Question about Sirius Satellite Radio Receiver

Open Question

How do I change the channel on the box to 100.3 so the radio comes in?

SDPIV1 Model. I need step by step instructions on how to reset the box to unused channel 100.3.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What's is the rep +100 in the vfo programming list?


What is the manufacturer,make and model number of your radio?

Mar 16, 2015 | Radio Communications

2 Answers

How do I change Ink Cartridges in Epson XP- 100 Printer


This video isn't the XP-100, but the instructions should be very similar.

Feb 22, 2015 | Epson Office Equipment & Supplies

1 Answer

Televison station won't scan


If you are receiving a "No Signal" error message, verify that:
  1. All of the cables physically connected to the TV and the input device are secure.
  2. The input device is turned on.
Your TV needs to scan for channels before it can show programming from an antenna, from cable TV when the cable comes directly from the wall (no cable box), or from a cable or satellite box connected to the TV with a coaxial (RF) cable. Do not scan for channels if you have a cable or satellite box connected using AV (Composite), Component, or HDMI cables. The box selects the channel, not the tuner inside your television. If you are not using the "TV" input, press the INPUT button on your remote until the correct input mode is selected.
To perform a channel scan using the coaxial input:
  1. Press the INPUT button on your remote to view your current input source. The TV (coaxial cable) input must be selected. This may appear as "TV," "ANT," or the channel and call letters of a station.
  2. If the TV input is not selected, press INPUT until the TV input mode is selected.
  3. Open the on-screen menu and select TV or Tuner option. (This varies by model.)
  4. Highlight Tuner Mode and select the correct option:
    • Antenna-over-the air signals from an antenna
    • Cable-direct from the wall cable TV, or a cable or satellite box connected to the TV with coaxial cable
  5. Select Auto Search or Auto Channel Scan. (This varies by model.)
  6. When the search reaches 100% complete, exit to the menu.
  7. Check the available channels:
    • Antenna or direct-from-wall cable-Press the Channel Up and Channel Down buttons on your VIZIO TV remote to view the available channels.
    • Cable or satellite box- Will return only one channel. Use the cable or satellite remote's Channel Up and Channel Down buttons.
If this does not resolve the issue, power cycle the TV and then re-run the channel scan:
  1. Turn off the TV.
  2. Unplug the TV from the electrical outlet.
  3. While the TV is unplugged from the wall, press and hold the Power button on the TV for 30 seconds.
  4. Release the power button.
  5. Plug the TV back into the electrical outlet.
  6. Turn on the TV.
Note: There is also an option to reset the TV to the factory default settings. This option is in either the SETUP or SYSTEM section of the on-screen menu. The option may be "Reset all settings", "System Reset," or "Reset & Admin." Consult your TV's user manual for the location and steps for resetting your model.
  1. Remove the coaxial cable from the DTV/TV connector on the back of your television and perform a channel scan to clear the existing channels. See the procedure above. This should not find any channels.
  2. Re-attach the coaxial cable to the DTV/TV connector and perform a new channel scan.
This video shows troubleshooting steps to use when a "No signal" message appears.

Jun 25, 2014 | RCA 46 46LA45RQ LCD TV

1 Answer

I accidently pressed the channel button on my remote instead of the volume button. I now have no picture or sound. I tried returning to the previous channel but it keeps saying " channel not...


Not familiar with your model, but the problem sounds generic. I am guessing your set is hooked to a cable tv box, and that is where you need to change channels. I also guess that when you changed channels on your TV you probably moved from channel 3 to either channel 2 or 4 and the cable tv box is not sending to those channels so you lose picture and sound. Now, more guessing, you try to put the channel back to 3 on your TV, but still nothing happens. OK, if close so far, there are a couple of things to try. First, be really sure you are actually going back to the same channel you started with. Assuming you don't actually have the signal coming in on an auxiliary line-in and that you had it coming in on a channel, you may need to reset the presets on the television so that it recognizes the one important channel the cable tv box is sending out -- just follow your television menu to select or set channels. There is one more possible easy problem ... I have seen this one happen, after getting the channel correct and reset, if it still doesn't work, you mght need to turn the set off and wait one minute, then turn it back on WHILE the cable box is ON. This can cause the set to RE-Latch onto the cable box signal. It really doesn't sound like something is truly broken or needs replacement, sounds more like a user error. If your set is still under warranty, just call the Panasonic hotline (find it in Google, and they may be able to walk you through exact instructions for your model). Hope this helps.

Aug 29, 2011 | Panasonic Viera TH-42PZ80U Plasma TV

1 Answer

Lost my instructions and don't know how to use


Lost my instructions for an older model microtalk. Has lock and mode at the bottom of the channel screen and up, down and a center "Call" button below that Belt clip covers model number.

Oct 28, 2010 | Cobra Microtalk 100 FRS Walkie Talkie...

2 Answers

Need instructions to reset my Midland weather alert radio. Time and channel for Amarilli, TX.


On the Midland Weather Radio WR-100 web page of this website, scroll down until you get to the "Manual" heading. There is a link there (WR-100 Weather/RDS Radio Manual); click it and your instructions manual will come up in a .pdf format. To get the frequency channel for Amarillo, go to this website- http://www.nws.noaa.gov/nwr/CntyCov/nwrTX.htm. I do not know what county you live, so you will have to look at every county listing that has your city name in its group. When you find the information you need, insert it into your radio.

Jun 07, 2010 | Midland WR-100 Weather/RDS Radio

1 Answer

I need a diagram of how to set up the analog converter box or instructions.


Hi,
I am posting the instructions of how to set up the analog converter box :-
Hope it will you.
· Things you’ll need:
Analog TV, antenna, two coaxial cable, and converter box

· Instructions:
Step 1
Unplug coaxial cable on the back of TV "antenna in" (RF) port
Step 2
Insert coaxial wire into the "antenna in" on the converter box
Step 3
Use second coaxial wire and plug in the converter box, "out to TV" port. Plug the other end into
“antenna in" on the TV
Step 4
Power on the converter box and TV. Change TV channel to 3 or 4. Follow on screen instruction to
Complete setup.
Step 5
After setup you will begin to see more channels than before with better clarity. Some stations will broadcast two or three channels. Enjoy

Please let us know if that was helpful enough.
Good Luck & Thanks,
Shiv.

Aug 18, 2009 | Televison & Video

1 Answer

Downloading new software to the box super


press menu then the installation change the top line scroll across 2 c an w then press automatic scan till 100% then pressexit when saved press exit again scroll dwn 2 channel edit an code oooo press ur red button twice then exit back 2 installation press 1570 4 nagravision an make sure ur emu is switched on then exit back 2 channels

Dec 07, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Cobra microtalk LI 7500 WX


fyi my Cobra microTALK LI7500-WX came out of the box with one of the radios slightly off frequency, limiting range to about 100 ft. I was able to use a counter to fix it. The freq adjust is under the front faceplate that covers and protects the LCD screen, pry it off to expose one tuning pot.

Nov 26, 2008 | Cobra Microtalk 100 FRS Walkie Talkie...

Not finding what you are looking for?
Sirius Satellite Radio Receiver Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sirius Audio Players & Recorders Experts

John
John

Level 2 Expert

509 Answers

Steve

Level 3 Expert

3287 Answers

Scott Thompson

Level 2 Expert

44 Answers

Are you a Sirius Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...