Question about Magic Bullet Nutribullet Blender

Open Question

Lubricate the activators. Sticking seems to be a common problem. I was able to free them using brute force. Now that they are free, I would like to prevent this from happening again.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The jug part is stuck on motor , how can I separate the two parts ?


Brute Force, but make sure you are turning the top anticlockwise. Have two people with dishwashing rubber gloves for grip. One holds the base one the worktop and the other turns.

Apr 14, 2016 | VillaWare Blvllaz05h 2 Litre Jug Blender...

1 Answer

How do I lubricate the ice shaver rod-it squeaks and with what kind of lubricant?


If you can visually see the rod, use a few drops of cooking oil. If it leaks into any drink, you wont get sick. Don't use mineral oils.

Feb 29, 2016 | Nostalgia Electrics MOS-400 Counter Top...

1 Answer

Can I ger instrctions on how to put a blade on my electric clippers?


Most common problem is the mounting tongue snapping shut leaving you nothing to mount the blade on. If the tongue is not sticking out so you can put the blade mounting into it then stick a screwdriver behind it and make it come open. The tongue is a flat piece of metal at the front with 2 lines pressed into it. When it is hanging out pop the blade onto it, turn the motor on and snap the blade shut forcefully.

Feb 17, 2015 | Oster PowerMax 2-Speed Clipper Kit

1 Answer

Kitchenaide blender pitcher blade assembly sticks


You need to lock the blades from turning and undo the bottom clutch drive in such a way as you do not damage it. I use an old motor clutch drive to undo them myself. It has a left hand thread and a block of wood to hold the blade. Then you can remove the blade with shaft from the brass bush to clean and lubricate it. If the brass bush has moved up in the plastic housing you need to press/bang it down again. Then reassemble. If you wreck the clutch drive on the blade you will need to buy a new blade assy if it is separate to the beaker, if not you will need a beaker and blade unit complete.

Jun 23, 2014 | KitchenAid KSB560 5 Speed Blender

1 Answer

How to lubricate blade assembly.


You need to lock the blades from turning and undo the bottom clutch drive in such a way as you do not damage it. I use an old motor clutch drive to undo them myself. It has a left hand thread and a block of wood to hold the blade. Then you can remove the blade with shaft from the brass bush to clean and lubricate it. If the brass bush has moved up in the plastic housing you need to press/bang it down again. Then reassemble. If you wreck the clutch drive on the blade you will need to buy a new blade assy if it is separate to the beaker, if not you will need a beaker and blade unit complete.

Jun 23, 2014 | KitchenAid KSB560 5 Speed Blender

5 Answers

I have an oster My Blend with the blade stuck in the base. Any ideas on how to get it out? Model BLSTPB-WBL


None of these people understand your question. The blade assembly is stuck in the blender base and will not untwist out of the base. The sport bottle untwists off the blade assembly leaving it in the blender base. I've tried using pliers on mine after taking it apart. Something is binding it from untwisting. What is the trick to untwist the blade assembly off the blender base?

Jul 23, 2012 | Oster Blenders

1 Answer

The blade in my Super 5000 wet container turns very stiffly.Should I take it off and lubricate it? There also seems to be water visible under the bottom of the container.


Stiff or stuck blade problems can be fixed by replacing the two bearings and seal inside the blade assembly. Care must be taken in installing the new bearings as not to damage them. Ideally they should be pressed in, on a press, but they can carefully be tapped in using a sockets to match inner and outer races so your not tapping on the balls.

Mar 20, 2011 | Vitamix 5000 Work Top Blender

1 Answer

The jar of the ge single serve blender got struck. How to fix it


Most likely the problem is caused because the base is not screwed all the way on to the jar. This could be from just not turning it on all the way or it could loosen while running. Make sure the base is tightly closed before putting is into the power unit. To remove it you can lubricate the tabs with some vegetable oil and then force it. GE service suggested that. I have heard of two people joining forces to get it off without apparently damaging it but no guaranty's. If you have the reciept it should have a two year warranty, at least mine does.

Dec 01, 2010 | GE Blenders

1 Answer

The handheld blender makes a horrible screeching noise all the time. I don't see anywhere to lubricate it or even take it apart. What's a person to do?


Time to use your warranty or throw it out. Not a serviceable product, you can't order a set of bearings for this. sorry

Aug 06, 2009 | Cuisinart CSB-33 Quick Prep Handheld...

Not finding what you are looking for?
Magic Bullet Nutribullet Blender Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Bullet Blenders Experts

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14548 Answers

R.A. Ellis
R.A. Ellis

Level 3 Expert

8899 Answers

Are you a Magic Bullet Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...