Why won't my unit turn on-front says goodbye

"Goodbye's (The Saddest Word)"

Mamma
You gave life to me
Turned a baby into a lady

Mamma
All you had to offer
Was the promise of a lifetime of love

Now I know
There is no other
Love like a mother's love for her child

And I know
A love so complete
Someday must leave
Must say goodbye

Goodbye's the saddest word I'll ever hear
Goodbye's the last time I will hold you near
Someday you'll say that word and I will cry
It'll break my heart to hear you say goodbye

Mamma
You gave love to me
Turned a young one into a woman

Mamma
All I ever needed
Was a guarantee of you loving me

'Cause I know
There is no other
Love like a mother's love for her child

And it hurts so
That something so strong
Someday will be gone, must say goodbye

Goodbye's the saddest word I'll ever hear
Goodbye's the last time I will hold you near
Someday you'll say that word and I will cry
It'll break my heart to hear you say goodbye

But the love you gave me will always live
You'll always be there every time I fall
You are to me the greatest love of all
You take my weakness and you make me strong
And I will always love you 'til forever comes

And when you need me
I'll be there for you always
I'll be there your whole life through
I'll be there this I promise you, Mamma

Mamma, I'll be
I'll be your beacon through the darkest nights
I'll be the wings that guide your broken flight
I'll be your shelter through the raging storm
And I will love you 'till forever comes

Goodbye's the saddest word I'll ever hear
Goodbye's the last time I will hold you near
Someday you'll say that word and I will cry
It'll break my heart to hear you say goodbye

'Till we meet again...
Until then...
Goodbye

Hi,is this a description of you request:UNIT LIGHTS UP/HORN WORKS BUT UNIT WILL NOT MOVE?

check washing machine wire plug. turn it open and check the wires.
are they fix accordingly.

Your ignition switch just waved goodbye and died.
The contacts inside it are copper and with the use and years, get worn out. I had the same problem with my bike.

You say that the lens moves a little, this is the case when required power is not sufficient,.
Remove the battery, clean the battery connecting terminals, recharge the battery and try it.

it has has a software crash, you will need to have the blue junction box unplugged to reset it, this may also not work and you may need new software putting into the parrot, if in doubt go to parrot.com and find an accredited engineer in your area.

Dan

I have the same problem. This works for some people, it didnt work for me. 1. Remove any discs 2. turn the unit off and unplug 3. wait about 20 secs and replug the power cord. 4. turn unit back on .Press dvd button on the remote to take unit to the dvd mode. 5.Using remote enter 76419. The display should say GOODBYE and go off. Press the power botton again to turn on and good luck

the sudden power cut-off can either blow the fuse or corrupt the system of DVDs.but, some DVDs has protection for this occurrence.try not to use it for sometime.then if it's well rested try turning it on see if is resets it's protection circuit.if not, a new unit or call a technician for it.

Protection means the unit is detecting a short somewhere. Disconnect speakers and components and attempt to power on the unit again. If it will power on with nothing connected, repeat the process (turn off, connect something, then power on) until you find the bad component or speaker.

It is receiving a signal to shutdown and restart. This sounds like the power on selector may be dirty or damaged. It may require disassembly to get to the switch or contact pad.

If all else fails, I recommend contacting a local car audio professional, or you may contact Clarion customer support directly by clicking here:

https://clarion.com/xe/en/user-support/inquiry/contactus

I trust this information has proven beneficial.