiring, more than likely, the wire has come loose.

Posted on Nov 21, 2014

Testimonial: "I already did continuity check on the harness and they're fine. The motor and the incline were connected direct to a power source and checked out ok. The LED is solid red telling me that the bottom circuit board is getting power. The magnet has also been aligned with a 1/8 gap. What do I do next?"

  • Todd Arndt
    Todd Arndt Nov 21, 2014

    1/8 Gap seems large... I agree that the RED LED indicates power getting to the board but did you test power going to the Magnetic? If no power, I would suspect the Controller is not working



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My HEALTHRIDER H95T treadmill is stuck in the fully elevated (level 12) angle on the platform and will not move

The incline motor is jammed due to a faulty incline sensor or incline motor assy. This is somewhat hazardous if you do not know what you are doing to remove the incline motor. Sometimes you can repair it most of the time you replace the incline motor assy. Must be calibrated upon completion.

Feb 22, 2015 | HEALTHRIDER H95T Treadmill

1 Answer

Healthrider H55t makes a clicking noise

Check the front roller. Remove the drive belt and run the motor. If the noise is not there replace front roller.

Jan 01, 2014 | HEALTHRIDER H55t Treadmill with Doorway...

1 Answer

Healthrider S500i HRTL12990 belt won't run

If you can then before replacing the Motor control board do one thing. Replace the IGBT on the control board. Igbt is the component which drive the motor. It will not cost a lot. The only thing is you should be very careful while working on the motor control board because there you can see two capacitors which is capable of store charge for a long period of time even the treadmill is unplugged. Before doing work on the control board you have to discharge the capacitor. If not it will lead to serious electric shock. You will get many pages on web to know how to discharge an electrolytic capacitor. I have add the picture of the motor control board with the igbt marked. You can find the part number written in its frond side. Replace the IGBT first.



Jan 19, 2012 | HEALTHRIDER Exercise & Fitness

1 Answer

Incline motor stays on going down, and will not respond to the controls. healthrider R 60

could be bad incline sensor or c/board is going bad. one more try bipassing the board with power to the incline motor fully powered 18volt batt will or higher will move the motorby flipping thr wires on the bat the incline should go up and down. if working ok then check board

Mar 16, 2011 | HEALTHRIDER R60 SoftStrider Treadmill

1 Answer

I have HealthRider model HRTL71830. Was using it for about 3 years. A few days ago I moved it a bit and afterwards the console stopped responding. I'm not really sure if that's the cause of the problem or...

Unfortunately, you need to replace the entire console. HealthRider's consoles are notorious for this behavior. The company that manufactures them only sells the console as a whole unit so you can get individual parts. Depending on the age of the machine you'll be looking at between $300-$800.

Jun 18, 2017 | HEALTHRIDER Exercise & Fitness

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top HEALTHRIDER Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a HEALTHRIDER Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides