Question about Garden

1 Answer

What kind of gas does a 2007 carb/US Weedeater take

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,169 Answers

87 or higher octane unleaded gasoline mixed 2 cycle engine oil at 40:1.

There is multi-mix engine oil produces a mix that can be used in any 2 cycle that needs 50:1 up to 16:1 oil mix. Makes it much simpler to have container of 2 fuel than several containers going bad.

Posted on Nov 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased the weedeater last year and it ran fine. This year I can only set the choke setting on #2. If I place the setting on #3 the motor will cut off. Please help. Thank you.


Its very important to drain fuel at end of season and use stabilizer but now the car will need to be cleaned you can do it yourself with carb cleaner that carb off and remove both covers spray real good hope it works if not new carb needed

May 03, 2015 | Garden

1 Answer

Trimmer/weedeater starts but when i apply the gas/accelerator it wants to die out on me, any solutions for this problem


buy a new carb from ebay for 12 bucks,it will cost more to clean the carb and rebuild it,use only non ethanol gas with small motors,ethanol kills carbs,should find that gas at any boat dealer

Apr 27, 2015 | Garden

1 Answer

Need "L" and "H" setting on carb mixture screws


Lightly seat the screws all the way in....then back them out about 1 and 1/2 turns. From there here is how to do the final Zama diaghragm carburetor adjustments.
http://www.zamacarb.com/tipspage.html

Oct 30, 2010 | Weedeater 2 Speed Gas Blower FL1500LE ()

1 Answer

I have a sears gas weedeater wii start then quits?


OK,could be several things. First Im assuming you have the right mixture in. The two fuel set screws on the carb may need adj,one is for high rev the other is for low end,this should be done by a proffesional. The carb could also need rebuilt and cleaned,it is deffinately in your carb though.

Aug 09, 2009 | Garden

1 Answer

Twist and Edge Weedeater will not start.


You will have to check all the hoses and carb gaskets/diaphrgms. Get the model # off you carb and buy a repair kit from http://www.m-and-d.com/STENS-ZAMA_repair_parts.html
replace the fuel hoses. Be careful to put them back in the correct configuration.

Aug 04, 2009 | Poulan 12" Electric Twist N Edge Plus...

3 Answers

Weedeater just Idles


Carb needs to be adjusted or removed and cleaned with solvent.

Jul 09, 2009 | Troy-Bilt 4-Cycle Curve Shaft Gas String...

2 Answers

Blowing gas out the air intake


Eight years is great for a weedeater! Blowing out can mean something is stuck in the reed valves, or one may be broken. They are just under the carb, usually. Be real careful with the gaskets. If you mess up any, silicone will do. Use good car gasket silicone.

Apr 30, 2009 | Ryobi 30 Cubic Centimeter Curved Shaft Gas...

2 Answers

Craftsman weedeater wont start


The problem that I had with my craftsman was that I found that there was a tube in the fuel tank that goes to the carb, & at the other end - inside the tank, there was a small screen with maybe a weight on it (to keep it in the gas no matter what position the weedeater is in). Mine was plugged up and i went to the saw shop and got a generic hose & end with the screen deal & changed them out. Solved my problem. Rick

Mar 24, 2009 | Poulan Genuine Weedeater Part # 36006-128

Not finding what you are looking for?
Garden Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

john h

Level 3 Expert

12104 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...