I need a manual for WQP12-9011C dishwasher

Some dishwashers like your model number are under recall for a potential fire hazard due to water leaking through the heating element posts onto the wiring.
Your serial number must begin with the 2 letters listed . Below is the list of recall serial numbers: FL, GL, HL, LL, ML, VL, ZL, AM, DM, FM, GM, HM, LM, MM, RM, SM, TM, VM, ZM, AR, DR, FR, GR
Call the phone # below or check out GE recall website. What GE does is replace the element and gaskets, unless there is burnt or arcing visible on the wires, they may replace the dishwasher.

www.geappliances.com/products/recall
GE has determined that an electrical failure in the dishwasher's heating element can pose a fire hazard. GE will provide a free repair to all consumers with units affected by the recall. We ask that you not use your dishwasher until it is repaired and to disconnect the electric supply by shutting off the fuse or circuit breaker controlling it and inform all users of the dishwasher about the risk of fire.
Consumers who instead wish to replace their dishwasher with a new model can receive a rebate towards the purchase of certain new GE and Profile brand dishwashers. Consumers can use a rebate of $75 for the purchase of certain GE front-control plastic tub dishwashers, or a GE rebate of $100 for the purchase of certain GE front-control stainless tub dishwashers or GE Profile top control dishwashers. See the rebate form for eligible models.
GE is aware of 15 reports of dishwasher heating element failures, seven of which resulted in fire and smoke damage beyond the unit. No injuries have been reported.
The model and serial numbers are important, as not all dishwashers are included in the recall. Look at the inside on the front left side of the dishwasher tub to find the model and serial number.
This recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission, which will also monitor the effectiveness of the recall program.
Recall Hotline
866-918-8760
Monday through Friday, 8 a.m. - 5 p.m. ET.
Before calling, have the model and serial numbers on hand.

• 
  

Customer Care

• Find a Dealer
• Register an Appliance
• Service an Appliance
• Troubleshoot an Appliance
• Find Parts or Accessories
• Check Parts Order Status
• Return a Part / Accessory
• Browse Videos
• Recall Information
• Contact Us

You are missing a digit in the model number. KitchenAid Dishwashers have a number (0-6) after the SS.

The KUDI01FLSS0 installation guide gives the dimensions of the dishwasher opening and the unit itself on various pages. See http://www.kitchenaid.ca/assets/pdfs/literature/Installation%20Instructions%20-%208524480.pdf . The top vent and the front vent KUDI01FLSS model washers are slightly different. The front vent dishwasher dimensions are 33 7/8" H (with the wheels removed) x 23 7/8" W x 24 7/8" D (including the handle). The top vent model is only 24 1/2" deep. With the wheels in their lowest position, the opening for the dishwasher must be 34 1/2" high (from floor to the bottom of the counter top).

I hope this helps. Other KitchenAid appliance manuals are available here: http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=KAD . Use the search box to enter the model number and use the drop down menu to select Consumer.

Cindy Wells

Hi There,
I am a customer service rep from Danby. I'd like to help you out but I need some more information.
How long ago was the unit purchased?
What is the model number of the unit?

Thanks!

no part numbers in the manuals that I have for it, but the brackets are called "installation brackets", ad come with wood screws.
The install manual is part no 3828dd3003e

lg electronics (Canada) 1-888-542-2623. or ca.lge.com

good luck

Hello,
If there is no number on the sides of the door edges,you can try taking the kicking unit off units below dishwasher and look at base plate of dishwasher if not there then you will have to remove unit and see if there are numbers on the top sides or rear of dishwasher.

Hope this helps.

all you need is the name brand and model number of the dishwasher in order to purchase a control for your dishwasher. this is found usually on the door or door frame

Hi,

You could purchase it from :-

http://www.espares.co.uk/part/dishwashers/smeg/p/1083/1213/0/0/969614/dishwasher-motor-housing-.html

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

The inlet valve will be at the dishwasher end of the (hot) water inlet line. On this dishwasher I ~believe~ the inlet valve is near the rear of the unit. That means that you will need to pull the dishwasher out to get to it. Remove power from the dishwasher as soon as you can before messing with the unit.
Just past the connection of the supply hose and the connection on the dishwasher, there will be the valve (a solenoid valve with two wires coming out of it.) That is the little beast that has most likely failed.
Good Luck!

You can download the manual you need by going to this link:
http://www.jacksonmsc.com/?xhtml=xhtml/jac/us/en/general/productdownloads_service.html&xsl=productdownloads.xsl
Hope this helps,
Kermit

Here is the link to the user manual if you need it; http://www.roperappliances.com/data/8575997.pdf Page 17 gives all the numbers to call for replacement front panels. here is the link to the installation manual; http://www.roperappliances.com/data/3385181.pdf Page 13 onwards tells you all you need to change the panel. Hope this helps :)