Question about Televison & Video

1 Answer

I've lost power to my sharp LC24LE240E television. I've checked fuse and power socket and both are fine. Any ideas??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,243 Answers

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on Nov 21, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There's no power to my sharp LC24LE240E. I've checked the fuse and power outlet and both are fine. Any ideas??


It may be a thermal fuse. There is a thermal fuse in most modern microwaves that will kill the unit if something gets too hot in the cavity. Sometimes the magnetron thermal protector can shut down the unit. check them both for continuity.

Nov 21, 2014 | Microwave Ovens

1 Answer

2006 honda cr v power socket


Use a test light and with the key on is there power to the center wire on the socket, does it have a good ground?

Jun 30, 2017 | 2006 Honda CR-V

1 Answer

Although my turntable seems to be fine there is hardly any sound coming through my amp/speakers from it. I'm using a different power lead for it since I've lost my original but it fits fine an


your needle has worn down, or the RCA leads(red & white) arn't plugged in to the phono socket on the amp,or you haven't selected phono on the source select,or you have the tape monitor button switched on.

Jul 07, 2012 | Technics SL-BD22 Turntable

1 Answer

Brake light bulb Issue


A bad socket is a common enough problem that it is likely that, rather than a wiring problem. Just splice in a new socket, if you can, or whatever is easier and cheaper (like a tail light assembly from a salvage yard).
Of course if you have a voltmeter or testlight, you can check at the socket electrical connector for power when it should be there-when the brake is pressed.

Apr 26, 2012 | Ford Mustang Cars & Trucks

1 Answer

My xr 10x lost power last night, stopped dead. No power light or fan noise. Checked the plug, it was fine. Is there a reset or fuse on these things. What could be causing this


Hello :

If the plug is fine , then it must be a fuse or power transformer or the power PCB [ printed circuit board ] .

If it's the fuse , that can be replaced .

If it's power transformer or PCB , then you should take it to a repair shop !

good luck .

please rate !

Mar 28, 2010 | Sharp Office Equipment & Supplies

2 Answers

I LOST MY POWER INPUT CORD FOR LC-225VTU


Tries Partstore.com,if out of stock,buy it on Ebay.com or Amazon.com plug use in playstation 1,2 use the same plug.

Nov 17, 2009 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Wont power up


If you open the TV set and find that the fuse is blown, it is possible that there is a defect in one of the power supplies. It is possible that the fault is the main power supply or a backplane supply.

When replacing the fuse and if it blows again, this means that there is a short. The cause of the short must be serviced to return the set to normal operation.

Jerry G.

Apr 12, 2008 | Sharp Aquos LC-20B4U-S 20 in. LCD EDTV

2 Answers

Fuse size


I have one of these for parts, fuses look ok, but doesn't power on..do you know where your fuse is on the board?jerrye@rock.com

Jan 03, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Cindy Wells

Level 3 Expert

5126 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...