Question about Roland EGX-600 Benchtop Engraving Machine Pro Series

Open Question

Just bought a Roland EGX-600 and after reading manual and connecting to power (but not to computer yet) I tried to start machine. Machine starts but when I hit "enter" it gives a "One moment please" m

Machine will not initialize beyond "Just a moment please"

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 1138 Answers

SOURCE: Roland e09 read "midi error" when connected with

If you have the version 1 cable you need to download a driver. The details are at this link:http://www.cme-pro.com/en/news-detail.php?news_id=105

Posted on Nov 09, 2010

Ad
  • 5603 Answers

SOURCE: Hi There. I am having

I assume you have tried formatting the card in the BR900... sometimes formatting in the PC's doesn't work. read at this web page:

http://launch.groups.yahoo.com/group/BossBr/message/1905

Posted on Jul 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There are three small lights; when I turn the machine on, the middle light goes on first and then the other lights go on. When the machine starts, the middle light flickers or goes off completely.


plug in the charger and let it charge the battery for 6 hours
operator manuals --go google - and type in--user manual for acer aspire computer , model at3-600-ur33-- and down load the pdf version

Sep 16, 2017 | Acer Computers & Internet

1 Answer

Cutter not rotating when set to, correct fittings in place just judders and the engrave light flashes


Is the spindle motor OK? Try turning it with your fingers (POWER OFF). Also try taking the cutter out and rotating the empty collet (POWER ON) with your fingers.

The spindle motor may be dead.

Sep 03, 2013 | Roland EGX-30A Desktop Engraver

1 Answer

My roland vp-540 will start printing and then when busy printing it will just stop, if you go into your versawork on computer it just says not connected? What could be the problem?


Just one Question?
Do you have your LAN Cable tied with your AC power Cable?
I have th same problem on two VP540 after seven years of trouble free working. A few months ago I was reorganizing my shop and I tied up both cables to avoid tangle cables with machine wheels every time I move It.
I think that the noise produced by AC Voltage Affect the VP540 ethernet port.

Aug 14, 2012 | Roland VersaCAMM VP-540i

1 Answer

I have singer 2259. i dont know how the machine automatically threads the needle. I also want to know can i do embroidery with this machine, if so, how?


You do not have an embroidery machine, or an automatic threader. This is a basic sewing machine, you can free style embroider by covering the feed dogs and, using an embroidery hoop plus the darning foot but you don't have an embroidery attachment per se. Read your manual, if you do not have one go to www.singerco.com and download a free copy under customer support and save it to your computer. Embroidery machines usually start at $600 and up. $600 is a very basic one. If, you want one take that machine back and buy one from a place that gives lessons on it, (check out JoAnn's and private shops). You will enjoy it more if you know what all of the features are.

Jan 03, 2011 | Singer 2259 Sewing Machine

1 Answer

I bought a 1989 fzr 600 today and it started fine,ran fine all the way home(about 17 miles)got home turned it off, came out 10 min later and tried to start it and nothing,well tail lights still came on but...


Does this machine have an aftermarket fairing? If so, the wiring that normally connects everything together within the headlight shell may not have been done very well when extended into the fairing shell. The main fuse which is usually only a short distance from the battery and connected into the '+' wire from the battery (not the heavy cable that powers the starter) if blown, kills power to all lights, engine, and etc..

Jan 31, 2010 | 1991 Yamaha FZR 600

Not finding what you are looking for?
Roland EGX-600 Benchtop Engraving Machine Pro Series Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roland Computers & Internet Experts

Darren  Means
Darren Means

Level 2 Expert

45 Answers

Stu Morris K

Level 2 Expert

178 Answers

Gil Shultz

Level 3 Expert

3368 Answers

Are you a Roland Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...