Question about Sewing Machines

1 Answer

How do I transfer embroidery designs onto the expressive 900 machine without the digitizing software? Can I even do this?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

You can purchase design and send them directy to your sewing machine. It has direct connect PC . Which means you can connect it directly from your computure and transfer designs to your sewing machine. Also you can purchase designs in your format from different web sites. They will E mail them to you. Then save them to a USB stick. You can load them from a USB stick into your sewing machine .Look for 2 gig USB sticks ,because when you use larger ones it takes a long time to load the designs. The only drawback to not owning sofeware is you will not be able to see the designs if you chose to save them on your computure. Embird has a 30 free trial and is reasonable priced. It give you the ability to convert designs from other formats and use them in your machine. It will open zipped designs and acts as storage unit for your designs. I do not represent them but i found that it is less expensive than many companies and works well.

Posted on Nov 19, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
dupina
  • 110 Answers

SOURCE: embroidery stick

You need the USB Manager software to view the files. Have a look at all the software that were supplied with the machine. Load the embroidery software on your laptop and then open the USB manager.

When it opens it will show a light blue screen and grey icons to the left. Click in "disk", then click on "read disk" and you should be able to see your designs. The grey icons will turn orange were designs are stored, and the grey ones indicate empty space for more designs.

Enjoy your fantastic machine

Posted on Dec 18, 2007

  • 3 Answers

SOURCE: embroidery downloads baby lock ellure plus

If not a USB model, you have to get the disgustingly expensive Babylock palette box ($500) and software with the blank card to transfer the designs from cd or files. Beware of making the embroidery too small, it can make the stitch density too great and then the machine cannot sew the design. There is software called Density Works to deal with this problem.

Posted on May 07, 2008

mohammed387
  • 1952 Answers

SOURCE: embroidery sewing machine ''emotions'' EM1

www.embroiderydesigns.com/free_embroidery_design_download.aspx

Posted on Jun 12, 2009

  • 1 Answer

SOURCE: Baby Lock Embroidery Sewing Machine

I had the same problem and after buying a new card, found out that you get that message if the pattern you are trying to transfer is too big. reduce the size of the pattern and see if that works

Posted on Sep 30, 2009

  • 192 Answers

SOURCE: I have a Designer 1 sewing machine and

3D software does not run on Windows 7.

4D does.

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to copy files from the tablet to a flash drive


About 2,440,000 results (0.72 seconds) Search Results

    Transfer PES Embroidery Files to USB - YouTube

    ? 6:26
    https://www.youtube.com/watch?v=dKlRpgR0k4s
    Aug 15, 2013 - Uploaded by A Stitch in Time
    This is how to transfer our PES embroidery files from our embroidery album on our ... onto a USB memory stick so that our Brother or Baby Lock machines ... ... Singer Futura Quintet:Stitching an Applique Embroidery Design!

    Copying Embroidery Designs to USB Drives - YouTube

    ? 7:29
    https://www.youtube.com/watch?v=DNtbOYz23uk
    Jan 23, 2013 - Uploaded by Brad Martin
    ... how you can easily copy embroidery designs to a customized folder on your USB Drive. ... Brother PE-770 Embroidery MachineTutorial: How to use a USB for .pes file import - Duration: 6:49. Guys Can Sew 12,687 views.

    Amazon.com: 4gb Flash Drive 'Vintage Sewing Machine ...

    www.amazon.com/...Machine-Transferring.../B00QT2...

    Amazon.com, Inc.Amazon.com: 4gb Flash Drive 'Vintage Sewing Machine Lilac'. Works with Pc and Mac, This Pen Drive Is Great for Transferring, Storage or Backup Files or ...

    Amazon.com: Customer Questions & Answers



Jan 25, 2016 | Sewing Machines

2 Answers

How do I get pes files open8 using windows 8


In order to 'see' the .pes files you have to have some software to read it like embird or embrillance. Embird is $164 but has some neat features such as being able to change colors and convert from one type embroidery files to another. You can just transfer them to the USB drive by: Plug in your drive, copying them, eject the usb drive, and then plug it into the machine. The machine will read it without you having a program that can read machine formats.

Dec 07, 2014 | Brother PE770 Computerized Sewing Machine

1 Answer

I just bought a 730 Bernina sewing and embroidery system. I just tried to send design to embroidery machine and got the message I have no memory left. How can I add memory?


My suggestion is to transfer unused designs onto a USB stick or connect your sewing machine to your computure and save them.Then you can delele them and have enough space to put additional designs on your machine.You can call your dealer and ask, but I dont think it can be done without sending it back to the manufactor. If it can be done it would know doubt be fairly expensive.

Nov 20, 2014 | Bernina Sewing Machines

1 Answer

How to transfer embroidery patterns to Brother sewing/embroidery machine


Machine designs first designator is the file name. Your machine shows the file number for the design you want. You do still need to "select" that design number shown to actually begin teh file transfer from a thumb drive or cable direct from your computer if your machine has that feature.

Cheers,
Kelly
Embroidery Services
San Diego, CA

Aug 22, 2014 | Brother SE400 Computerized Embroidery and...

1 Answer

How do you place an embroidery design from a card into the machine memory? I have a ESe2. Thanks!


For the Brother NV1500 (aka Babylock Esante ESE2).

Bring the embroidery design onto the screen.

Press the save button in the upper right of the screen.(it looks like a pocket)

See pages 141 to 143 of your instruction manual "Saving Embroidery Patterns In The Machine's Memory"

Mar 18, 2014 | Baby Lock Esante

1 Answer

I have a #1 machine


If you purchase a reader/writer unit with a rewritable memory card in the format for your machine, you will not need additional cards.

Copy the designs from the CDs to the hard drive or insert the CD as you need to access a certain design and then copy the selected designs to the memory card.

The card can only store a certain number of designs and then you reload when you want a different design.

You can get this unit from a sewing machine dealer, but they are less expensive on-line.

Always check with the vendor before purchasing to be sure the unit will work with your brand/model and machine embroidery format.

http://www.allbrands.com/products/abp10248-0165.html

Apr 10, 2010 | Husqvarna Viking 1

1 Answer

Viking Rose 605 does not read anything but Win 98.


Ebay may have a laptop with win 98 but that is a pretty old OS. No way to register the software without contacting Viking to ask them to allow you to register her old software unless she sent you the reg numbers. She can't transfer ownership to you without those numbers on a certificate. Only originators of the software can allow you to do that by overriding her registration. Contact VSM and ask them if they will do this so you can use it.

May 26, 2009 | Husqvarna Designer I

1 Answer

Embroidery downloads baby lock ellure plus


If not a USB model, you have to get the disgustingly expensive Babylock palette box ($500) and software with the blank card to transfer the designs from cd or files. Beware of making the embroidery too small, it can make the stitch density too great and then the machine cannot sew the design. There is software called Density Works to deal with this problem.

Apr 04, 2008 | Baby Lock Ellure

2 Answers

Downloads to iMac


Google "BriTon Leap" for solutions for using your iMac. They have programs called Embrilliance, which works with iMac

Mar 12, 2008 | Brother SE-270D Computerized Sewing...

2 Answers

Cannot get Janome 10001 to read via USB direct link from computer


here's how I do it.
1. Get the design into jef or sew format (the only kinds janome reads). You probably already knew this, but some newbies try to use pes or art files.
2. Save it onto your computer (and remember the name of the file). I have a folder in my computer labelled "embroidery files" and then have subfolders dividing up those designs - such as animals, flowers, fonts.
3. Hook your sewing machine up to the computer via the USB cable.
4. Pull up your Janome "Easy Transfer" program (it came as a CD with your machine - this is NOT the customizing software).
5. Use that program to find your embroidery file. It's not going to show sew and jef in the same file - you'll have to switch back and forth.
6. On your sewing machine, click on the bottom button (under the screen) that shows the computer to the sewing machine (the third one).
7. Now click on the computer software "write to machine" or whatever it's called (it will be on the top tool bar).
8. Your file will be written to the sewing machine's memory and organized by the embroidery hoop size (A, B, C).
9. It will stay in the sewing machine memory until you use the cable hookup to delete it (reverse of the writing).
10. The 10001 software ate lots of the resident memory in the sewing machine - you can't store as many designs in it as the 10000 would allow. That's perfectly ok, as it only takes a few moments to move designs in and out of the machine.

To be perfectly honest, I vastly prefer doing the USB cable transfer to using the memory card jammed into the card reader deal. It's easy and quick.

Oct 30, 2007 | Janome Memory Craft 9500 Computerized...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1128 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...