Question about Dryers
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a Little white thermal fuse in underneath the back panel. Remove panel and you will see to wires connected to a little white part on the exhaust beside the fan. If your dryer won't do anything that's what it is or your motor is fried. You normally have some warning sign before that happens like having to hold the start button down for a couple of seconds to get it to start. Good luck. Make sure you rate me.
Posted on Aug 21, 2010
SOURCE: Commercial dryer not getting hot
Check draft switch on back of dryer have had wire ties break and wires get in way of flap.Make sure when closing door when dryer running draft switch is pulling in.If it is not pulling in check for back drat flap inside where your exhaust is hooked up have had those stick closed or someone ran self taping screws in front of back draft flap.Also check transformer if it has the old g60 gray box on top of gas valve.Check voltage at valve
Posted on Aug 30, 2010
Tips for a great answer:
Apr 23, 2014 | Vitapur Energy Star Bottom Load Water...
Dec 30, 2009 | Dryers
Dec 27, 2009 | Kenmore 60172 Electric Commercial Dryer
Dec 18, 2009 | Kenmore 60172 Electric Commercial Dryer
81 people viewed this question
Usually answered in minutes!