Question about Zenith B25A02Z TV
I have a Zenith Model B25AO2Z tv and programmed it through my cable remote. I just got a new cable remote and the first step to program a tv is to turn on the tv. I can't do that because the tv remote doesn't work and the power button is broken. Is there any other way to turn the tv on?
Have you ever tried to fix tv remote? Most of the remotes don't work due to broken led connection (Red circuled area). Try to resolder it, may be you might work it.
Posted on Nov 20, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I cannot reset the channels
You have a hotel/motel model that cannot be programmed or any of the settings changed without a special Master remote. Sorry, doubt that you can buy one from the store, they are not sold to the public. Contact the hotel where you bought the set and try to get the model number for the remote from them. This is a different number than the model number of your tv.
Posted on Dec 25, 2008
while holding down the tvs power button push the channel up or down slowly. this will turn your tv off when your code is found. when it is found and your tv goes off release the power button. now your remote will work with your tv...........
Posted on Jan 02, 2009
if you can get to menu to unlock the channels type in 0000 or 1234 or 9999 or 0001 orif this doesnt work you could take back off tv and remove the little battery that looks like a coin out. becareful, this is high voltage in there.........
Posted on Jan 02, 2009
SOURCE: my tv is locked
They have an internal battery for transport between rooms so as not to lose any pre-programed channels or info while unplugged. So to beat this you will have to unplug it for a few days and let it clear its memory. Mine needed almost a week but when its turned on after the right amount of time it will ask to do a channel search. So make sure you have it hooked up to cable before running that search or you will have to repeat the previous steps. Hope this helps.
Posted on Jan 05, 2009
Tips for a great answer:
* With the remote control in hand, press the POWER key to
turn on the Presentation TV.
** Press MENU repeatedly until the Setup menu appears.
*** Using the Up/Down arrow on the remote control, highlight
Auto Program on the screen
**** Press the Right or Left arrow to go to the Auto Program
***** Using the Up/Down arrow, choose either Cable TV or Off-
Air Antenna on the screen.
****** Press the Right or Left arrow to begin the Channel Search.
******* Press ENTER when the channel search is done.
Note: Auto Program finds channels being received by the TV
Cable will not work unless you subscribe to a cable service
Jun 17, 2011 | Zenith H27E35DT 27" TV
Aug 30, 2010 | RCA DIRECTV Satellite Remote Control
Aug 04, 2010 | RCA 3-Device Universal Remote
Oct 16, 2009 | RCA Universal Remote Control
Aug 23, 2009 | Zenith Z37LZ5D 37 in. LCD TV
Mar 21, 2009 | Philips Magnavox Learning Universal Remote
Nov 21, 2008 | Zenith DBZN-311 Remote Control
Mar 18, 2008 | Televison & Video
Oct 27, 2007 | Zenith DBZN-311 Remote Control
55 people viewed this question
Usually answered in minutes!