Question about JVC RX-D202 Receiver

1 Answer

How do I setup jvc rx-d202 with out remote

How to set up with out remote

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • JVC Master
  • 74,383 Answers

Without a remote control, you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Posted on Nov 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Message volume fixed


Zone 2 Setup on the RX-V773 using the ZONE2/PRESENCE Extra Speakers The RX-V773 extra speaker terminals can power one set of speakers for Zone 2 or Presence speakers. If the extra speaker terminals are utilized then the RX-V773 cannot be set for Bi Amp (Surround Back/BI-AMP terminals). Setting the Extra Speaker Terminals Note: The RX-V773 remote control will be used to access the On Screen Menu of receiver. 1. Press the On Screen button on the remote control to enter the On Screen Menu. 2. The On Screen display should be displayed on the TV/Monitor. 3. Press the Arrow Down button on the remote until Setup comes up in the screen. 4. Press the Enter Button on the remote control. 5. The Setup Menu will come up across the TV/Monitor screen. 6. Use the Arrow Left & Right buttons on the remote to navigate to Speaker. 7. Press the Arrow Down button on the remote to select Manual Setup. 8. Press the Enter Button on the remote control to enter Speaker Manual Setup menu. 9. Speaker Manual Setup menu with Power Amp Assign highlighted will come up. 10. Press the Enter Button on the remote control to enter Power Amp Assign menu. 11. Speaker Manual Setup, Power Amp Assign menu will come up with Basic highlighted. 12. Press the Arrow Down button on the remote to select 7ch+1ZONE. 13. Press the Enter button on the remote to select 7ch+1ZONE. 14. Press the On Screen button to exit the on screen menu. To control Zone 2 using the RX-V773 remote, the switch at the upper left side (above the BD/DVD Scene button) of the remote must be set to Zone 2. To see the operations on the front of the Yamaha receiver you must press the Zone Control button on the front of the receiver. Note: Only analog signals can be sent to Zone 2. If you want to output the sound from Zone 2, connect an external component to USB Thumb drive, USB iPhone/iPod, Network, AV 5-6 or Audio 1-2 by analog connection. For AM/FM radio the antennas must be attached.

Aug 19, 2012 | Yamaha RX-V773

1 Answer

I need a set of instructions for programming a JVC remote control, RM-SRX7010J so that I can select several FM radio stations using the remote control. My stereo receiver is JVC RX-7010V. Thanks in...


Hi Will,


If you want to store preset station so that you can easily select your favorite FM station, instructions on how to do this are listed on the JVC RX-7010 User Guide (page 20-22). Remote control operation is also listed there. It is to long to write here.

Please download and save the Pdf file format of the user guide HERE.

Enter your email add and the confirmation number and then click "Download Now" to automatically begin the download. It is a safe website, I used it personally.


Kind Regards,

Mjsazon

Nov 24, 2011 | JVC RM-SRX7010J Remote Control

1 Answer

I plug in a regular subwoofer that i took out of a sharp stereo, but it dosnt do anything at all


Is there qan amplifier to power the sub - they use a lot of power.
Sub are great but they are not just a bolt on speaker.

Feb 25, 2011 | JVC RX-D202 Receiver

1 Answer

Optical audio not working


Two inputs on this receiver (DBS and DVD) can be either optical or analog... (e.g. RCA type stereo connectors) Use the Analog/Digital button on the remote to set the proper input type for the desired input.

Feb 09, 2010 | JVC RX-D202 Receiver

1 Answer

Turns on but turns off and will not play


This can happen if the speaker wires are shorted.

Nov 16, 2009 | JVC RX-D202 Receiver

1 Answer

Jvc rx 8000v sound sync


you have to go into the setup menu and tell it how you have the video hook up look in mannel for setup

Aug 23, 2009 | JVC RX-8000V Receiver

1 Answer

No subwoofer output


yes, you do have to set up the sub output in the reciever.

May 17, 2008 | JVC RX-8020V Receiver

1 Answer

No manual


Make sure you have audio out from TV plugged into receiver. I have both Logitech 520 and JVC. It could also be in your setup of the remote.

Feb 04, 2008 | JVC RX-6030V Receiver

Not finding what you are looking for?
JVC RX-D202 Receiver Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

 Grubhead
Grubhead

Level 3 Expert

5151 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...