Question about Dryers
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: My beko condenser tumble dryer
Looks daunting to start with but just done mine,
remove top and all rear covers and rear panel after removing drum split washer, pump hoses, belt and elec connection, remove the drum and you will see where the felt seal goes. i had some felt i cut to 12mm wide and siliconed it in place, left to dry for 6 hrs, now runs fine.
Posted on Feb 12, 2011
there is a reservoir in the base of the dryer which holds some condensing water prior to the pump pumping it to the holding tank at the top this has a float swith to tell the pump to come on and drain water to top tank this is probably stuck in the on position so the machine thinks it is always full of water and its waiting for you to empty it,you need to remove side panel and remove flost switch to clean, remove condenser and put youre hand in back of unit if its still very wet in there thats the problem should be bone dry at end of cycle.
hope this helps
Posted on Jul 22, 2009
SOURCE: Spins but no heat
Update - we solved the same problem by resetting the Stat. Follow the instructions posted by kevinwhiteho, but we found that you had to push on the opposite side of the Stat with your finger whilst pushing the pin onto the trip mechanism.
Posted on Jul 27, 2009
Tips for a great answer:
Nov 23, 2016 | Dryers
Jul 21, 2016 | Dryers
Mar 06, 2015 | Dryers
Mar 11, 2014 | Dryers
Jun 27, 2012 | Beko Washing Machines
Apr 20, 2010 | Dryers
126 people viewed this question
Usually answered in minutes!