Question about Dynex Televison & Video

1 Answer

<!-- from fixya rte -->Blue light on tv cant turn on off tv - Dynex Televison & Video

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dynex Master
  • 74,459 Answers

Do a reset to this TV and check. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Posted on Dec 08, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I tried to turn my tv on and the light turned blue for a couple of seconds and turned red again


Might be component failure.
Check your technical support first.
If they cant help, go for service centre.

Mar 22, 2014 | AOC L24H898 24 in. LCD TV

1 Answer

I have a acoustic solutions tv the light is blue but it keeps flashing so i cant turn my tv on any help will be appreciated


you should call the people that you bought the tv from. and see if youur warrenty is still not up if it is not you could get a better tv for free

Oct 10, 2013 | Televison & Video

1 Answer

Bush IDLCD26TV16HD blue flashing light?


It is on protection mode due to some defects on the board. Switch off the TV manually, remove the plug and cool it off for 48 hours and retry. If nothing works, better refer it to a qualified service technician.

Jul 18, 2012 | Bush Industries IDLCD26TV16HD LCD TV

1 Answer

The tv keeps randomly turning off, now i cant even turn it on, the light goes blue but the screen stays black


Sounds as if your back lights are not lighting, and that points to the high voltage power board. You may have the dreaded capacitor failure. Start with http://www.youtube.com/watch?v=YfO-KCQIYXQ&feature=related and look around.

Jan 27, 2011 | Dynex DX-L42-10A 42 in. LCD TV

1 Answer

I PROGRAM A REMOTE TO TV NOW I CANT GET IT TO TURN OFF SO I UNLPUG IT FROM THE WALL. NOW AFTER PLUGING IT BACK INTO THE WALL I CANT GET A PICTURE ALL I GET IS A BLUE POWER LIGHT


you seem to have the incorrect code to the tv this is not allowing you to turn the unit on try the main override switch at the side. appart from this you will need to keep scanning until you get the correct code

let me know if you need further help


sonic boom electronics australia

Jan 04, 2011 | Polaroid TLA-04011C 40 in. LCD TV

1 Answer

Blue power light is on the tv cant turn it off


Unplug the TV wait 10 Seconds and Plug it back in. Should work fine

Sep 26, 2009 | RCA L42FHD37 42 in. LCD HDTV

1 Answer

Tv lights blink, tv not turning on


HI, the fly back transformer has failed in your unit. this will occur if the dust level is high inside the set. the dust will settle on the cooper windings and, create an arch that will short out the entire power sector of this unit.

The fly back is usually the first to take the hit. replacing this will fix this issue.

Jul 11, 2009 | Televison & Video

1 Answer

Tv2 light does not come on


hi hammonhph! I will be more than glad to assist you in this concern. Lets program the remote for tv2, lets make sure that the battery's are brand new, please go to the front panel of the receiver, make sure that u have the remote2 with, turn on the the tv1, you got picture, on the front panel of the receiver, you got 1 green and the blue light is off.. push the power button on the front panel of the receiver once to turn off the green light, once its off the tv will show a black, blue or snowy screen, push the up button on the fron panel of the receiver until it shows the system information screen, look for the primary and secondary remote address, primary and secondary remote address should show a number on the white box ex.. 1 and 1 on the green box, secondary is ex 2 on the white box and 2 on the blue box, how to reporgram the remote to the receiver.. press and hold the sat button and wait until all lights lit up, once it all lit up, release it and press any number from (1 to 15) but for this ex is press 9, then press the pound button (#) that is under number 9, once you press the pound button the sat button will flash 3 times and then press the record button once, record button is under the cancel button or view tv button, once you are done check the secondary remote address, it should be 9 on the white box and 2 on the blue box, save the settings by using the remote 1, selct done on the screen and it will go back again to black, blue or snowy screen, press the sat button once on the remote 2 and the big red power button, the blue light should turn on, just in case the blue light dont turn on, press the power button on the front panel of the receiver for 10sec to reset the receiver, it will acquire the sat signal and go to a progress, and it will download the programming guide, check if blue light is not on, press the big red power button on the remote2 to turn on the blue light and it should work. if just incase the blue light dont turn on, the remote is bad and you need to call 1-800-333-3474 for the replacement of the remote..please feel free to get in touch if you have any query..

Jul 06, 2009 | DISH Network 322 DTV Receiver

1 Answer

I have PHILIPS 42pfl5332d/37. I was watching tv, and suddenly the screen goes blank. There's a blue light that turns on when the tv's on, however when the screen went blank, that blue light turned orange...


I don't have that problem, my problem is that I lost my remote control, so I can't configure de channels.. I just have 4.. =S.. I can see the menu, but in the part that say start configuration, I cant activated without the control, I don't know what to do.. aNybody Knows??

May 19, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Cindy Wells

Level 3 Expert

5183 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...