Question about Boating
I've put the problem in the top info box.
Go to honda outboards in the search.. see if you can download a printout.. you may need to call your dealer see if they can get one also..
Posted on Dec 12, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: gear box oil leak
Here is a website where a manual for you outboard may be purchased. Outboard Marine went out of buisness in 2000 and thus no parts of origial manufacture are support is available . Therir are secondary markets .
THe Lower case splits in half and their is a seal around the prop shiftm which is pressed in. The seal between the cases are cut o-rings which are placed and glued into place with gasket seal.
The water pump is located where the case splits a little bit higher. You must open the little port on the side and take out one of the screws to the connecting shift linkage to split the case. After splitting the case the drive shaft and water pickup tube(s) wil come out of the powwer head or the tubs may stick into the power head which is ok. Place the lower skag into a vice and remove the 4 or 5 screws to the water pump housing. Remove and replace impellor and impellor plate if available. If part(pieces) of the rubber impellor is missing flush out the tubes and the power head to remove them. When reinstalling the lower unit use a flash light to make sure that the tubes return to the proper place in the power head and the shift lever is resecured. If you need more assistance, just write back. I was an Outboard motor mechanic for five years about the time of your motor.
Posted on Dec 23, 2008
It sounds like there is a short in the alternator or wiring for alternator. You are continuing running with the battery cut off. But the outboard generates its own power and its finding the way to the ignition. As for grounding, you may be idling too high for a quick shut off.
Posted on Jun 18, 2009
save yourself some money and go get a lawn mower solenoid and find a way to mount it yourself. I have done a johnson outboard and a tigershark jet ski this way with no problems.
Posted on Jun 21, 2009
Tips for a great answer:
Apr 24, 2017 | 2011 Hero Honda Passion Pro
Jun 15, 2013 | Light Outboard Motor Boat Bass Fishing...
Jun 18, 2012 | 1983 Honda GL 1100 Gold Wing
Mar 19, 2012 | 2003 Honda CBR 600 RR
Feb 21, 2012 | 1994 Honda VT 1100 C Shadow
Oct 10, 2011 | 2007 Honda CBR 1000 RR Fireblade
Sep 12, 2010 | 1998 Honda CBR 900 RR Fireblade
Jul 10, 2009 | 1997 Honda Accord
May 01, 2017 | 1973 Honda CB 100
Apr 04, 2009 | 1992 Honda Prelude
99 people viewed this question
Usually answered in minutes!