How to mute EMBEDDED microphone on a panasonic HD avccam

If you have the right skills, a repair manual and tools, like a collimator and the software to align the lens elements feel free to do so. If you miss one of the things above, please contact a Panasonic certified repair centre and bring the lens there. First ask what it will cost.

Yes it is in setup you must go thru and resetup your device.

tally lights up at recording startup.

::Look EASIEST WAY OF THEM ALL RIGHT HERE::

[1] --> Right Click the Volume Icon at the bottom right corner of your screen [The Task bar].
[2] --> Click [Playback Devices]
[3] --> Right Click the [Speakers] Icon and click Properties
[4] --> Click the [Levels] Tab; and there you will see the Microphone Volume slider (The one at the very bottom of the "HD Audio output" and "PC Beep" sliders where you can un-mute the mic playback (By clicking the unmute icon, than slide the volume up to where you prefer it... Simple I hope I was able to help someone with this...

download new driver

you have to goto your control panel click start button at the taskbar of your PC then click control panel you will see settings, hardware for your PC locate the REALTEK HD SOUND EFFECT MANAGER...after that now youre in the settings for your audio click the microphone button there you'll see its muted or no voll at all uncheck it the silde to its higher vol for your mic and thats it...your mic is already unmuted

per page 10 of the manual, start a call then press up / down buttons to control mic volume. good luck

firmware up date go to onkyo homepage