Question about Sewing Machines

1 Answer

Brother disney innovis 500d partway through embroidery the machine stops, beeps & the screen goes blanks. I am unable to do anything apart from turn the machine off. Help please?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Sewing Machines Master
  • 631 Answers

I'm wondering if it is able to turn on after a short while? this brother is equipped with a computer and like other computers it can overheat and shut off to prevent destroying the computer. i don't have a repair manual so this is not a guaranteed answer. anyway, try to use a cooler room and make sure there isn't any fabric or anything else around the sewing machine. this will keep the computer from cooling down. it is maybe helpful to move the machine a small distance from the wall. anyway, this may help.

Posted on Nov 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brother innovis 4000D. Start stop buttons stuck in red, Machine beeping and screen light but blqnk


If your machine was serviced before purchase and now doesn't work, return it to be re-serviced and made functional.

Jul 05, 2016 | Brother InnovIs 4000D Computerized Sewing...

2 Answers

MY lights come on but the LCD screen is blank and it is beeping. Please help


Check that the LCD screen adjustment has not been dimmed or darkened. If that is not the case, then a component is or has most likely failed.

...

Dec 30, 2015 | Brother Sewing Machines

1 Answer

What memory stick will work on a innovis 4000d brother embroidery machine


Most memory sticks will work, but the smaller capacity sticks work the best.

If your stick has a lot of designs on it, the machine must read all the designs before bringing up any on the screen. Only keep a few on a tick at a time.

Sep 23, 2014 | Brother InnovIs 4000D Computerized Sewing...

1 Answer

Brother 4000D innovis machine....when I turn it on, it will not start up..the lcd screen is faintly lit, and the machine just beeps


I had the same problem Machine off! I took off the rectangular cover on the right side (had to pry it carefully} GENTLY Pushed in connections of wires to board and then plugged in and it worked!! I happened a couple of times They must vibrate loose. All I has to take apart was that rectangle cover

Jan 18, 2013 | Brother InnovIs 4000D Computerized Sewing...

1 Answer

My brother embroidery machine's lcd screen is blank


Hi.

On page 81 of your manual it says to adjust your LCD screen brightness.

If you can't find your manual... go here and download it.
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_PE_770%20%20%E2%80%93%20New!_EN_1819.PDF

Jul 13, 2012 | Brother Sewing Machines

1 Answer

Black line down middle of LCD screen Brother


the screen will have to be replaced is it under warranty?

Aug 27, 2010 | Brother InnovIs 4000D Computerized Sewing...

1 Answer

I need to oil my own machine, Brother Innovis 1500, I bought it in the US and brought it home to Saudi Arabia. The machine began acting up now and I'm trying to find info for oiling it. The under bobbin...


No oiling a computorized sewing machine. These areas are factory sealed and only serviced by a Brother tech.

Refer to the care and maintenance section of the manual for cleaning as this needs to be done more often with sewing/embroidery machines that have the drop-in bobbin.

Look for thread snips and lint.

Raise the needle to it's highest position before removing and replacing the bobbin case.

You can get a manual, if needed at the Brother website to view or download at no cost.

Eventually you will have to take the machine in for service. The site has a dealer locator, if needed.

Apr 29, 2010 | Brother Disney PE-180D Computerized Sewing...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...