Question about Televison & Video

1 Answer

I have just got this TV. It want stay on blinks 3 to 4 times and turns off. What's wrong

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,198 Answers

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Posted on Nov 15, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong with my SHARP AQUOS LC-52LE832U TV?


Follow as per attached file. If problem not solved checked Power board some capacitor will be defective.
24888824-uiyjskm2k1iftrkqu1fm2l2h-5-0.jpg

Jul 30, 2014 | Sharp Aquos Televison & Video

1 Answer

Sony wega trinitron will not stay on


Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

Aug 22, 2012 | Sony FD Trinitron WEGA KD-36FS130 36" TV

1 Answer

Mitsubishi WS55859 turns on for 3 sec. then turns off


Ic's went out again. Did you check all the bias resistors? Must always look the board over for cold solder joints also.

Oct 22, 2009 | Televison & Video

1 Answer

Sentry RMC-10 remote can't 'discover' my tv's code


.there are several codes. try each one seperate.

1. press and hold setup button until the red light stays on.
2. press and release the desired mode button (example t. v.) the light will blink and then stay on.
3. enter one of the 4digit codes.
note: if the code is valid the light will turn off if it flashes it is an invalid code.
4. with the device on press the channel up and down. if the remote only controls some of the functions try another code.


CODES:1171,0116,0167,0176,0922


1.manually turn on the t.v.
2.press and hold the setup button.
3. press and release the tv button the light will blink once and then stay on.
4.press the channel button repeatedly up to 300 times until the device changes channels. the light will blink and then stay lit.
5. press and release the mute button to store the code the light will go off.

Aug 28, 2009 | Sentry SE-RMC10 Remote Control

2 Answers

Sony WEGA Trinitron SRS BBE 32'


Hi,
Please reply couple of questions about TV to guess what could be wrong.

1- How many times standby light blinks, there would be interval of 3 seconds in blinks so count pause to pause.

2- Please intimate exact model of TV, written on sticker pasted at back of TV. That will help me to check its schematics.

Hit " add a comment" button to reply.
Thanks.

May 03, 2009 | Sony FD Trinitron WEGA KV-29LS35 29" TV

2 Answers

Rca remote not programming with tv


I just got the same remote to work.  I did the auto scan method in the instructions.  turn on the tv, hold the tv and power button on the remote down until it stays lit.  Then press the play button, the remote will blink 10 times, press play again and the tv should turn off in a few blinks.  then when the remote finishes blinking, press the reverse button until the tv turns on again, when the tv turns on, press the stop button.  Hope this helps!

Mar 23, 2009 | iLO 2600 Television

1 Answer

Sony KP-65WS500 65 in.


Check your CRT boards on the end of the tubes for burn spots, and burnt components, check the resistors to make sure they are not shorted, burnt, and they read the correct resistance. Check the diodes to make sure they conduct in one direction only and are not shorted or open.

Mar 24, 2017 | Sony KP-65WS500 65" Rear Projection...

1 Answer

TV not staying on


I called a tech and it was a convergence issue. It cost $375 to fix.

Jul 05, 2008 | Panasonic PT-51HX42 51" Rear Projection...

1 Answer

Standby Blinks 5 times. Picture goes off but sound stays on. Only hookup is Digital Cable - help!


Plug the electricity to a surge protector. I fixed my that way. Try it and let us know.

Jun 28, 2008 | Sony KP-53HS10 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74198 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...