Question about Garden

1 Answer

I shoot my 30-06 Remington an now the trigger an the bolt is stuck

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

1) If the round did not discharge, you must take this to a qualified gunsmith as the riffle could discharge when manipulating the bolt, safety, trigger, or due to mechanical shock. Make sure you transport the rifle with the muzzle pointed at something that can stop the bullet - consider a sandbag, phone books or several pieces of wood. Do not carry it in to the shop, ask them to come out and assess the gun

2) If the round discharged, do the following:

Empty the clip
Point the gun towards a safe location
try pushing the bolt forward and then rotating the bolt, once it moves do not put any forward or back pressure on the bolt

Failing that, repeat the process with the trigger pulled

IF THERE IS A LIVE ROUND IN THE CHAMBER YOU COULD GET A BLOWBACK SO DO NOT DO THIS IF THE ROUND IN THE CHAMGER DID NOT DISCHARGE

Failing that, remove the trigger assembly if you know how

I highly recommend going to a gunsmith as the gun is not longer trustworthy once the bolt tangs are in question

If you want to see the results - look up blowback - think the entire bolt going through your eye and out the side of your head - seriously - bolt failures are extremely dangerous.

Posted on Nov 19, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Remington 512. It will fire just my closing the bolt without touching the trigger. What can be wrong?


I would highly recommend going to an arms forum, specific to your manufacturer for lots of advice:

RemingtonOwners com Index page

Jan 09, 2015 | Remington Garden

1 Answer

Charging handle frozen


Drift the two trigger group pins out, drop out he trigger group and look into the bottom. The linkage between the bolt and action bars is probably the problem.

Jul 15, 2014 | Remington 552 BDL Speedmaster Deluxe 22LR...

1 Answer

Trigger on my Remington model 582 22 is froze up


Light lubes will freeze in cold weather. Try lubricating with a heavier lube. Any moisture onto bolt the isn't properly lubed will freeze the bolt or trigger assembly.

Sep 21, 2013 | Leupold 56512 Rifleman Remington 7400...

1 Answer

Marlin rifle model 795 jams intermittently


It takes about 250 rounds to break in a gun. Try some hotter ammo and see if the problem disappears, if so, call Marlin and ask them for their solution if you want to keep using Federal, you might want to try some Remington standard velocity target, it is very accurate in most guns.
I would shoot it for at least 500 rounds and clean it from powder debris in chamber and receiver bolt and trigger group and try it again, however don't hesitate to get a hold of Marlin, they are nice folks.

Feb 12, 2013 | Marlin 795 Semi-Automatic -22LR Rimfire...

1 Answer

I just bought a Remington Model 742 Woodsmaster 30-06 at a large gunshow and noticed later that the bolt handle is only about 1/4 of an inch long, so it must have broken off at one point. Surely it was...


To remove the bolt, look at where the trigger enters the stock. There should be a little square/rectangle button right in front of it (inside the trigger guard, right in front of the trigger). Push that in and while holding it in, pull the bolt backwards (out). The bolt should come out pretty easy if you're holding the button in. Most gun shops can order a new bolt. Likewise, many of them carry diagrams/manuals or can get them for you. You may also find one online for free if you hunt/peck enough. I'm not sure about the plastic piece you are referring to. My Remington is steel all the way. No plastic on the bolt anywhere. The other option is to take the bolt to Cabela's or another gunsmith. Most of them (if they are competent) can repair the broken piece cheaper than buying a new bolt. They can also tell you if the plastic is normal. Just drop by with it and have them take a peek. estimates (and telling you if the plastic is normal) are usually free.

Jun 28, 2010 | Sport & Outdoor - Others

1 Answer

I have a remington modle 34 22 rifle and dont know how to remove the bolt


open bolt and slid backward while at the same time push trigger forward bolt will slid out

Feb 22, 2010 | Bushnell Optics

1 Answer

Remove bolt from 513 s remington rifle action


Point muzzle in safe direction.
Make sure it is unloaded chamber and clip !
Push safety off ( forward )
Pull trigger and pull bolt out at the same time.
Or sell to me ( have FFL ) just sold a 513 T that was to heavy for a old man.

Dec 02, 2009 | Remington Sport & Outdoor - Others

Not finding what you are looking for?
Garden Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

537 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...