Question about Memorex Computers & Internet

1 Answer

How do I clean the laser on a Memorex CD mini stereo with a 3cd changer

The cd's skip. I have tried to clean it with a disc cleaner. model number 9299M, made in 2009

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Memorex Master
  • 6,702 Answers

It is not even sure your laser is dirty. Perhaps you only have some bad CD's?
Does it also skip, with real music CD's. I mean the ones that are not burned in a computer. Not all self mad disks are good enough to be played and not all players can handle the self produced disks.
The cleaner you could use, is a CD, with a little brush glued on it. Don't try to make one, just buy one.
See the little red bus to the left of the middle.


how do I clean the laser on a Memorex CD mini ster - 25289203-qj532vtjsqner5bmetfl14fj-2-0.png

Posted on Nov 18, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 22 Answers

SOURCE: No playing CDs

go to website of bell computer 1. find the latest BIOS and download it to your computer 1. find the latest driver for your CD model and download it Good luck!

Posted on Feb 01, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Disks skip and do not play


try putting a laser disc cleaner through the player it will clean the lazer allowing it to read correctly



best of luck

Add a comment
sonicboomele.jpg

  • sonicboomele
  • 1 day ago
sonicboomele_0.jpgthis is what they look like the small brushes clean the laser

Reply

Dec 29, 2010 | Sony CDP-CE375 5-Disc CD Changer

1 Answer

When a cd is playing it skips back to beginning of cd & will not advance to next song or it skips the cd entirely & will not continue to play


unfortunately if your disc is clean and scratch free your laser will be weak and need replacing,, on that model cleaning the laser is a waste of time and money as its a sealed cabinet --check for flaws on your disc itself

Sep 01, 2010 | Sony CDP-CE335 5-Disc CD Changer

2 Answers

3 disc Phillips cd player sometimes skips. It is


At some time in its life, the laser that reads the CD starts to get too weak to operate reliably. That's probably what's happening here. Unlike mechanical parts that can be inspected for wear, electronic parts tend to work fine one day, then the next, poof. The laser assembly is replaceable if you can locate the part and find someone to install it. An electronic service shop could give an estimate for repair. If you can provide the full model number, I'll see if I can find the part number.

Mar 08, 2010 | Teac AD-600 3-Disc CD Changer

1 Answer

Err message on 1999 Jeep Grand Cherokee 10 CD changer


I had a similar problem which responded to the use of a CD cleaner disc to clean the laser lens reading the CD. The "err" messages stopped and the changer started to work as it had before. Perhaps this will correct your problem too.

Aug 02, 2009 | Jeep AM/FM Cassette with CD Changer...

1 Answer

MY CD PLAYER SKIPPING ON EVERY FOURTH TRACK ANY SOLUTIONS


could be a coincidence make sure your cds are clean, clean the dust and grime off carefully with a very fine material soft cloth, cleaning from the inside to the outside but not in a circular fashion but in line formation from inner to outer ok...

also try using a cd head cleaner cd to clean the laser, the laser could be dirty

Jun 23, 2009 | Teac PD-H303 3-Disc CD Changer

1 Answer

2002 Landcrusier 6 CD changer - CD's all skip at some point.


HI.. CD CLEANERS DONT WORK....IF YOU HAVE THE TIME.. REMOVE THE WHOLE UNIT OUT..AND CLEAN THE LASER...(Q-TIP,CLEANER)IF YOU THINK IT MAY JUST BE A DIRTY LASER IT'S SOMETHING TO TRY.. BEFORE GETTING A NEW ONE ..WITH OUT LOOKING AT IT IS HARD TO SAY.. CHECK ALL CONNECTIONS ALSO.. GOOD LUCK

Feb 18, 2009 | JBL MCDC100 6-Disc CD Changer

3 Answers

RS 2653


I had a rca system similar to this little different. It's a problem you'll find in any cd player after awhile. You'll need to replace the laser. It's quite easy google for some instructions to replace a cd laser. Look around for a laser that can read cd's and cd r and cd rw and you'll be ok. The disassembling might be a bit tuff but it's worth it. I had to replace my hifi laser and after i did sound was incredible again no skipping. Make sure when opening your system you power it on and unplug it to make sure all charge is gone wait 30 minutes or so before you go and operate.

Feb 10, 2008 | RCA 100-Watt Stereo System With 5-CD...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Memorex Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Jax Planet
Jax Planet

Level 2 Expert

922 Answers

Are you a Memorex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...