How to import from my cell phone

You can't reset just the password you will have to reset the phone back to Factory spec.

Try opening the menu options and settings and looking for the option to change what buttons can do.

I believe that there is NO SIM card in your phone. See this site for specs:

http://theinformr.com/cell-phones/samsung-sph-m400/specs/

Remove the battery cover and check for it.

1. Connect the USB data cable to the cell phone and an empaty USB port on a computer.please wait a few second for windows to recognised the phone and display the "AutoPlay" window.
2. Click the "import pictures and videos" option in the Autoplay window then the "import setting" link.
3. Click" browse" and select a folder on your computer to save the photo from your mobile.
4. click the" Import" buttdon an wait a few seconds for window to copy the photo from the phone to the selected folder.
5. When windows copies all of the photos from the phone,a new windows Photo Gallery Window appears,displaying thumbnails of the imported images.
6. Disconnect USB cable from the cell phone and computer.
7. Use Windows Photo Gallery to view the pictures.

g" alt="25282246-gdc3ufgmlwaqnv2deqjxyac2-1-0.jpg">

plz tell me whats the input phone password of qmobile M400?

i need input phone password of q m400

It is possible that your model is supported for Windows 7, if it was manufactured before 2007. No models made prior to 2007 are supported.
If you look at this page of supported units, you will notice the Portege M400 has an asterisk beside it. Read the note at the bottom for those units so marked, your model would be one of those units.

Check out the bulletins on how to upgrade to Win7 here and see if your specific model is supported.

hi this could be several reasons for not working firstly it could have been liquid damaged /spillage etc check keys are they sticking when pressed if so you will need to remove panel and remove keypad and clean the unit iff this fails check lead at base of keypad entering the board this might have come lose or even broken away .you might even try changing the keypad if all fails hope this helps you

you need to get the device introduced to each other. Turn on the bluetooth on the computer. Check Control Panel, Programs(for Toshiba Blue Tooth) or Check device manger to make sure the blue tooth is not disabled. Check the manual that came with your phone. You will need to put them in find mode and they should find each other. Here is the Toshibe site and booth info: http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_docTOC.jsp?moid=1209152&ct=RG&soid=1328782&BV_SessionID=@@@@0630805741.1171140917@@@@&BV_EngineID=ccciaddkedlmlgicgfkceghdgngdgmn.0 Good Luck, Tim