At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please click on the link bellow or if that does not work just copy and paste in to any browser. This is the software that includes everything you need for your printer including Fiery.
The fiery network info can be found by pressing the small "i" in the bottom corner of your screen and selecting the config option. You can also access fiery settings by pressing "utility/counter" followed by "controller detail".
No, but the fiery will just speed up your prints etc.. I have the c3380 and c5185, they are stand alone with no fiery. If you are buying this machine for office coping it will be fine. But remember! this is a Buisness Color machine. In my customer base the 80's have done well as long as you run them as an color machine and not the office black and white work hourse. The color prints are great without any help from fiery. Sales people will try to sell you all!!!!
If you go into the Setup menu from CWS, and log in as the Administrator, you will see all of the scanning settings that you are able to manipulate. Also, this should be covered in your service contract with the company that sold you the machines.
Hello a Fiery print controller is basically a computer, which needs to be rebooted once a week to get rid of temp. files. Try shutting down each fiery every Friday and restarting Monday morning and your problems will be resolved. What model Fiery's do you have (IC-408, IC-901),? let me know which model and I can see if their is a patch to correct this issue. [email protected]
PS: I am full line KonicaMinolta dealer
Fiery.. you would need to acess the fiery network controls from the touch panel. on the copier, reset up the ip address etc. reboot the fiery. Fiery are a bit different from the standard acess to a nic card on a machine. Again I really am not familiar with Cannon. Thou I would recomenend searching for a Fiery set up manual,
ok the driver for the printer is at imagerunner.com support/ drivers/ office-production then look for imagepass E-1 im assuming you have a print controller attached to the copier. i think you can also get the guides there also for the fiery... Not sure about manuals for the copier never looked
You need to enter into servic e mode and tell the MFP to use the Fiery instead of the built-in empron.
A service tech can do that in les than 5 minutes for you.
×