Question about Emerson Televison & Video
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Ok, great.Look at the back panel and you can see four holes spaced 4" between the top and bottom, and 16" from side to side.
these are for universal mount.
I think this clears your problem
Posted on Jul 16, 2007
SOURCE: Attaching to wall mount
I want to remove my akai flat panel tv FROM the wall mount. The mount itself is attached to the wall by screws but it seems the tv had some type of nobs on the back that slid into slots on the mount. i cannot remember exactly how it was mounted 5 yrs ago. But the tv picture has blown and i need to remove it from the wall mount. I have tried lifting it to remove knobs on back of tv from slots but its seems locked. Can anyone help me with this problem.
Posted on May 15, 2008
I don't know the model in particular, but most of these sets can be wall mounted if you have the screw holes for the mounting plate in the back of the set.
What I believe the tech was telling you would be that it is best to not wall mount the set. The reason is that we found that we have been seeing a higher failure rate from sets being wall mounted. This is because the surface of the wall reflects some heat back in the set, and thus causes it to internaly run warmer. This is also the same from running a set inside of a cabinet. The complete surface area behind the set being very close to the wall surface blocks cooler air circulation. It is best to run these sets on a stand that is out in the opened at least 1 foot away from any wall surface.
Posted on Jun 28, 2008
I have the same TV, and I bought a mount with 4 connector holes. I was able to connect 3 of the 4 and it has been fine as the TV does not weigh too much. The TV was not designed with the current mode of either wall or stand mount. It was just intended for stand. I have had it on the wall for over 2 years.
Posted on Jan 02, 2010
SOURCE: I have a wall mount
The wall mounting kit should come with all kind of screws to attach the mounting barckets to the back of the TV. Most TV uses metric M5 or M6 screws for the mounting holes on the back of TV, you should be able to get them at HD or LOWE for about 35 cents each.
My kits come with a bunch of Metric screws. Do you have the instruction sheet of the mounting kit?
Posted on Aug 08, 2010
Tips for a great answer:
Nov 16, 2014 | Televison & Video
Nov 14, 2014 | Televison & Video
Mar 05, 2011 | OmniMount "OmniMount 23" to 42" 4in1 Flat...
Jun 24, 2009 | Philips 42FD9932 42 in. Plasma Television
Apr 23, 2008 | Televison & Video
Dec 03, 2007 | Toshiba 20HLV16 20 in. LCD Television
Jul 16, 2007 | Akai LCT3285TA 32 in. LCD Television
27 people viewed this question
Usually answered in minutes!