Question about Express 795 Radar Detector

1 Answer

Why are there no audio alerts on my Beltronics Express 795 radar detector? The unit powers up and all alert lights work.. I've checked to ensure the "mute" button is off. I bought the unit new years

The Express 795 was a relatively low end unit made for Radio Shack and it satisfies my needs as I am only an occasional speeder and may go 5-10 miles over the speed limit on the interstate. Still, the alerts are a comfort since it's is great to know where "the boys" are hiding out so I can be sure to check my speed. The 795 handles K and Ka bands and is more than adequate for this so I don't need to invest in an expensive detector to get this peace of mind.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 214 Answers

I know this sounds silly but check and see if you set it to mute. Most detectors have this option either in the set up sequence or by pushing the volume button down.



\\\





but see if you accidentally set it to mute. Most detectors allow a mute setting and only light flash. This can b

Posted on Jan 19, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Beltronics Vector 985

If its still under warrenty Call Beltronics 800-341-2288 I had the same problem and they re-tuned the Detector and updated the firmware my Vector 985 was out of warrenty by 5 months and Bel repaired it for free. Hope this helps

Posted on Aug 06, 2007

  • 6 Answers

SOURCE: Beltronics Vector 995 does not start

They don't have batteries. :d.

Posted on Nov 08, 2008

  • 134 Answers

SOURCE: Need Help with my radar detector

Bel/Escort now use a special "high temp" speaker which resolves issues of blown speakers. They can replace the blown speaker inside your RD.

Posted on Apr 20, 2009

  • 134 Answers

SOURCE: no audio

Hi everyone,

Bel/Escort now uses a special and proprietary "high temp" speaker which resolves issues of speakers blowing due to high ambient temperatures or heat which builds up within the speaker when it is alerting for extended periods of time. If your RX65 is in warranty and you can make a photocopy of your sales receipt, then great! All you have to pay is shipping to Bel. Bell will replace the speaker with the new version, flash your RX65 with whatever the latest firmware is, and calibrate and test your RX65 too. So, all of this is peachy if your RX65 is under warranty.

If your RX65 is out-of-warranty or if it doesn't have a serial number or was bought from a non-authorized dealer, then the service charge as I recall is $80. Thats not bad since your RD will come back working like brand new.

A note about the speakers: They are made by PUI, but the speakers are proprietary to Bel/Escort. Thus you can not buy them from any source -- not even direct from PUI.

Posted on Apr 24, 2009

  • 134 Answers

SOURCE: BELTRONICS 940

This is a somewhat common problem that occurs when a strong voltage spike while starting your car damages the radar detector. Bel can fix your RD. Once you get it back, always start your car first before powering on your radar detector. Likewise, power off your radar detector before turning off your car's ignition.

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are there no audio alerts on my Beltronics Express Why is there no audion on my Beltronics Express 795 radar detector? The unit powers up and all alert lights work but there is no audio. I've chec


I should have mentioned if none of the suggestions work you may have a burned out speaker. The heat generated by the windshield dries the speakers out. I have had two speakers replaced in my Whistler 78 Pro in the last 5 or 6 years.

Nov 10, 2014 | Express 795 Radar Detector

1 Answer

Laser alert constantly goes off


Laser is very sensitive to false alarms often set off when driving by an airport, or military base. Set your laser on City Mode and pay attention exactly where it goes off. Mine goes off constantly in the same place which is a air force base in Tucson, AZ. Unless you drive like crazy shut it off in the city although the cops like to use a hand held one in school zones. In 6 years of driving in Arizona I have had one real laser alert, and other than false alerts, real ones are far and few in between. Check when and where the unit alerts and use different sensitivity settings. One more thing, if your laser warning goes off you already have the ticket since the cops use them at close range unlike the radar bands. Hope this helps.

Sep 29, 2014 | 2012 Pro Sti Magnum Dash Mount Radar...

1 Answer

Won't actually detect anything


does it work when near a walgreens or cvs and detect a K band? if it is no longer picking up any of the false alerts, return it if you can or send it in to beltronics

Jan 05, 2014 | V6 Radar And Laser Detector - Black

1 Answer

Constant RPM engine static during alert on 9500IX on Gold Wing Motorcycle. Only accessory to ever give engine static. Use multiple Apple music accessories, GPS, bluetooth, 80 watt amplifier, CB and...


Most likely you will need to get a group loop isolator for it. I think escort sells one on their site. Or a good quality car stereo shop can get you one from Escort or PAC.

Dec 30, 2010 | 9500IX Radar Detector

1 Answer

No sound on my vector 940


Beltronics is now using a special "high temperature" speaker which resolves issues with speakers blowing due to high ambient temperatures. Contact Beltronics and schedule service for your V940. Not only will Bel replace the speaker with the newer model, but they will also test and calibrate your V940 and install whatever the current firmware is for your V940.

Jun 22, 2009 | Vector 995 Radar Detector

1 Answer

Can a radar still display your locked speed if the unit is turned off. An officer gave me a ticket..  I was driving and saw the patrol car, my radar detector came on when he turned his on then he turned...


Yes. On many radar gun models the officer can lock your speed and turn the radar gun off, yet the radar gun will still display the locked speed. Officers are not required to show you the locked speed.

Apr 14, 2009 | STi-R Radar Detector

1 Answer

Reset to factory settings


have you tried the companies website? Beltronics lists models going back 4/5 yrs!

Apr 20, 2008 | Express 795 Radar Detector

2 Answers

How may I set the vg 2 on my express 795?


Entering Selectable Features Mode
1. With the unit OFF, press and hold the CITY button then press
the PWR/VOL button. The amber X LED will illuminate and a short
“beep” will sound.
2. Immediately after the “beep”, digit #1 will appear and indicate
the status of the sws™ Selectable Feature. To select digit #2 (VG-2
Guard®), press the CITY button again. To select digit #3 (sws™
Voice), press the CITY button a third time and to select digit #4
(Digital Voice prompts for Radar/Laser/VG-2 Guard®) press the
CITY button once again. Use the CITY button to select one of the
four digits.
3. If the selected digit is solid, feature is ON, but may be canceled
by pressing the AUDIO button. Two “beeps” and the flashing digit
will confirm feature is OFF.
4. If the selected digit is flashing, the feature is OFF, but may be
activated by pressing the AUDIO button. A single “beep” and
solid illumination will confirm the feature is ON.
5. Press the PWR/VOL button to retain your new settings for Selectable
Features. Two “beeps” will confirm that you have exited from
Selectable Features Mode and your unit will be ON.

Dec 09, 2007 | Express 795 Radar Detector

4 Answers

Beltronics pro rx65


false laser alerts when sun is low..

Nov 06, 2007 | Pro RX65 Radar Detector

Not finding what you are looking for?
Express 795 Radar Detector Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Beltronics Vehicle Parts & Accessories Experts

John Nolan

Level 2 Expert

347 Answers

Steve

Level 3 Expert

3287 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Beltronics Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...