I have a 19" hitachi L19HP03U tv. I av the same problem as opus29jane in June cannot store any channels on my tv. Not computer literate don't no what to do HELP

i think in your TV...... design ..... is such that once channels are autostored it cannot be retuned ..... so you try this ...... it may work ......... disconnect tv antenna cable ( or local tv channels cable ) from your TV & then click autostoring (auto tunning ) ..... definitely it will scans (search for channels ) ..... but since no cable is connected no channels will get stored ...... but previously autostored channels will get removed ...... so now again connect your antenna cable or local tv cable & then click autostore ...... it will scan for channels .... like this you can retune ....... but remember again you may get same quality of picture which you got earlier ..... if you want better quality of picture you have to use signal amplifier (increases cables signal's strength - then picture quality improves ) .....

Normally there is a button on the remote or on the front of the TV itself labelled INPUT.

Just press this button repeatedly until the input mode selector changes from TV to VIDEO 1 or DVD or something similar.

The TV will then be ready to display the video signal from the device connected to the AV inputs.

Remember that the device (DVD player) has to be turned on or the TV will not show any incoming signal.

Please comment back here to this page if you have any details to add, have any questions, or just require further general assistance and I will respond as soon as I see it.

I hope that was helpful to you, good luck and take care.

Joe.

Is there a TV/AV button anywhere on your tv? If not get a universal remote so that you can change the inputs/AV channels

Try website like Remotes.com to buy the tv original or very colose to it.

None, channels are only on the tv source entry. The DVI is just another AV entry, to use it you just select it from the other AV sources.

Try this! Get into the menu and look for channel setup. See channel memory delete or save and add this to channel memory. Hope this works..I never repaired this model. This is only a suggestion.

DVD has AV out pins at rear, hook AV cable between DVD player out and TV AV input (yellow-red-white RCA pins) and select that AV input in TV by remote that you hooked DVD.
That will switch TV to that input and TV will show you DVD player picture.

memory ic is the problem if new claim for warranty if not buy a new ic but it need to reprogramme by copying memory ic from another working same tv

ohh..your memory ic corrupted change it but it need to program use memory ic copier to copy the ic first ok

have you tried buying a universal remote? you can get a decent one for £10 these days from any electrical store, such as curry's or maplins. it gives you a 3 digit code for the tv to link up with the remote and then you can switch over to av. some hitachi tv's also link up to av automatically if you connect your game station via scart socket (in the back of the tv) if you turn the tv off and link your wii up to the back and make sure the power is turned on before the tv is switched on, there's a chance the tv will auto detect the av channel. not all do but it's worth a try. hope this helps!