Question about Kenmore Dishwasher With Ultra Wash And Quiet Guard4 Black
Possibly low water pressure; possibly a clogged inlet screen on the inlet valve; possibly a bad inlet valve (replace it).
Posted on Jan 17, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
call sears, 1-800-4MY-HOME. They have a trouble-shooting department that will get rid of this problem. It is caused by water temperature being wrong at the start of the cycle.... blah, blah, blah. The representative will tell you to push a certain set of buttons in a certain order and that unlocks the dishwasher.
Sorry I don't know the sequence
Posted on Jul 01, 2008
Presuming that your circuit breaker is not tripped and you have power to the dishwasher, it appears that your thermo fuse is blown. You can replace it for around $20. It comes in a kit form or you can replace the thermo fuse for around $1. The part number is NTE 8096 Thermo Fuse 98 degrees Celsius and solder it in yourself. It is located on the circuit board that contains all the relays and the main computer chip. It clips on and off.
Posted on Sep 30, 2008
not a dumb question,
is the bottom dishes coming out clean? there is a chopper that breaks and will trap food and not clean the top rack.it is not easy to replace.but not impossible.
Posted on Oct 31, 2008
Yes the wash arm can be removed to get to the sump area. Take the model number for your dishwasher and enter it into a site like partselect.com. There you can get a blown up diagram of the components that need to be removed to get to the cause of the grind noise. Usually a seed or some other hard object has found its way down there.
Posted on Feb 26, 2009
I have a very similar dishwasher, with a very similar problem. I fixed it by removing debris from the water evacuator pump located towards the front of the bottom of the machine (the last motor before the drain hose. In my case, grape stems had clogged it up. Once emptied, it purrs once again. NOTE: don't disassemble the motor, just flush it out, there is an o-ring gasket that is a bear to re-install.
Posted on Sep 04, 2009
Tips for a great answer:
Nov 02, 2016 | Kenmore Dishwashers
Aug 22, 2014 | Kenmore Dishwashers
Jul 06, 2014 | Kenmore 24 in. 17482 / 17484 / 17489...
Jul 01, 2009 | Kenmore 24 in. 17482 / 17484 / 17489...
Jun 22, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher
May 30, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher
Feb 07, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher
Feb 06, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher
Oct 23, 2008 | Kenmore 24 in. 15932 Built-in Dishwasher
Jun 03, 2007 | Kenmore 24 in. 15932 Built-in Dishwasher
Jun 01, 2016 | Kenmore Dishwasher With Ultra Wash And...
Sep 28, 2013 | Kenmore Dishwasher With Ultra Wash And...
193 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: