Question about Saeco Odea Giro Plus Coffee Maker
Saeco Odea giro plus. After pressing water drop button for 10 seconds I have found a problem. The descaling light and water drop is constant flashing, from time to time mashine removes water like it was doing coffee. The result is that it happens when machine starts and stops machine from working.
Is it possible the machine is not self priming? Try to run some water (not steam) thru the frothing wand...perhaps that will help.
Posted on Nov 13, 2014
Did you check if your hot water know was fully closed
Try turn off the machine, press the water drop button and turn on the machine . Keep pressing for 20 sec.
You may attached a recording video if problem not resolved
Posted on Nov 12, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Ok first check if the machine is in greenlight state when you press and hold the water button, as it will not work when the red exclamation mark blinking.
also check if the button work at all flipping back and forth to hot water and steam.
I have never had this problem that it dident work.
But remember this, you dont have to do the descaling again as that has nothing to do with the reset.
You can even reset the descaling alarm with out having done the descaling.
If that for some reason wouldent work I would think its the CPU card is not working.
Posted on Jul 14, 2008
The problem is with the flow meter which is a turbine unit that is installed before the pump.Either there is a blockage or the unit is bad.Have to open the machine to get into it.
Posted on Jan 21, 2010
That is the machine is saying to empty the drip tray, pull out the tray on the side and wait until the red light start flashing then put back the tray.
Posted on Jan 21, 2010
Tips for a great answer:
Jun 01, 2014 | Saeco Odea Giro Plus Coffee Maker
Nov 27, 2011 | Saeco Odea Giro Plus Coffee Maker
Sep 02, 2010 | Saeco Odea Giro Plus Coffee Maker
Aug 10, 2010 | Saeco Odea Giro Espresso Maker -...
May 27, 2010 | Saeco Odea Giro Plus Coffee Maker
Dec 15, 2009 | Saeco Odea Giro Plus Coffee Maker
Dec 02, 2009 | Saeco Odea Giro Plus Coffee Maker
Oct 14, 2016 | Saeco Odea Giro Plus Coffee Maker
445 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: