Question about Sharp BD-HP24U Blu-Ray Player
Universal remote codes so I can play discs. Right now, without a remote I push play and it says cannot operate. I bought it without a remote and figure I need one in order to play them.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Well I Checked my data resources and saw that there are no hacks or tricks for Sharp yet... the only thing you can try doing now is to ask your Dealership if they can unlock the regions for you. I've searched everywhere but couldn't find anything for newer models like HDDVD or Blu-Ray players.
Sorry T_T But let's hope someone might be able to help as well..
Posted on Mar 31, 2009
I had the same problem - Fix - Go to the sharp web site and download the file HP21U_HP50U_PN902270. You will need to make sure your thumb drive is no bigger than 4gb and you do not have any other files on it. Once you download the file on the thumb drive, you will need to unzip the file on the same thumb drive. The zip file is one of the new ones, so you might need to go to the web and get a shareware program that will open it. After this - turn your player on and go to setting, next scroll down to update firmware, insert the drive and tell it OK, it will ask you if this is OK, tell it OK and it will upgrade the firmware in about 2 min. I have already done this with 3 other players with no problem. Good luck. The sharp web site is sometimes a little hard to find and to me was not the most user friendly. good luck Pruitt43@yahoo.com
Posted on Mar 31, 2009
You need to force the player to the the Top Menu of the disc.
The way to do this is: load disc, wait until it says "Reading Completed" (about 1 minute).
Wait for the PLAY icon ">" to show in the upper right corner (this may take up to 30-40 secs).
Once you see the ">" Hit the STOP button on the remote to get to the player's splash screen.
From the Sharp splash screen Hit the "Top Menu/Title List" button on the remote and wait for the circulating dots and then the disc menu appears.
Play the movie from the menu and you should be good to go.
Posted on Sep 16, 2009
Try completing the update.
The update file can be found here http://www.sharpusa.com/CustomerSupport/ProductDownloads.aspx
Select bluray disc players
model not listed
type in model number
Then click on search
Click on the instructions and read thme if you need to. If you do not need to read the instructions click on the firmware and save it to your desktop. After the download has completed open the folder and click on extract all files under folder tasks, which should be on the left of the window nearer to the top.
At this time insert a 1, 2 or 4 GB flash drive into your computer. Then in the window click on next if you need to or browse and then my computer and then the icon of the usb device itself. Click on extract or next. When it is done safely remove the usb device from your computer by clicking on safely remove hardware located near the time on the bottom right hand side of the computer monitor.
Click on the usb device and click on stop. Remove it from the computer and place it in the back of the bluray player. Turn the tv and bluray player on as if you were going to view a bluray. There shouldn't be any discs inside. Press the setup button on the bluray remote control. Choose settings. Choose software update. Begin the update. After it is completed turn off the bluray player before removing the usb device.
If the usb device needs to be reformatted or if the zip file folder is placed on the usb device instead of the extracted file the download will not be successful.
Posted on May 11, 2010
You will need a 2GB usb device a.k.a. a flash drive. You will need access to the sharp web site. You can call 800-237-4277 any time between 9AM-7PM CST today or 7AM-7PM tomorrow to be walked through the software update you need from start to finish.
Posted on May 31, 2010
Tips for a great answer:
May 10, 2017 | Universal Televison & Video
Jan 19, 2016 | HP bd-2000 blu-ray player with 1080p...
Jan 18, 2016 | Astar DVD-3100 DVD Player
Jan 16, 2016 | Samsung Televison & Video
Jul 11, 2015 | GE 24927 Universal Remote Control
Apr 13, 2015 | Sansui Televison & Video
Oct 04, 2014 | Panasonic DMP-BD77 Blu-ray Disc Player -...
Jul 21, 2014 | Samsung BD-P1400 Blu-Ray Player
Dec 12, 2011 | Sharp BD-HP24U Blu-Ray Player
May 13, 2011 | Panasonic DVD-F87 Multi-disc DVD Player
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: