Question about Astoria Argenta SAE/JUN Espresso Machine

1 Answer

We get diff measurements on etraction. I tried calibratigit again and it will work for sometime then etracts more than the programmed measurements. sometimes during etraction it stops and the prog but

We get diff measurements on etraction. I tried calibratigit again and it will work for sometime then etracts more than the programmed measurements. sometimes during etraction it stops and the prog button lights and the four other buttons doesn't work anymore. then I have to reprogram again..what might be the cause of this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,618 Answers

The flow meter is clogged or the sensor is broken and flowmeter needs to be replaced.

Posted on Jul 28, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi We need the torque settings for a rear differential pinion nut and carrier bearings on a Isuzu 2,8 diesel frotier 2006 model


get the workshop manual or go see a diff repair shop
depending on the make of diff
some pinions are measured by a preload as the bearing spacer collapses to a set distance to give that preload
others have a solid spacer to get the setting
with the side bearings it is a preload measured at the crown wheel
everything is explained in the workshop manual

Sep 05, 2017 | Isuzu Cars & Trucks

1 Answer

Min./max backlash required on diff for Isuzu KB280DT 1998model after reconditioning & prior to "running in"


around .005" -.010" measured at the crown wheel tooth
if you have back lash at the pinion yoke , that is not the backlash you need to measure as it is a combination of axle spline and side gear clearance in the diff
what is most important is the mesh position of the crown wheel and pinion teeth, preload on the pinion bearings and diff carrier bearings
you will need a workshop manual to get the correct mesh setting and preload readings

Dec 28, 2016 | Isuzu Cars & Trucks

1 Answer

How to program diff remote


on most openers, you push the learning button on the motor unit, then you push the remote and then push the remote again to see if it works.

Apr 05, 2015 | Building Materials

1 Answer

Security light came on dash car will start but die out tried 2 different keys and same thinghow do i fix


this problem is quite common actually it seems as if the key has lost synchronization with the vehicle and needs to be re programmed sometimes it works if not you have a diff problem you can always call Priority Automotive Locksmith Services 8669997858

Mar 02, 2013 | 2000 Jeep Grand Cherokee

1 Answer

Whenever I play a music trick it always stop and start again near the end of the track. What is causing this problem?


update your audio drivers and try using a diff audio program i suggest winamp or windows media classic

Mar 14, 2011 | HP Compaq Business d530 PC Desktop

1 Answer

Abs warning light comes on and stays on whilst driving had abs system checked for codes comes up with no fault codes found. light cant be turned off until u switch off the engine and turn back on again....


if the sensor is located on the diff. sometimes the lube in diff gets lots of metal shaving and they collect on tip of abs sensor and cause it to ground out to triger light on if this is the case you have to have diff. flushed and refilled with fresh lube.

Dec 01, 2009 | 1996 Land Rover Discovery

1 Answer

Xbox 360 plays game but recently has no sound? tried diff powercord and diff tvs still same problem. help


try a different av cord.yellow,red,white cord or what ever cord that goes to your tv.sometimes the cord gets broke where the audio is at and sometimes the system has a setting where it won't project sound

Jun 30, 2009 | Microsoft Xbox 360 Console

1 Answer

Front diff been pushed back to far


Are you sure that your frame is not bent????? This will throw everything out of alliement. You will have to go from wheel to wheel and pull measurements like and X from side to side. fine the center point of the car and go from there. But it would be easer if you would put it on a frame machine!!!!!

Feb 07, 2009 | Toyota Land Cruiser Cars & Trucks

4 Answers

My computer does not detect my mp3 player sansa 4.0 gb


either unplugg it and try again or try a diff usb port

Jul 22, 2008 | SanDisk Sansa e260 MP3 Player

Not finding what you are looking for?
Astoria Argenta SAE/JUN Espresso Machine Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Astoria Coffee Makers & Espresso Machines Experts

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

NOEL
NOEL

Level 3 Expert

7561 Answers

Are you an Astoria Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...