Question about Televison & Video

1 Answer

Cant find where the antenna cable must plug into Tedelex Flat view TV Model EC-PD5000

TV is probably about 5 years old or older, I cannot see where the antenna must plug in at the back of the TV

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Televison & ... Master
  • 5,470 Answers

When looking at the back of the TV it is towards the bottom furthest right of all the connections!

Posted on Nov 16, 2014

Testimonial: "Thanks, but there is nothing there but a hole, I am not sure if my Mom's TV might be broken there or not as there are no antenna symbols at the back of the TV anywhere. Could I get antenna to go into DVD player first then from DVD to TV via HD cable, would this enable her to watch TV that way?"

  • 9 more comments 
  •  Mikey
    Mikey Nov 16, 2014

    Ok! It seems like the hole is where the aerial should go! I don't think the DVD will have an aerial connection, the only way is to connect the aerial to a TV receiver like SKY/Satelite/Cable box and then to TV via HDMI/Scart connection

  • Shirley Heidtmann
    Shirley Heidtmann Nov 17, 2014

    Hi, thanks, the cable is running from my lounge from the sattelite/dstv there, so I cannot get another decoder installed in the room. Is there any thing else I can do besides getting the TV fixed? Any other adaptions/fittings to the antenna cable that I could use?

  •  Mikey
    Mikey Nov 17, 2014

    Can you tell me what connections you have on the back of the TV?

  • Shirley Heidtmann
    Shirley Heidtmann Nov 17, 2014

    Hi, HDMI, VGA, Y2 Y1, PB2 PB1,PR2 PR1, R2 R1, L2 L1,AV2 AV1, S Video and the AV out, R L Video

  • Shirley Heidtmann
    Shirley Heidtmann Nov 17, 2014

    After the VGA cable there is a PC Audio before the Y2 etc

  • Shirley Heidtmann
    Shirley Heidtmann Nov 17, 2014

    sorry not cable but connection

  •  Mikey
    Mikey Nov 17, 2014

    The best solution would be to get another receiver to connect to the tedelex TV! You can get wireless video senders that would connect to your current receiver and transmit the signal wirelessly to the telexed TV, but you have to watch the same channel on both TVs!

  •  Mikey
    Mikey Nov 17, 2014

    The video senders connect using the SCART connections!

  • Shirley Heidtmann
    Shirley Heidtmann Nov 18, 2014

    What are SCART connections? Do you know if these video senders are available in Durban South Africa? By the way thanks so much for your time and help so far, much appreciated.

  •  Mikey
    Mikey Nov 18, 2014

    Scart connection is the AV1 & AV2 socket on TV! Ellies video sender connects using phono connections on your TV, local dealer Durban Upper Ground Floor Service Centre 909/911 Umgeni Road Stamford Hill Durban P.O. Box 47646 Greyville 4023 GPS Coordinates: -29.814601, 31.025434 T +27 31 303 3298 F +27 31 303 1508 E info@ellies.co.za

  • Shirley Heidtmann
    Shirley Heidtmann Nov 19, 2014

    Hi, after all of this I found out the unit is a monitor, found the instruction manual, but I also found and old VCR machine so I will give it a try tonight. Hopefully it works! Will let you know if all is okay, but once again thanks for all the help.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Tedelex EC-PD2000 42" plasma TV

Yes, I had the same problem, it happened after 14 months of my purchase, or just 2 months after expiry date of warranty. But remember they have 60,000 hours warranty on screen and this fault is part of screen (no picture J it is screen problem), I called LG, first they did not accept the claim but soon after I mentioned that I have done many research and this is very common problem due to use of faulty part or unreliable design, and if they don't fix it on their cost I will take legal action, one of the supervisor contacted me and after saying LALALALALALALALALALA accepted to send someone to fix with no cost. But I have found out they did to many others whom take this mater serious so it was not just me alone J They are aware of using faulty part is some ranges of their products and now this common problem appears, LG don’t like it and wants to somehow get away. ((((((((((So don’t let it happen))))))))) some of us paid around $5000 to $7000 when this TV came out, recently price went down to around $2000. CALL THEM and ask FIX or COURT? For sure they fix it for you free of charge J Imagine how much would it cost them to recall all TVs which they know is faulty?
Enjoy

Posted on Jun 08, 2008

SOURCE: my 5 year old samsung flat tv will not turn on

probably the power supply and could also be the L-main board

Posted on Jul 19, 2008

mistersony
  • 320 Answers

SOURCE: Periodic tv screen blackouts

The problem is your cable box. I know you said you replaced it, but I work on TV's everyday and, sorry to say this but cable box HDMI outputs have serious issues, like no or intermittent sound and video. I have seen customers exchange their cable boxes 5 and 6 times and still have the problem. Your best bet is to use the component outputs of your cable box, visually you will not see a picture difference between component and HDMI when using a cable box. Your other solution is to get satellite; I have NEVER seen an HDMI issue with a satellite box

Posted on Nov 26, 2008

  • 814 Answers

SOURCE: Losing signal intermittently every 1-5 minutes

This problem is probably due to weak signal strength from the cable to the television. Buy a signal amplifier for you cable line in and use another cable out of the amplifier output to your Television input signal source, This should bring up the signal strength for you.You could also have your cable company check the input signal strength to you house or apartment and see if the cable itself needs repairing or replacing.If this does not help with your problem , then you need to have your television tuners signal input circuit tested it may have weakened from age. This may be adjustable in the tuner box, but this is something for a service technician to determine. customer service number for Insignia is 1-877467-4289. Hope this helps you with your problem

Posted on May 13, 2009

  • 11 Answers

SOURCE: Panasonic flat panel just lost power while on,

Me the same some one please help!!

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have tedelex EC2159 remote codes it should be 3 digits not 4


Pilot remote control codes for TEDELEX:
30 results. Displaying page 1 of 1
NR Brand Model Type Pilot Supertel* Easytel Unitel 1 TEDELEX 1452 R/C P1679Y 2 TEDELEX 1452 TV P1679Y 3 TEDELEX 1455 TV P1655Y 4 TEDELEX 1458 TV P1655Y 5 TEDELEX 1459 TV P1655Y 6 TEDELEX 2052 TV P1679Y 7 TEDELEX 2056 TV P1690N 8 TEDELEX 2092 TV P1679Y 9 TEDELEX 2096 TV P1690N 10 TEDELEX 2098 TV P1655Y 11 TEDELEX 2099 TV P1655Y 12 TEDELEX 2122 TV P1545Y 13 TEDELEX 9227 TV P1690N 14 TEDELEX 9422 TV P1655Y 15 TEDELEX 9427 TV P1655Y 16 TEDELEX 9628 TV P4263 17 TEDELEX EC 2528 TV P4190N 18 TEDELEX EC 2909 TV P4264 19 TEDELEX G 148 TV P4263 20 TEDELEX G 149 TV P4263 21 TEDELEX G 202 TV P4263 22 TEDELEX G 209 TV P4263 23 TEDELEX N 9034 SA VCR P1814 24 TEDELEX RC 94 R/C P1655Y 25 TEDELEX RC 97-PI TV P4263 26 TEDELEX RC 98A R/C P4190N 27 TEDELEX RC 98D TV P4264 28 TEDELEX SOME MODELS VCR 29 TEDELEX SOME MODELS VCR P4205N 30 TEDELEX STUDIO 3000 G TV P1690N
* Note: Supertel, Minitel and PRO-TEL universal remote controls will share the same code.

Feb 26, 2017 | Televison & Video

1 Answer

Connecting to old Sanyo single RF CONNECTION plug.Not able to view menu operation program from AT103B ematic.Do I need a adapter for this old Tv for connections.Now I'm using a cable and antenna only.


If it is not a flat screen TV yes all TV signals are now digital so even if you are doing the cable and antenna thing you need a digital converter box to convert the signal from digital to analog. Not sure if they still sell them at Wal-Mart, but I am sure you can find one on-line.

Nov 08, 2016 | Sanyo Televison & Video

1 Answer

I hooked up my new Proscan TV to the antenna but it can't find any channels


You need to check the connection is tight from the antenna and also on the back of the tv. You may need to try another coaxial cable. Is your antenna powered, meaning does it have a power plug that needs to be plugged in? Is your tv an old crt television? You may need a converter box to be able to view digital channels. A signal booster may help you get more channels.

Your tv or antenna may be defective. You could try your antenna on another tv. If your other tv gets a signal, your tv's tuner could be bad. If the other tv goes not get a signal either your antenna could be bad. I hope this helps narrow down your problem.

Oct 22, 2016 | Proscan Televison & Video

1 Answer

I just got a tv (older model) flat screen Insignia. There is no hdmi on the tv. The tv i am replacing had hdmi. How do I connect the cable (digital converter box) to the tv?


Most cable boxes have a cable connection for standard antenna on older TV. Best suggestion would be to ask your cable company

Oct 10, 2016 | Insignia Televison & Video

2 Answers

Antenna not working anymore?


talk with a tv technician as to the capabilities of the tv set but you may need a better outdoor antenna if the signal has changed from am to digital or fm in your viewing area

Jan 20, 2016 | Westinghouse Televison & Video

1 Answer

Which program runs "copied" movies through the Tedelex HDMI - model EC-3293LCD?


If the TV has the ability to run video files from a USB stick, then it will be listed as a source. Select the source; something like Media Player.

The USB stick has to be formatted in the correct file format. Also, the movies themselves have to be in the correct format too e.g. DiVX, AVI etc.


Tedelex isn't a well known brand. There isn't good online support for the brand. You will have to read your user manual.

Post any future questions iin the forum marked Flat Panel Televisions

Sep 20, 2014 | Televison & Video

1 Answer

When I hook up my xbox 360 to a floor model flat screen that is probably 7 or 8 years old, there is sound but no picture. When we hook it up to our newer model flat screen everything works fine. Can you...


Are you trying to use HD? Component cables or HDMI? Component cables limit you to 720p. It's possible that your old TV doesn't support 720p or there is something wrong with the jacks. What sort of connections do you have?

Sep 03, 2010 | Microsoft Xbox 360 Console

1 Answer

We have an older model tv and can't figure out how to get the channels to above 69


Channels 2 to 69 are over the air - Antenna - channels.

Channels 2 to 125 (some duplication) are Cable channels.

There should be a way to switch your TV to Cable channels.
If it's really old there may be an Antenna/Cable toggle switch on the back of the TV.

Most newer TV's have a way to get a Menu that you can use to switch between Antenna and Cable. Check on your remote control.

If neither of those you'll probably need to buy a new TV.




Jul 20, 2010 | General Electric JASAV22730 Freeview DTV...

1 Answer

DO I NEED A DIGITAL CONVERTER TO OPERATE A 4 YEAR OLD JVC MODEL AV-32D305 WITH AN ANTENNA?


If you have cable running to your house, cable still uses RF and older TVs work fine. The problem comes when you try to grab stations from the air. The signal is still UHF, but the information riding on that UHF signal is digital, and will need a converter box to turn it back to analog so your older TV will understand it. . Cable: None needed. . Antenna: Need a box.

Nov 25, 2009 | JVC AV-32D305 32" TV

1 Answer

Tedelex EC-PD3000 Manual


go to the offical wesite of the manufacter

Sep 21, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5097 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...