Question about Sharp AQUOS LC-70LE650U 70" 1080p LED-LCD TV - 16:9 - HDTV 1080p - 120 Hz LC70LE650U

1 Answer

Sharp aquos LC70LE650U 5 short flashes 2 long, no display

Tried reset, pull power,no change

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sharp Master
  • 17,115 Answers

Try unplugging the unit and hold the volume up and channel down buttons down and plug the unit in. Let go of the buttons and the unit should come on up the service mode. There will be a small k on the screen. With the remote press the channel up button . This should bring up a menu that will show a lamp error line. If the lamp error is = to 5 the unit is in lamp error shut down. Use channel down to highlight that line and the curser right arrow to highlight the lamp error #. Hit the enter button to clear the lamp errors. Now unplug the unit and let it sit for a minute and plug back in. If the unit does not come on by doing this or if it does and you do not find lamp errors the power supply pcb may have been damaged .

Posted on Nov 21, 2014

  • 7 more comments 
  • Brooke Plotnick
    Brooke Plotnick Nov 02, 2017

    Tried that and still nothing :(

  • Brad Brown Nov 03, 2017

    Nothing as in no service mode or what

  • Brooke Plotnick
    Brooke Plotnick Nov 04, 2017

    Sorry about the delay. The screen does not come on at all.

  • Brooke Plotnick
    Brooke Plotnick Nov 04, 2017

    The inverted V stays on solid, but no screen light.

  • Brad Brown Nov 04, 2017

    IF you are getting nothing on the screen and you have sound, look at the screen up close with a flashlight and check to see if there is an image. If there is then it is the back light and that could be either the lights or the power supply. If you have no sound and no display then it is most likely the power board.

  • Brooke Plotnick
    Brooke Plotnick Nov 05, 2017

    Thanks Brad, I appreciate it. Any idea how expensive the power boards are? I might just pitch it.

  • Brad Brown Nov 06, 2017

    http://www.shopjimmy.com/sharp-runtkb131...

    Check the oem number on amazon and ebay too

  • Brooke Plotnick
    Brooke Plotnick Nov 06, 2017

    Thanks for the info. I appreciate it. I'll look into it :)

  • Prince s Dec 06, 2017

    good answer, that worked for my case

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 148 Answers

SOURCE: Sharp Aquos LC30HV4U stopped working

You are in luck!..The units poowerboard is overheating and since you have it taken apart already this is the fix for you!...Check the popped capacitors in the metal box you find on the back of the actual screen inside the unit...This is a very common problem,m so I've helped many this way and wrote a general post on the how to's of diagnosing and repairing the problem, follow these steps and your tv ill be good as new for less than $5.00 before feb 5 th!! :P...Here it goes (please rate if this works out :D).....................The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way, if the tv takes an abnormal amount of time to "warm" up then it most likely will go out all the way sometime in the (near) future. If you have a tiny bit of will and knowledge ypou can open the unit and get to the print board. Examine this for "popped" capacitors, they will have a buldging top instead of a flat one. Im gonna try to include a pic of them here, if i can get it this time, I've tried bfore lol. But you can google image a "popped" or "bad" capacitor and you would be able, with ease, to diagnose if you have any of these. Usually only one or two. Radioshack sells capacitors (couple anyway) for $1.59 each. MAKE SURE the replacement is of the SAME voltage or HIGHER, or you will be right back replacing those 2. Every capacitor has a negative pole marked with an (-) on the side of the capacitor(by one of the "legs", always puit the negative (-) "leg" of the new capacitor in the same hole in the printboard as where the previous negative (-) "leg" of the capacitor was ( a capacitor with the negative and positive "legs" put in backwards will result in the new piece "popping" as sson as you turn it on!!) make sure the "uf" rating (for example the most common popped capacitor is the 1000 uf) is the same as the one you are replacing. I needed 1000 uf, 105 c and 26v (volt) ratings for the 1 capacitor I needed to replace to fix my LG 19" lcd panel monitor I found by the trash that the light came on off, but it didn't come on. I replaced that capacitor with ; 1000uf, 85 c and 36 v (volts0...It works fine eventhough the volts and the temperature rating (36v and 85c) was not the same as the (26v(volt) and 105c ) capacitor I removed !! Further, I've replaced capacitors that had the celcius rating of 105 with the only ones Radioshack had, namely 85 c(celsius) they have been working great, but I'm not sure about any effect, nor have I heard or read (yet?) about that making an urgent difference. Many threads that I've read people have done the same, so we should be ok (my stuff has been running good for a while longer then most brand new ones!.............(all these ratings ; 'uf ' and 'c' etc are on the side of the capacitor you are replacing and on the side of the ones you are replacing them with)...For all this all you need is the cheapest solder gun u can find (I bought one for $7.99 at Radioshack), a camera (to take pictures as you go to remember how to reassemble the unit) and, once you have your materials, 20 minutes to replace 2 or 3 capacitors and you are good to go...Most monitors and tvs (lcd/plasma) I've seen you have to lay flat on the ground/bed/blanket etc, to work on (screen side down). Usually there are 2 or 3 screws (or a few more) to remove, then you will have to carefully (its comes off easily most times)insert a flat screwdriver inbetween the casing and gently pry it up as you go around the whole frame. Sometimes you have to remove the little washer arouind the cable input orso, just be gentle and you cant go wrong. Once insidet here will be a box with wires running to the sides etc...unplug, gently, these wires and open the box. Inside you will find 2 or 3 circuitboards, check them all for "popped" capacitors, replace, reassemble and plug it in....Have fun becoming an overnight tv mechanic lol!

If this has helped anyone (or not) then please rate, thank you!

Posted on Feb 03, 2010

  • 53 Answers

SOURCE: No POWER

How many times does the POWER led flash per second? (Dont worry about the OPC).

1x (steady constant blink) = Lamps or inverters
2x = Power Supply
3x = Main Unit

If i am reading it correctly, looks like the POWER led is flashing 2x, which means it is a power supply failure. Either way, your TV needs to have a board replaced, there isn't anything you can do to fix it yourself. Try locating your local sharp authorized service center to repair your TV (1-800-237-4277)

Posted on Mar 16, 2008

  • 6 Answers

SOURCE: Sharp Aquos 32 wont turn on

I called up Sharp, and if you are a part of Sharp AQUOS Advantage Program you get free in home service.

They were very nice about it, and I already have a technician coming to my house on Saturday and I called on Wednesday.

I doubt Sharp's policy alot less now!

Posted on Sep 03, 2009

  • 8457 Answers

SOURCE: We have a Sharp Aquos LCD TV 42 inch. When I

Call Sharp for warrenty repair.This problem very common in Sharp tv.Picture will come on turn power on/off button few times will work.But still under Wareenty call to Sharp to replaced the main Tuner Signal board.

Posted on Jan 15, 2010

Testimonial: "Have tried turning on/off a few times but still doesn't work. thanks anyway"

  • 1 Answer

SOURCE: sharp 46 aquos model LC46E77UN tv turned off power

Unplug it hold down the Channel Down button and the Volume Up button unplug it for 10 seconds then plug it back in and continue holding them down for another 10 seconds then release. I had the same issue and this fixed it now I have another though *~*

Posted on Jun 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset a JVC Emerald TV model EM37T. Power light comes on then Dims but no picture. It was working last night. This TV has no controls on Side, only the inputs and the power button.


There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Apr 15, 2017 | JVC Televison & Video

1 Answer

I have a 70" sharp aquos and the picture has gone weird colors model LC70LE650U. Has the t-con board gone bad and needs to be replaced?


If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size. Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Oct 05, 2016 | Sharp Televison & Video

1 Answer

Sharp LC70le650u dead set, error code, 2 sloww flashes 5 fast. I have done a reset twice


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jun 07, 2016 | Sharp 60" LC-60LE650U AQUOS Full HD Smart...

1 Answer

I have changed the power supply and led's. When I first had problems the blue power light would come on then go off. After I had changed the items the blue power light still stays on?


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Apr 08, 2016 | Vizio E-Series E470I-A0 47" LED TV...

1 Answer

2 5 BLINKING CODE


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Oct 20, 2015 | Sharp AQUOS 70" 650 Series LED HDTV -...

1 Answer

Sharp aquos tv, model no. lc-70c-6500u, no audio, visual at power up, standby/power light flashes 2 times long, 5 times short, nothing else happens, what is this mean?


Sounds like main board fault. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jul 28, 2015 | Sharp Televison & Video

1 Answer

I have a sharp aquos lc-70le650u, will not turn on, power light flashes rapidly 2 times then 5 times


I'm not sure about this one since I never worked on 1 of them.. But I did find a link that you can check on. http://www.badcaps.net/forum/showthread.php?t=41773. Good luck on it

Mar 02, 2015 | Sharp AQUOS LC-70LE650U 70" Class Full HD...

3 Answers

How to fix canon p200 5B00 error


pull the power cord....let it sit unplugged over night...plug in the next day....go to reset default.....try to change the date and reset.....

Jun 30, 2014 | Canon Office Equipment & Supplies

1 Answer

Display blank Sharp LC70LE650U


How many times this standby/power light blinks at one time switch ON?Count it carefully.These blinks are fault indication, and known as blinking codes.From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV.This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/.If the blinks continues, and non-stop, the fault should be with its main system control IC, and with the memory IC.

Dec 21, 2013 | Sharp Aquos Televison & Video

Not finding what you are looking for?
Sharp AQUOS LC-70LE650U 70" 1080p LED-LCD TV - 16:9 - HDTV 1080p - 120 Hz LC70LE650U Logo

4,312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75311 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...