Question about Electronics - Others
The machine has been converted to a USB approx 15 months ago. This morning we put a flash drive into the drive and got error BC1 which means cannot read files. We then tried all the other sticks and the same error came up. It worked fine on Friday and the machine was off all weekend.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: embroidery stick
You need the USB Manager software to view the files. Have a look at all the software that were supplied with the machine. Load the embroidery software on your laptop and then open the USB manager.
When it opens it will show a light blue screen and grey icons to the left. Click in "disk", then click on "read disk" and you should be able to see your designs. The grey icons will turn orange were designs are stored, and the grey ones indicate empty space for more designs.
Enjoy your fantastic machine
Posted on Dec 18, 2007
Push the floppy drive lid inwards and do the following:
First of all, check for any visible thread or dust inside the floppy drive.
Secondly clean the drive by blowing it with compressed air.
If this does not help, it is time to upgrade your machine to USB. Great to work with. Cost: plus minus $500.00.
Posted on Nov 17, 2008
Due to the U3 technology, i.e. the files you deleted which were on the drive when you got them, you may have caused the drive to malfunction because the U3 software was not uninstalled, but rather deleted.
Please attempt to reinstall the U3 software on the Sandisk website, named "U3 Launchpad Installer"
which can be found at this link: http://www.sandisk.com/Retail/DriverDownloads.aspx
If you are still having problems, either reinstalling the software or with corrupt files, please report any errors exactly as you see them.
Posted on Dec 15, 2008
Welcome to Fix Ya!
Are you trying to transfer a built-in pattern from your machine to a USB flash drive? I'm not sure if built-in designs can be transferred in their original form. You might try editing the design a bit, save it to a memory space, then save it to the memory stick. If you have a manual, it should describe how to move designs from your embroidery machine to your computer, and vice versa.
If you are other readers have time to rate my answer, you'll help me become a better expert. If you can give me more specific information about what happens when you try to upload a design from your machine, and whether you have a manual feel free to leave a comment and I'll check back with you. Cheers, Ginny
Posted on Feb 12, 2009
Tips for a great answer:
Jan 25, 2016 | Sewing Machines
May 17, 2015 | Brother PE770 Embroidery Machine w/ USB...
Feb 06, 2015 | Sewing Machines
Nov 18, 2014 | Sewing Machines
Aug 25, 2014 | Sewing Machines
Jul 15, 2013 | Sewing Machines
Jul 11, 2010 | Husqvarna Designer I
Jul 31, 2008 | Computers & Internet
259 people viewed this question
Usually answered in minutes!