Question about Smeg Dishwashers

1 Answer

Smeg dose not takein water

Fab28p6 s/n 70111 hasa stop taken in water when turned on

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

Is the dispenser door opening.....f not the the dispenser is faulty
It the dispenser is opening but the product dose remain plugged in the cavity, the top wash arm may not be turning.
Clean out all of the particles blocking the top spray arm holes and spin the arm to ensure ti turns freely.
Also check that there aren't any items placed it the top rack that could stop the arm from rotating freely.
Product not coming out of the dispenser id usually always due to the top spray arm . if it is blocked with particles you may not have been cleaning the filter in the sump properly and 'bits' of food ate passing th filter, Make sure the filter in the sump is well firmly in place.
The last important point is to always run the machine at 60 degrees or more You need temperature to do the job properly.

Posted on Nov 28, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have smeg built in dishwasher. Acts like running cycle but i don't think it's getting enough water. the soap tables are not dissoved. before if opened door during cycle lots of water but now none


Check water inlet filter, check for blockage at the stop valve .

The rubber washer does come loose and blocks/limits the flow into the dishwasher. The fill cycle is on a timer and any restrictions in the water connection will under-fill the unit.
Hope this helps?
548700_v_l-soavr15tiwcrglcekobpw2on-2-0.jpg

1075a9bf-3587-4069-9a6c-2d62a5f78ddd_1000-soavr15tiwcrglcekobpw2on-2-2.jpg

Jun 24, 2017 | Smeg Dishwashers

1 Answer

My xobox 360 disk trays come off the rail on 1 side after i tryed priseing it open after it wouldnt open. so now its poped off 1 side and wont fully close or open more than half a inch. so now its like at...


It is not a hard fix do you have it taken apart all the way if not you have to take the drive all the way out.Is it a slim model or a phat model.If you play online you can message me on XBOX live mt GT is DrivableJr
and i can help you fix any problems or i can repair it for you or even exchange your system for a working one with tracking numbers included i do this for a living i am a repair vendor for our local pawnshops and Arrons and Rent-a-Center with lots of referances but if nothing else i can go on a video chat with you and show you how to open and repair it

Apr 12, 2013 | Microsoft Xbox 360 Console

1 Answer

Smeg FA561X Side By Side Refrigerator ice maker not working


Take the water line loose from the back of your refrigerator and check the line, it maybe cloged with something. But first turn off the water.

Jan 22, 2013 | Smeg FA561X Side by Side Refrigerator

2 Answers

The door on my Smeg Allegra front-loader washing does not open


SOME MACHINES HAVE A DELAYED OPENING TIME SO THE DOOR DOSE NOT OPEN WHEN BUTTON PRESSED LOOK IN MANUNAL TO SEE IF THIS FEATURE IS ON MACHINE IF NOT PROBLEM THEN NEW DOOR LOCK WOULD BE IN ORDER

Dec 30, 2009 | Washing Machines

3 Answers

Smeg WD1 12C, error code 10


I have a smeg wd1 12c washer dryer showing error code e01 any idea how to fix it?
Gilly

Nov 06, 2008 | Smeg WDI12 Front Load Washer / Dryer

1 Answer

My Smeg dishwasher DWF 64 SSE won't go onto rinse or dry


Easy one first try this to see if it helps

Water pre-heating
Your dishwasher may pre-heat the water. If so, and if the water entering the dishwasher is cool, the heater may take up to half an hour to heat the water.

To avoid the wait, increase the incoming water temperature before turning on the dishwasher. Do that by running the kitchen sink faucet until the water runs hot. Or increase the temperature of the hot water to the entire house at the hot water heater.

Warning! To lessen the risk of scalding, don't set the hot water heater temperature higher than 120 degrees Fahrenheit.

Jan 29, 2008 | Smeg 24 in. DWF612WH Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Cleverer2

Level 2 Expert

298 Answers

paul
paul

Level 3 Expert

822 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...