Question about Dewalt DC011 AM/FM Radio

Open Question

The dco11 dewalt radio is getting internal interference . it purlses like the red indicator light . charging or not the radio pulses

Everything works except the pulse in the radio.

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Cerfer39
  • 709 Answers

SOURCE: dco11 got wet, charges but no radio

HI BVanhook,,

You have probably increased damage by trying to power the unit when it is wet. Any time you get electronics wet, you should not apply power when a chance the circuit is wet. This is becasue a form of Electroplating occurs. Metal from one circuit trace will move to another. Heat will build from short circuiting and the circuit will destroy itself.
Disassemble the Radio and Display, dry it throughly. Do not apply any more power until you have thoroughly inspected the circuitry with a magnifying glass to see if any of the Electroplating occured. Clean it up by scratching the short circuits between the traces to clear the connections made by the Electroplating. Good Luck

Posted on Nov 25, 2007

Ad
  • 60 Answers

SOURCE: Dewalt DCo11 worksite radio W/ charger. Only works

Check to see if you have voltage out of transformer, more than likely you won't, if theres no voltage out of your tranny it needs a replcement.

Posted on Nov 15, 2009

  • 1 Answer

SOURCE: when i switch off dewalt dco11 radio the station

Does the clock lose time too? 2 AA batteries under a door inside the battery compartment. Change them, reset time and stations.

Posted on Feb 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

DW 911 radio works on mains power but not with battery inserted


Change the battery connector pcb board part# 5140019-41 12.07 on ereplacementparts.com

Dec 06, 2014 | Radio Communications

2 Answers

Dco11 got wet, charges but no radio


HI BVanhook,,

You have probably increased damage by trying to power the unit when it is wet. Any time you get electronics wet, you should not apply power when a chance the circuit is wet. This is becasue a form of Electroplating occurs. Metal from one circuit trace will move to another. Heat will build from short circuiting and the circuit will destroy itself.
Disassemble the Radio and Display, dry it throughly. Do not apply any more power until you have thoroughly inspected the circuitry with a magnifying glass to see if any of the Electroplating occured. Clean it up by scratching the short circuits between the traces to clear the connections made by the Electroplating. Good Luck

Nov 25, 2007 | Dewalt DC011 AM/FM Radio

1 Answer

My dewalt radio and charger are dead. When I plug it in the red charge light comes on for a second, then nothing. Dead...


We are sorry to hear this. I have attached a link so you can get in contact with one of our repair centers. The repair centers will take your warranty into consideration as well. Please click the link provided and search with your preference. DEWALT com

Oct 05, 2014 | Dewalt DC011 AM/FM Radio

1 Answer

Dewalt dco11 radio has static on every station tapping on it and tilting it and giving it a tap helps any solutions adjusting antennae doesn't help


Either the antenna connection at the back of the radio or at the antenna (or severed antenna cable) can cause this.
Another possibility is the tuner in the radio is bad. Remove radio to check antenna connection into radio.

Apr 10, 2014 | Cars & Trucks

2 Answers

When i switch off dewalt dco11 radio the station memory is lost


Does the clock lose time too? 2 AA batteries under a door inside the battery compartment. Change them, reset time and stations.

Feb 06, 2010 | Dewalt DC011 AM/FM Radio

1 Answer

No power to the radio but charger works


could be few issues, as of cracked boards, if you dropped it few times, or short in output/ internal power distribution. must be open by tech and troubleshoot properly. Definitely, not a do it yourself job.
Sorry.

Jan 27, 2010 | Dewalt DC011 AM/FM Radio

1 Answer

Dewalt DCo11 worksite radio W/ charger. Only works with batteries. No 120 V. Checked fuse. OK


Check to see if you have voltage out of transformer, more than likely you won't, if theres no voltage out of your tranny it needs a replcement.

Oct 30, 2009 | Dewalt DC011 AM/FM Radio

1 Answer

My dewalt dw911 radio/charger works on either mains or battery but wont charge a battery and blows an internal fuse when both are used together


More than likely your internal charger is faulty. Inside your inernal charger unit check the 2 anmp fuse which is white in colour.

Oct 24, 2009 | Dewalt DC011 AM/FM Radio

3 Answers

Dewalt battery charger won't charge


As you know, solid red on your charger means that the battery is fully charged and the BLINKING red light means the battery is charging. Unless the light is blinking irradically everything is working the way it is supposed to. If the light is blinking irradically, the battery may just be too hot or too cold to charge ( like when you are driving many lags and your battery dies) and in this case simply wait 15 minutes to charge. If you get a fast blinking light still, the problem probably is with the battery.

Oct 07, 2009 | Dewalt DW056 18 Volt Cordless Impact...

Not finding what you are looking for?
Dewalt DC011 AM/FM Radio Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Audio Players & Recorders Experts

Gyula Lacz

Level 3 Expert

483 Answers

Rani wadia
Rani wadia

Level 3 Expert

996 Answers

Tom Chichester

Level 3 Expert

34781 Answers

Are you a Dewalt Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...